Tom,
The following three weewx programs got a critical error after startup of
weewx version 4.0.0b14.
*CRITICAL __main__: Database OperationalError exception: (1054, "Unknown
column 'rain' in 'field list'")*
weewx_klim formerly running version 4.0.0.a4
weewx_mben formerly running version 3.9.1
weewx_tfrc formerly running version 3.9.1
Note:
Program weewx_klim (klimalogg driver) does not have a rain database field
Program weewx_mben (modbus energy monitor) does not have a rain database
field
All three programs use the same weewx_conf file with the old and with the
new weewx version.
What can be done to debug this?
Note: the syslog says (see attachment):
INFO weewx.wxservices: The following values will be calculated:
pressure=prefer_hardware, altimeter=prefer_hardware,
appTemp=prefer_hardware, barometer=prefer_hardware,
beaufort=prefer_hardware, cloudbase=prefer_hardware,
dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware,
humidex=prefer_hardware, inDewpoint=prefer_hardware,
maxSolarRad=prefer_hardware, rainRate=prefer_hardware,
windchill=prefer_hardware, windrun=prefer_hardware
while none of these values exist in the database.
Snippet of weewx.conf:
=====
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
##############################################################################
=====
Luc
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/7a6ad431-8806-48f1-b471-c39411de62f4%40googlegroups.com.
Mar 7 11:10:35 pi31 mben[2137] INFO __main__: Initializing weewx version
4.0.0b14
Mar 7 11:10:35 pi31 mben[2137] INFO __main__: Using Python 2.7.13 (default,
Sep 26 2018, 18:42:22) #012[GCC 6.3.0 20170516]
Mar 7 11:10:35 pi31 mben[2137] INFO __main__: Platform
Linux-4.14.98-v7+-armv7l-with-debian-9.8
Mar 7 11:10:35 pi31 mben[2137] INFO __main__: Locale is 'en_GB.UTF-8'
Mar 7 11:10:35 pi31 mben[2137] INFO __main__: PID file is
/var/run/weewx_mben.pid
Mar 7 11:10:35 pi31 mben[2141] INFO __main__: Using configuration file
/home/weewx/weewx_mben.conf
Mar 7 11:10:35 pi31 mben[2141] DEBUG __main__: Initializing engine
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Loading station type
ModbusEnergy (user.modbusenergy)
Mar 7 11:10:35 pi31 weewxd: ModbusEnergy: driver version is 0.11
Mar 7 11:10:35 pi31 weewxd: ModbusEnergy: debug_mben = 3
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdTimeSynch
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdTimeSynch
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdConvert
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: StdConvert target unit is
0x10
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdConvert
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdCalibrate
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdCalibrate
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdQC
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdQC
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.wxservices.StdWXCalculate
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.manager: Daily summary version is
2.0
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.wxservices: The following values
will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware,
appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware,
cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware,
heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware,
maxSolarRad=prefer_hardware, rainRate=prefer_hardware,
windchill=prefer_hardware, windrun=prefer_hardware
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.wxservices: The following algorithms
will be used for calculations: altimeter=aaASOS, maxSolarRad=RS
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.wxservices.StdWXCalculate
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
user.cmon.ComputerMonitor
Mar 7 11:10:35 pi31 weewxd: cmon: service version is 0.17
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.manager: Daily summary version is
2.0
Mar 7 11:10:35 pi31 weewxd: cmon: sysinfo: Linux pi31 4.14.98-v7+ #1200 SMP
Tue Feb 12 20:27:48 GMT 2019 armv7l
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: CPU implementer: 0x41
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: Features: half thumb fastmult vfp
edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: CPU architecture: 7
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: BogoMIPS: 76.80
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: Hardware: BCM2835
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: CPU revision: 4
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: CPU part: 0xd03
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: model name: ARMv7 Processor rev 4
(v7l)
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: Serial: 00000000496ca922
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: processor: 3
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: CPU variant: 0x0
Mar 7 11:10:35 pi31 weewxd: cmon: cpuinfo: Revision: a02082
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
user.cmon.ComputerMonitor
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
user.modbusenergy.ModbusEnergy
Mar 7 11:10:35 pi31 weewxd: ModbusEnergy: service version is 0.11
Mar 7 11:10:35 pi31 weewxd: ModbusEnergy: mben_service: debug_mben = 3
Mar 7 11:10:35 pi31 weewxd: ModbusEnergy: mben_service:
binding=mbendevices31_binding
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.manager: Daily summary version is
2.0
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
user.modbusenergy.ModbusEnergy
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdArchive
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Archive will use data
binding wx_binding
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Record generation will be
attempted in 'software'
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Using archive interval of 60
seconds (software record generation)
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Use LOOP data in hi/low
calculations: 1
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdArchive
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: No services in service
group restful_services
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdPrint
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdPrint
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Loading service
weewx.engine.StdReport
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Finished loading service
weewx.engine.StdReport
Mar 7 11:10:35 pi31 mben[2141] INFO __main__: Starting up weewx version
4.0.0b14
Mar 7 11:10:35 pi31 mben[2141] DEBUG weewx.engine: Station does not support
reading the time
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Using binding 'wx_binding'
to database 'weewx_mben31'
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.manager: Starting backfill of daily
summaries
Mar 7 11:10:35 pi31 mben[2141] INFO weewx.engine: Starting main packet loop.
