I also set a limit in weewx.conf for leafTemp1. leafTemp1 = 0, 0, degree_F
Oct 12 19:00:14 weewx weewx[25634] WARNING weewx.qc: 2021-10-12 18:55:00 PDT (1634090100) Archive value 'leafTemp1' -26.0 outside limits (0.0, 0.0) Suggesting again, something is putting incorrect data into weewx.sdb for certain fields that have no real sensor. So to make sure I had the new Seasons skins, I apt remove weewx, then apt install python3-weewx_4.6.0b3-1_all.deb weewx# ls -l total 16 drwxr-xr-x 2 root root 4096 Oct 12 18:54 font drwxr-xr-x 2 root root 4096 Oct 12 18:54 lang drwxr-xr-x 2 root root 4096 Oct 12 18:54 NOAA -rw-r--r-- 1 root root 2732 Oct 12 18:52 sensors.inc On Tuesday, October 12, 2021 at 5:35:22 PM UTC-7 Bill Richter wrote: > > The first time I did it, I just did a apt install > python3-weewx_4.6.0b3-1_all.deb. I've not noticed a change log or I don't > recall any instructions for upgrading from 4.5.1 to 4.6.0.beta1. > > So when I downgraded I did a apt remove weewx, then installed beta2. Just > now I did an install to get to beta3 and added the battery patch. That > patch fixes the battery reading. > > First, > sqlite> update archive set leafWet2=NULL; > sqlite> select leafWet2 from archive where leafWet2 IS NOT NULL; > sqlite> > > (time passes, at least 5M) > > sqlite> select leafWet2 from archive where leafWet2 IS NOT NULL; > 8.0 > sqlite> > > And now I have data in leafWet2! > > On Tuesday, October 12, 2021 at 4:04:06 PM UTC-7 Tom Keffer wrote: > >> Bill, another question. Normally, when you upgrade between versions, the >> installer does not touch your skins. Are you running your old pre V4.6 >> Seasons skin? Or, the V4.6 skin? >> >> On Tue, Oct 12, 2021 at 2:27 PM Bill Richter <[email protected]> wrote: >> >>> Yes, I was thinking that based on the changes and the new value for >>> checking data first. Just not clear why the database has values, >>> unexpected. I'll set the values to NULL for the sensors that don't exist >>> but have data in the database. I feel lucky so, I'll try beta3 again. >>> >>> On Tuesday, October 12, 2021 at 2:15:36 PM UTC-7 Tom Keffer wrote: >>> >>>> Beta 3 uses the presence of data in the database to decide whether or >>>> not to produce a plot and/or include the data in the left-hand column. >>>> >>>> On Tue, Oct 12, 2021 at 11:46 AM Bill Richter <[email protected]> >>>> wrote: >>>> >>>>> By "Lots of new readings", do you mean in the templates? Or, plots? >>>>> >>>>> I mean new readings, leaf* and soil* in the left hand summary >>>>> high/low. >>>>> >>>>> I didn't think to check the database values (sqlite), since nothing >>>>> shows up in beta2 and I have nothing writing to those things like >>>>> soilMoist1. But imagine my surprise to see, yes there is non 0 data in >>>>> there. >>>>> >>>>> OK, so I don't think I want to delete the tables. Should the values >>>>> be set to 0 or NULL? It looks like the value should be set to NULL. The >>>>> puzzle for me is the difference between beta2 and beta3. As well as why >>>>> I >>>>> can't edit the skin to remove the generation of soilMoist1. On the other >>>>> hand, it would work 'normally' if the soilMoist1 was 0 or NULL. No idea >>>>> how those values would get in the database. >>>>> >>>>> >>>>> >>>>> On Tuesday, October 12, 2021 at 5:23:25 AM UTC-7 Tom Keffer wrote: >>>>> >>>>>> Thanks, Bill. >>>>>> >>>>>> The transmitter value was fixed in commit 378cd18 >>>>>> <https://github.com/weewx/weewx/commit/378cd18b42366391dba818dcd1d1581a509d46de> >>>>>> . >>>>>> >>>>>> By "Lots of new readings", do you mean in the templates? Or, plots? >>>>>> >>>>>> Sorry for the trouble! >>>>>> >>>>>> On Mon, Oct 11, 2021 at 8:49 PM Bill Richter <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> I was running V4.6.0. beta 2. I upgraded. Lots of new readings for >>>>>>> soil* leaf* with values for sensors my Davis Vantage doesn't have. >>>>>>> Also >>>>>>> the transmitter value went from OK to 0.00000. I thought these soil >>>>>>> and >>>>>>> leaf values (along with others that were new) were defined in the >>>>>>> seasons >>>>>>> skin. No luck in removing them. The lack a valid transmitter value >>>>>>> was >>>>>>> also a deal breaker. I've reverted from beta3 to beta2. I neglected >>>>>>> to >>>>>>> try the Standard skin while on beta3. No issues upgrading from beta1 >>>>>>> to >>>>>>> beta2. >>>>>>> >>>>>>> No I don't have a 'test' environment for this, so further >>>>>>> diagnostics are not easy. I think I might just wait until V4.6.0 and >>>>>>> upgrade then. This is the package I used, >>>>>>> python3-weewx_4.6.0b3-1_all.deb >>>>>>> On Tuesday, October 5, 2021 at 3:13:10 PM UTC-7 Tom Keffer wrote: >>>>>>> >>>>>>>> The Seasons skin has been parameterized. It should now work out of >>>>>>>> the box for any combination of types that appear in the extended wview >>>>>>>> schema. See PR #702 <https://github.com/weewx/weewx/pull/702>. >>>>>>>> >>>>>>>> http://weewx.com/downloads/development_versions/ >>>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-development" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-development/4dec109b-7d06-439c-953a-46fdfcc0b3abn%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-development/4dec109b-7d06-439c-953a-46fdfcc0b3abn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-development" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-development/199909aa-2fe7-4829-bd84-2f4e0a6dfd8dn%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-development/199909aa-2fe7-4829-bd84-2f4e0a6dfd8dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-development" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-development/48f63cae-debe-4ab8-908a-23e91e8f507cn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-development/48f63cae-debe-4ab8-908a-23e91e8f507cn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/4a036152-c87b-44ff-a2c8-aab357e13bc7n%40googlegroups.com.
