Hard to say without seeing the log.

I'm sure your laptop is plenty fast enough.

-tk

On Mon, Aug 1, 2016 at 10:01 AM, Dawei Zhang <dna...@gmail.com> wrote:

> I am using T440s Ubuntu 14.04 and Davis vintage pro2
>
> T440s:
> Processor / Chipset
> CPUIntel Core i7 (4th Gen) 4600U / 2.1 GHz
> Max Turbo Speed3.3 GHz
> Number of CoresDual-Core
> Cache4 MB
> 64-bit ComputingYes
> Platform TechnologyIntel vPro Technology
> FeaturesHyper-Threading Technology, integrated memory controller, Intel
> Turbo Boost Technology 2.0
> Memory
> RAM8 GB ( 1 x 4 GB + 4 GB (soldered) )
> Max RAM Supported12 GB
> TechnologyDDR3L SDRAM
> Speed1600 MHz / PC3-12800
> Form FactorSO DIMM 204-pin
> Slots Qty1
> Empty Slots0
> Storage
> Main Storage256 GB SSD - eDrive
> InterfaceSerial ATA-600
>
> Here is an error I got while querying the weather station 'wee_device
> --info' every 30s:
>
> Error 1:
>
> Using configuration file /etc/weewx/weewx.conf
> Using Vantage driver version 3.0.7 (weewx.drivers.vantage)
> Traceback (most recent call last):
>   File "/usr/bin/wee_device", line 54, in <module>
>     main()
>   File "/usr/bin/wee_device", line 51, in main
>     device.configure(config_dict)
>   File "/usr/share/weewx/weewx/drivers/__init__.py", line 69, in configure
>     self.do_options(options, parser, config_dict, prompt)
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1828, in
> do_options
>     station = Vantage(**config_dict[DRIVER_NAME])
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 472, in __init__
>     self._setup()
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1170, in _setup
>     self.altitude          = self._getEEPROM_value(0x0F, "<h")[0]
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1250, in
> _getEEPROM_value
>     raise weewx.RetriesExceeded("While getting EEPROM data value at
> address 0x%X" % offset)
> weewx.RetriesExceeded: While getting EEPROM data value at address 0xF
>
>
> Error 2:
> Using Vantage driver version 3.0.7 (weewx.drivers.vantage)
> Querying...
> Davis Vantage EEPROM settings:
>
>     CONSOLE TYPE:                   VantagePro2
>
>     CONSOLE FIRMWARE:
>       Date:                         Dec 11 2012
>       Version:                      3.12
>
>     CONSOLE SETTINGS:
>       Archive interval:             60 (seconds)
>       Altitude:                     1300 (foot)
>       Wind cup type:                large
>       Rain bucket type:             0.1 MM
>       Rain year start:              3
>       Onboard time:                 2016-08-01 10:59:04
>
>     CONSOLE DISPLAY UNITS:
>       Barometer:                    inHg
>       Temperature:                  degree_F
>       Rain:                         inch
>       Wind:                         mile_per_hour
>
>     CONSOLE STATION INFO:
>       Latitude (onboard):           +41.4
>       Longitude (onboard):          -93.3
>       Use manual or auto DST?       AUTO
>       DST setting:                  N/A
>       Use GMT offset or zone code?  ZONE_CODE
>       Time zone code:               6
>       GMT offset:                   N/A
>
> Traceback (most recent call last):
>   File "/usr/bin/wee_device", line 54, in <module>
>     main()
>   File "/usr/bin/wee_device", line 51, in main
>     device.configure(config_dict)
>   File "/usr/share/weewx/weewx/drivers/__init__.py", line 69, in configure
>     self.do_options(options, parser, config_dict, prompt)
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1830, in
> do_options
>     self.show_info(station)
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1986, in show_info
>     calibration_dict = station.getStnCalibration()
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1083, in
> getStnCalibration
>     wind) = self._getEEPROM_value(0x32, "<27bh")
>   File "/usr/share/weewx/weewx/drivers/vantage.py", line 1250, in
> _getEEPROM_value
>     raise weewx.RetriesExceeded("While getting EEPROM data value at
> address 0x%X" % offset)
> weewx.RetriesExceeded: While getting EEPROM data value at address 0x32
>
> Is it because my laptop is not fast enough to process the request?
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to