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Current transaction
state - IDLE
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Running transaction
1
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: SEND: 0x1 0x4 0x0
0xc 0x0 0x2 0xb1 0xc8
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.client.sync: New Transaction
state 'SENDING'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'SENDING' to 'WAITING FOR REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: RECV: 0x1 0x4 0x4
0x43 0xf5 0xe0 0x57 0xf6 0xc
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Getting Frame
- 0x4 0x4 0x43 0xf5 0xe0 0x57
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.factory: Factory
Response[ReadInputRegistersResponse: 4]
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Frame
advanced, resetting header!!
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Adding transaction 1
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.payload: [17397, 57431]
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.payload: ['C\xf5', '\xe0W']
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Current transaction
state - TRANSACTION_COMPLETE
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Running transaction
2
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: SEND: 0x1 0x4 0x0
0xe 0x0 0x2 0x10 0x8
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Changing
state to IDLE - Last Frame End - 1583590236.91, Current Time stamp -
1583590236.92
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.client.sync: New Transaction
state 'SENDING'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'SENDING' to 'WAITING FOR REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: RECV: 0x1 0x4 0x4
0x43 0x3f 0x92 0x3d 0x72 0xbd
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Getting Frame
- 0x4 0x4 0x43 0x3f 0x92 0x3d
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.factory: Factory
Response[ReadInputRegistersResponse: 4]
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Frame
advanced, resetting header!!
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Adding transaction 2
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.payload: [17215, 37437]
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.payload: ['C?', '\x92=']
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Current transaction
state - TRANSACTION_COMPLETE
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Running transaction
3
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: SEND: 0x1 0x4 0x0
0x10 0x0 0x2 0x70 0xe
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Changing
state to IDLE - Last Frame End - 1583590236.95, Current Time stamp -
1583590236.96
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.client.sync: New Transaction
state 'SENDING'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'SENDING' to 'WAITING FOR REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: RECV: 0x1 0x4 0x4
0x43 0x3 0xf8 0x0 0x5d 0xc0
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Getting Frame
- 0x4 0x4 0x43 0x3 0xf8 0x0
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.factory: Factory
Response[ReadInputRegistersResponse: 4]
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.framer.rtu_framer: Frame
advanced, resetting header!!
Mar 7 11:10:36 pi31 mben[2141] DEBUG pymodbus.transaction: Adding transaction 3
Mar 7 11:10:37 pi31 mben[2141] DEBUG pymodbus.transaction: Changing
transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
Mar 7 11:10:37 pi31 mben[2141] DEBUG pymodbus.payload: [17155, 63488]
Mar 7 11:10:37 pi31 mben[2141] DEBUG pymodbus.payload: ['C\x03', '\xf8\x00']
Mar 7 11:10:37 pi31 mben[2141] INFO weewx.engine: Main loop exiting. Shutting
engine down.
Mar 7 11:10:37 pi31 weewxd: ModbusEnergy: mben service shutdown
Mar 7 11:10:37 pi31 mben[2141] CRITICAL __main__: Database OperationalError
exception: (1054, "Unknown column 'rain' in 'field list'")
Mar 7 11:10:37 pi31 mben[2141] CRITICAL __main__: **** Waiting 2 minutes
then retrying...
