Hi, Off late, I see that wind speed and wind gust graph on WU are messed up. The wind speed graph is same as wind gust graph looks like. Also looking at WU upload protocol below:
https://feedback.weather.com/customer/en/portal/articles/2924682-pws-upload-protocol?b_id=17298 Looking at restx.py, I am not sure if weewx uploads the last 4 parameters below (attached at end of post). The LOOP2 packet in Davis does include these but weewx does not read LOOP2 packets. This issue has also probably arisen probably because of how WU is handling the data now with the recent updates. Not sure if the protocol below has changed as the older wiki page no longer works (if anyone has the older protocol from wiki please share). Strangely the WU table has different value for wind speed and gust however. (https://www.wunderground.com/dashboard/pws/IBANGALO9 to have a look at wind graphs) I was wondering if weewx should be reading these from LOOP2? I do not see them being calculated in software now and being sent either (if it is being done so, can someone share where it is being done?) Regards., Praveen winddir - [0-360 instantaneous wind direction] windspeedmph - [mph instantaneous wind speed] windgustmph - [mph current wind gust, using software specific time period] windgustdir - [0-360 using software specific time period]windspdmph_avg2m - [mph 2 minute average wind speed mph] winddir_avg2m - [0-360 2 minute average wind direction] windgustmph_10m - [mph past 10 minutes wind gust mph ] windgustdir_10m - [0-360 past 10 minutes wind gust direction] -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/7e87c4ec-176c-461a-aa4e-875ec8685972%40googlegroups.com.
