I give this skin my recommendation for live data from your MQTT data. https://github.com/Daveiano/weewx-wdc
On Friday, March 31, 2023 at 5:45:30 AM UTC-4 [email protected] wrote: > A common solution ist to install weewx-mqtt, configure it to publish MQTT > messages on new loop packets. > https://github.com/matthewwall/weewx-mqtt > > So this isn't exactly realtime data (depending on the station model), but > probably the closest you get, with using existing solutions. > > There are some skins (Belchertown, Bootstrap, ...) with live weather feed, > if you are searching for an out-of-the-box solution. > https://github.com/weewx/weewx/wiki#skins > > Vince Skahan schrieb am Donnerstag, 30. März 2023 um 03:53:20 UTC+2: > >> Belchertown with the websockets enabled can get pretty close.... >> >> On Wednesday, March 29, 2023 at 5:32:18 PM UTC-7 Joel Bion wrote: >> >>> Is it possible, using Python in Weewx, to obtain the real-time reading >>> from the weather station? >>> >>> What I want to do is, for someone pulling up my station’s page, show the >>> wind speed, rain rate, temp etc, AT THAT MOMENT - vs. from a snapshot taken >>> at the last every-five-minute report generation moment. >>> >>> Is that possible? Obviously, the type of station may matter here. If a >>> station only sends a packet of info every five minutes, there’s no finer >>> granularity than that. >>> >>> Thanks! >>> Joel >> >> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/26df5cb0-39d2-4376-b68e-9c03c5dc2615n%40googlegroups.com.
