On Monday, August 8, 2016 at 11:43:25 AM UTC-4, Joep L. Blom wrote: > > matthew, > Continuing... Weewxd from the commandline works OK, all data are read. > the deamon weewx, however won't start.
if you get one behavior when you run weewxd directly but a different behavior when you run weewxd as a daemon, then the problem is in your daemon and/or operating system configuration. > I reset the debug switch (storage > is sparse on the PI) but now I have again the gap of approx. 15 minutes > but I haven't found where I can download te923.py version 0.18 or do I > have to download the latest version but that is of March this year and > is yhe one I use. > slow down, tiger. changing the value of debug should not affect the driver behavior. if it does, there is a bug somewhere. if you are experiencing a 15 minute gap then you are not using the latest driver, or even 0.18rc5 the latest driver is version 0.18 and is in the weewx repository at github: https://github.com/weewx/weewx/blob/master/bin/weewx/drivers/te923.py as of 16:55 UTC on 08aug2016, the driver version is 0.18 (and has been for 17 days). using anything other than 0.18 is a waste of your time and my time (unless a different version proves a regression in 0.18). m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
