Luc Ok, will run with the new frequencies; will post the results later this evening. If we need the test program, I have no issues allowing it to run until it is complete.
thanks Rich On Wednesday, March 13, 2019 at 8:31:45 PM UTC-4, [email protected] wrote: > Hi, it’s me again! > > Rich, may be a last quick step to try, before writing a test program. > > What you can do is the following: > > Take the list of RFM69 frequencies in your spread sheet. > Sort them from low to high. > Subtract from each of the 51 frequencies the value 26062 (Hz) > Use these smaller (and sorted) frequencies in protogol.go > > Explanation: the frequencies of the original rtldavis program and the > sorted RFM69 frequencies all differ about 26000 Hz from each other. > > The sorted hop frequencies differ about 51000 Hz from their ‘neighbour’ > frequency, so an offset of 26000 Hz from the good frequency is too much as > we have seen. > > Test have already shown that the first frequency of rtldavis is good: we > received the data of both transmitters. The first RFM69 frequency differs > 26062 Hz with the first rtldavis frequency. > > Let me know if you like the idea or have any questions. > > Cheers, Luc
