A few things to remember: 1. The console output from running WeeWX directly is not the output from the driver rather it is the resulting packet/records after all WeeWX services have been run (StdConvert, StdCaibrate, StdWXCalculate etc). Have a look at the [[Services]] stanza at the bottom of wwewx.conf, the console output comes from StdPrint so everything before StdPrint gets its go first. So StdWXCalculate has its go at augmenting the packet/record with any derived obs. When you only have temperature there is not to much it can add (eg heatindex, windchill require other obs) but maxSolarRad is solely dependent on time of day and lat/logn (and pyepehem) and rainRate takes a pretty simplistic view; if there is no rain then rainRate must be 0.
2. Refer to 1. Basically everything before StdPrint could be doing something to the packet/record. If you want to see just the driver output code the driver to be able to be run without WeeWX (which you have). If you want to see just the driver output from WeeWX then turn off all the data and process services (you may need StdConvert, not sure on that) Gary -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/52b2fa53-a0da-43b0-b187-6caf64a0d0a9%40googlegroups.com.
