Just installed RTL_433 on the RPI3 Raspbian Buster and it works fine. I have the latest RTL-SDR software package (librtlsdr0-0.6-1) installed and the latest USB Libraries installed:
libusb-0.1-4 ver 2:0.1.12-32 libusb-1.0-0 ver 2:1.0.22-2 libusb-1.0-0-dev ver 2:1.0.22-2 Rich On Saturday, March 21, 2020 at 9:33:26 PM UTC-4, rich T wrote: > Luc > > First let me say, the driver works great when running on Raspbian Stretch. > I believe I been running the driver almost a year now without any issues. I > did just noticed there are USB issues with RTLSDR running Raspbian Buster > on RPI4, does that translate to RPI3s. > > Issue seems to be that the SDR or driver does not hear the ISS at all. If > I run RPI3 w/stretch in the same location, it hears the ISS within a > minute. Eventually, I would like to run the driver as a "stand alone" but > first I would need to learn some "golang" programming. > > Rich > > On Saturday, March 21, 2020 at 7:00:41 PM UTC-4, Lucas Heijst wrote: > >> Rich, >> >> I updated most of my RPIs to raspbian buster. >> Only the systems with rtlsdr got problems, so for those two systems I >> installed the latest version of raspbian stretch. >> Until now I didn’t find any solutions for raspbian buster on the internet. >> >> Luc >> >> On Friday, 20 March 2020 00:25:01 UTC-3, rich T wrote: >>> >>> Currently I’m running the RTLDavis driver for about a year now on a RPI >>> with Stretch as the OS with no issues. I decided to install the >>> RTLDavis driver on a RPI with Buster as the OS, but the driver seems to be >>> having issues. I installed driver IAW the instructions found at >>> *https://github.com/lheijst/rtldavis* >>> <https://github.com/lheijst/rtldavis> >>> When I start the driver, I get the following: >>> pi@raspberrypi:~ $ $GOPATH/bin/rtldavis -tr 1 -tf US >>> 22:24:33.805278 rtldavis.go VERSION=0.12 >>> 22:24:33.806647 tr=1 fc=0 ppm=0 gain=0 ex=0 maxmissed=51 actChan=[0] >>> maxChan=1 >>> 22:24:33.807837 BitRate: 19200 >>> 22:24:33.807900 SymbolLength: 14 >>> 22:24:33.808431 SampleRate: 268800 >>> 22:24:33.808640 Preamble: 1100101110001001 >>> 22:24:33.808683 PreambleSymbols: 16 >>> 22:24:33.809030 PreambleLength: 224 >>> 22:24:33.809271 PacketSymbols: 80 >>> 22:24:33.809494 PacketLength: 1120 >>> 22:24:33.809703 BlockSize: 512 >>> 22:24:33.809896 BufferLength: 2048 >>> Found Rafael Micro R820T tuner >>> 22:24:34.231572 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> Exact sample rate is: 268800.001367 Hz >>> 22:24:34.408971 GetTunerGain: 0 Db >>> 22:24:34.409069 SetFreqCorrection 0 ppm Successful >>> Allocating 1 zero-copy buffers >>> 22:24:34.415381 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:26:50.228986 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:26:50.229203 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:29:06.042898 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:29:06.043182 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:31:21.857356 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:31:21.857498 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:33:37.670725 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:33:37.670963 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:35:53.484568 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:35:53.484698 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:38:09.297676 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:38:09.297810 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:40:25.111236 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> 22:40:25.111951 Hop: {ChannelIdx:0 ChannelFreq:902419338 FreqError:0} >>> 22:42:40.925341 Init channels: wait max 135 seconds for a message of >>> each transmitter >>> Is anyone running this driver on RPI OS Buster? >>> >>> There is a conversation about this @ >>> https://groups.google.com/forum/#!topic/weewx-user/dUZ0OlEgQpg >>> >>> Thanks >>> Rich >>> >>> >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/bbb100a1-b016-4baa-b8be-ad4bfd27fd15%40googlegroups.com.
