Luc, Please don't use all caps. It's rude and is considered shouting per internet standards. Thanks. Since I have a lot of experience with these transmitters and receivers, I'm trying to help here. No need for the tone.
And, I was talking about the US frequency scan and the relation between the Arduino code table and the one in rtldavis, not the EU frequencies. Please read my messages again. Although the EU frequencies should be the same for both the Arduino code and the rtlsdr code. There is no difference in the transmitters. If one works with a given set of frequencies, so will the other. You're set out to ignore established facts and others' valuable research and their time spent with it. I'm not trying to tell anyone what to do, but I'd like to point that out and try to keep you from doing the hard work already done by others - that is what I meant by wrong path. I haven't myself sniffed the frequency tables, but I'm using the frequencies with success for years for the EU band. And those sniffed frequencies ARE the correct ones, according to multiple reports I have received during the years. So, in my opinion the culprit is most probably the FSK code itself or the stick's imprecise tuning. These are the 2 ones to consider first and foremost. The first is obviously wrong as the frequencies are shifted by a constant (possibly the original author's ppm error on his SDR radio). It can be easily fixed. The second - I have no experience in coding the FSK decoder part so I can't possibly work on that right now. If you do intend to do the scanning to verify the facts (which is a completely normal thing to do in a research), please consider the radio parameters I mentioned in my earlier posts. As soon as I have the necessary time, I'll test code thoroughly, you can count on me. On Saturday, March 16, 2019 at 8:02:01 PM UTC+1, [email protected] wrote: > > On Saturday, 16 March 2019 15:34:19 UTC-3, kobuki wrote: >> >> You're on the wrong path, guys. >> > > HI KOBUKI, > > I SUGGEST YOU FIRST INSTALL THE RTLDAVIS PROGRAM AN INSERT YOUR > FREQUENCIES IN THE EU TABLE. > THEN RUN THE PROGRAM AND TELL US WHAT WE ARE DOING WRONG. > > LUC >
