I am looking at the options off adding a server updated as posible with a time stamp and data as soon as received from a davis vantage. at least the wind data, other sensors can be at a lower rate which can be polled by my scada system.
I did find a couple on git hub as extra sensors with a modbus client, but I am looking at going theother way. however its a starting point. Breifly why, to correlate UV, rain and wind against lightning data to control a power isolation and initiate the genset. I have boltek ld350 which has relays for this but feel i would be better letting the scada decide. Second to corelate wind against some XYZ inertial sensors in a security arrangement. Is there some device driver similar in the code? Any where to look for info I have not found, or am I in uncherted waters for this? -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/22ce1aa8-d57c-4daf-8bcb-19f79bdc387fn%40googlegroups.com.
