Tom - more data for you. I did clean setup.py installs of 4.2.0 and
4.3.0b3 and then used wee_extension to install the weewx-nmea-xdr
installation. The resulting stanza added to weewx is different. The beta
strips all comments. The 4.2.0 behavior is far better even if it did miss
comments at the root level as you mentioned later in the thread in
weewx-users (link) <https://groups.google.com/g/weewx-user/c/1-GaFz5jsxE>
(beta 3)
======
# Options for extension 'xdr'
[XDR]
port = /dev/ttyACM0
baudrate = 9600
timeout = 5
max_packets = 5
[[sensor_map]]
pressure = P
outTemp = C
(4.2.0)
=====
# Options for extension 'xdr'
[XDR]
# The port where the NMEA source is located. Default is '/dev/ttyACM0'
port = /dev/ttyACM0
# Its baudrate. Default is '9600'.
baudrate = 9600
# How long to wait for an XDR packet before giving up. Default is 5
seconds.
timeout = 5
# Max number of NMEA packets to process during a LOOP event. Default is
5 packets
max_packets = 5
# Map from weewx names to sensor names. Only these types will be
processed.
# Typical sensor map:
[[sensor_map]]
pressure = P
outTemp = C
On Sunday, December 27, 2020 at 2:13:02 PM UTC-8 Vince Skahan wrote:
> Tom - did that extension installer update to write out all the comments
> from install.py into weewx.conf make it in ?
>
> I'm testing by installing/uninstalling
> https://github.com/tkeffer/weewx-nmea-xdr.git as the extension to use.
> wee_extension seems to be stripping all the comments in xdr_config out when
> wee_extension installs the extension. The idea of course was to include
> the comments when adding the stuff to weewx.conf.
>
> On Saturday, December 26, 2020 at 2:10:41 PM UTC-8 Tom Keffer wrote:
>
>> Version 4.3.0b3 is now available. This is likely to be the last beta
>> before general release.
>>
>> On Wed, Dec 23, 2020 at 6:58 AM Andy <[email protected]> wrote:
>>
>>> moved to mariadb today.
>>>
>>> <pre class="prettyprint">
>>> 75002 records transferred from source database 'kcameadow21.sdb' to
>>> destination database 'weewx' in 262.91 seconds.
>>> </pre>
>>> On Tuesday, December 22, 2020 at 12:58:17 PM UTC-8 Andy wrote:
>>>
>>>> I found the guide in the dev branch of the weewx repo.
>>>>
>>>> Andy
>>>>
>>>>
>>>> On Tue, Dec 22, 2020 at 12:23 PM Andy <[email protected]> wrote:
>>>>
>>>>> Changed how various undocumented parameters in [StdWXCalculate] are
>>>>> specified.
>>>>> The only one people are likely to have used is 'ignore_zero_wind'. Its
>>>>> name has
>>>>> changed to 'force_null', and it has been moved. See the Upgrading
>>>>> Guide.
>>>>>
>>>>> Where is the beta Upgrading Guide?
>>>>> On Saturday, December 19, 2020 at 6:20:27 AM UTC-8 Tom Keffer wrote:
>>>>>
>>>>>> Things are mostly under control, but what is undertested is MySQL.
>>>>>> I've tested pretty thoroughly under Debian, but only sporadically under
>>>>>> CentOS, and not at all under suse.
>>>>>>
>>>>>> -tk
>>>>>>
>>>>>> On Fri, Dec 18, 2020 at 6:45 PM Vince Skahan <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> Tom - do you need this one checked on the usual os suspects
>>>>>>> (centos/debian/ubuntu of both systemd+init.d variants) or is it safe to
>>>>>>> assume that you guys have already run the usual checks for os variances
>>>>>>> ?
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-development" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to [email protected].
>>>>>>>
>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-development/acda9bca-e34f-45fe-a524-7fb0cebfbc83n%40googlegroups.com
>>>>>>>
>>>>>>> <https://groups.google.com/d/msgid/weewx-development/acda9bca-e34f-45fe-a524-7fb0cebfbc83n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> --
>>>>>
>>>> You received this message because you are subscribed to a topic in the
>>>>> Google Groups "weewx-development" group.
>>>>> To unsubscribe from this topic, visit
>>>>> https://groups.google.com/d/topic/weewx-development/8UbCU0aODJc/unsubscribe
>>>>> .
>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>> [email protected].
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-development/bcef8fa2-4dd5-4ef4-90e6-56792e9b9f8bn%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-development/bcef8fa2-4dd5-4ef4-90e6-56792e9b9f8bn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-development" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>>
>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-development/e954db00-1c9a-47eb-8006-76d5acb8badan%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-development/e954db00-1c9a-47eb-8006-76d5acb8badan%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/85895566-1040-4cf0-b8e6-8fc0a9c4d0c9n%40googlegroups.com.