Mar 7 11:10:45 pi31 tfrc[2202] INFO __main__: Initializing weewx version
4.0.0b14
Mar 7 11:10:45 pi31 tfrc[2202] INFO __main__: Using Python 2.7.13 (default,
Sep 26 2018, 18:42:22) #012[GCC 6.3.0 20170516]
Mar 7 11:10:45 pi31 tfrc[2202] INFO __main__: Platform
Linux-4.14.98-v7+-armv7l-with-debian-9.8
Mar 7 11:10:45 pi31 tfrc[2202] INFO __main__: Locale is 'en_GB.UTF-8'
Mar 7 11:10:45 pi31 tfrc[2202] INFO __main__: PID file is
/var/run/weewx_tfrc.pid
Mar 7 11:10:45 pi31 tfrc[2206] INFO __main__: Using configuration file
/home/weewx/weewx_tfrc.conf
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Loading station type TFRC
(user.tfrc)
Mar 7 11:10:45 pi31 weewxd: tfrc: driver version is 0.3
Mar 7 11:10:45 pi31 weewxd: tfrc: sensor map is {u'temp1':
u'temperature.6A55.TFA_1Packet', u'humidity1': u'humidity.6A55.TFA_1Packet',
u'rssi1': u'rssi.6A55.TFA_1Packet', u'batteryStatus1':
u'lowbat.6A55.TFA_1Packet', u'temp2': u'temperature.7131.TFA_1Packet',
u'humidity2': u'humidity.7131.TFA_1Packet', u'rssi2': u'rssi.7131.TFA_1Packet',
u'batteryStatus2': u'lowbat.7131.TFA_1Packet', u'temp3':
u'temperature.6C85.TFA_1Packet', u'humidity3': u'humidity.6C85.TFA_1Packet',
u'rssi3': u'rssi.6C85.TFA_1Packet', u'batteryStatus3':
u'lowbat.6C85.TFA_1Packet', u'temp4': u'temperature.55C7.TFA_1Packet',
u'humidity4': u'humidity.55C7.TFA_1Packet', u'rssi4': u'rssi.55C7.TFA_1Packet',
u'batteryStatus4': u'lowbat.55C7.TFA_1Packet', u'temp5':
u'temperature.61AA.TFA_1Packet', u'humidity5': u'humidity.61AA.TFA_1Packet',
u'rssi5': u'rssi.61AA.TFA_1Packet', u'batteryStatus5':
u'lowbat.61AA.TFA_1Packet', u'temp6': u'temperature.4562.TFA_1Packet',
u'humidity6': u'humidity.4562.TFA_1Packet', u'rssi6': u'rssi.4562.TFA_1Packet',
u'batteryStatus6': u'lowbat.4562.TFA_1Packet', u'temp7':
u'temperature.52F4.TFA_1Packet', u'humidity7': u'humidity.52F4.TFA_1Packet',
u'rssi7': u'rssi.52F4.TFA_1Packet', u'batteryStatus7':
u'lowbat.52F4.TFA_1Packet', u'temp8': u'temperature.5565.TFA_1Packet',
u'humidity8': u'humidity.5565.TFA_1Packet', u'rssi8': u'rssi.5565.TFA_1Packet',
u'batteryStatus8': u'lowbat.5565.TFA_1Packet', u'temp9':
u'temperature.43B0.TFA_1Packet', u'humidity9': u'humidity.43B0.TFA_1Packet',
u'rssi9': u'rssi.43B0.TFA_1Packet', u'batteryStatus9':
u'lowbat.43B0.TFA_1Packet', u'temp10': u'temperature.0000.TFA_1Packet',
u'humidity10': u'humidity.0000.TFA_1Packet', u'rssi10':
u'rssi.0000.TFA_1Packet', u'batteryStatus10': u'lowbat.0000.TFA_1Packet'}
Mar 7 11:10:45 pi31 weewxd: tfrc: deltas is {}
Mar 7 11:10:45 pi31 weewxd: tfrc: startup process '/home/pi/tfrec/tfrec -D -T
1'
Mar 7 11:10:45 pi31 weewxd: tfrc: start async reader for stdout-thread
Mar 7 11:10:45 pi31 weewxd: tfrc: start async reader for stderr-thread
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: StdConvert target unit is
0x10
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.wxservices: The following values
will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware,
appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware,
cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware,
heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware,
maxSolarRad=prefer_hardware, rainRate=prefer_hardware,
windchill=prefer_hardware, windrun=prefer_hardware
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.wxservices: The following algorithms
will be used for calculations: altimeter=aaASOS, maxSolarRad=RS
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Archive will use data
binding wx_binding
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Record generation will be
attempted in 'software'
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Using archive interval of
300 seconds (software record generation)
Mar 7 11:10:45 pi31 tfrc[2206] INFO __main__: Starting up weewx version
4.0.0b14
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Using binding 'wx_binding'
to database 'weewx_tfrc31'
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.manager: Starting backfill of daily
summaries
Mar 7 11:10:45 pi31 tfrc[2206] INFO weewx.engine: Starting main packet loop.
Mar 7 11:10:46 pi31 weewxd: tfrc: info: Registering demod for TFA_1
KlimaLoggPro
Mar 7 11:10:46 pi31 weewxd: tfrc: info: AUTO GAIN
Mar 7 11:10:46 pi31 weewxd: tfrc: info: Frequency 868.2500MHz
Mar 7 11:10:46 pi31 weewxd: tfrc: info: Samplerate 1536000
Mar 7 11:10:46 pi31 weewxd: tfrc: info: START READ THREAD
Mar 7 11:10:49 pi31 weewxd: tfrc: tfa1: #000 1583590246 2d d4 45 62 87 12 42
60 70 56 b3 TFA1 ID 4562 +31.2 66% seq 7 lowbat 0 RSSI 79
Mar 7 11:10:49 pi31 tfrc[2206] INFO weewx.engine: Main loop exiting. Shutting
engine down.
Mar 7 11:10:49 pi31 weewxd: tfrc: shutdown process /home/pi/tfrec/tfrec -D -T 1
Mar 7 11:10:49 pi31 weewxd: tfrc: tfrec with pid 2228 killed
Mar 7 11:10:49 pi31 tfrc[2206] CRITICAL __main__: Database OperationalError
exception: (1054, "Unknown column 'rain' in 'field list'")
Mar 7 11:10:49 pi31 tfrc[2206] CRITICAL __main__: **** Waiting 2 minutes
then retrying...
