I am about to purchase an Eno Scientific Well Watch 760. It has an RS232 and USB interface and I thought about using weewx to collect that data, store it in a data base and produce charts. I would have a pi 3 mounted in existing metal electrical cabinet by the well head. It would be connected to the device and use WiFi to connect to network.
There isn’t a lot of data to store. Time stamp and water level. The unit’s current settings could be stored with the record. The big issue I see is that the log interval could change. I may want to log every minute from 7AM to 10PM and once an hour during off hours. A couple of questions. 1. Am I nuts? Yes is an acceptable answer. I may be trying to plow a field with a sports car. 2. I’d need to write a driver and a service. Anything else? 3. Suggestions or a different another approach? Sill in the design phase. Waiting to confirm with my well guy he can install the 760 and electrical for my pi. Thanks, Oscar -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/993a1e01-4ba7-43fe-bd7d-b58bfdeaf474n%40googlegroups.com.
