Hi Lucas, I‘ve seen that you have connected your solar sensor to the anemometer transmitter. I‘m planning to do the same. Is there anything I would have to consider when doing this?
Are there any setting I have to change for the Meteostick or in the Meteostick driver for weewx? Any changes to the database structure that I have to consider? Thanks! Manfred Am Montag, 2. Mai 2016 23:39:32 UTC+2 schrieb Lucas Heijst: > > Solar sensor connected to Anemometer Transport Kit. > > Today I connected my solar sensor on my anemometer transport kit. > > The idea is to place the solar sensor on a higher level than the iss where > the solar sensor is surrounded by trees and buildings. > It is known that this won't work on the Davis equipment because you can > define only one iss per console / datalogger. > > With the meteostick this wouldn't be a problem: you don't even have to > configure which stations are connected to the channels. > > Attached the picture of my solar sensor on the south side of my wind mast > and the solar graph. Left on the graph you see the readings of both Davis > and Meteostick. At 18:00 you only see the green line of the Meteostick data. > > Luc > -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/b50d2b8e-bbfa-415a-904c-ea9cec34dcba%40googlegroups.com.
