On Monday, August 29, 2016 at 6:33:55 PM UTC-4, Andy wrote:
>
>
> root@chip:/home/weewx# cat /sys/class/thermal/thermal_zone0/temp
> cat: /sys/class/thermal/thermal_zone0/temp: Invalid argument
>
>
well there is the problem. there is something of with the temp file.
try the attached cmon-0.14rc1.py
it has additional protection against failures when reading the /sys and
/proc files
it will not fix the problem with your temp file, but it will prevent that
from causing the other cmon monitors to fail
m
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
# $Id: cmon.py 1547 2016-08-30 00:00:54Z mwall $
# Copyright 2013 Matthew Wall
"""weewx module that records cpu, memory, disk, and network usage.
This file contains both a weewx driver and a weewx service.
Installation
Put this file in the bin/user directory.
Service Configuration
Add the following to weewx.conf:
[ComputerMonitor]
data_binding = cmon_binding
max_age = 2592000 # 30 days; None to store indefinitely
[DataBindings]
[[cmon_binding]]
database = cmon_sqlite
manager = weewx.manager.DaySummaryManager
table_name = archive
schema = user.cmon.schema
[Databases]
[[cmon_sqlite]]
root = %(WEEWX_ROOT)s
database_name = archive/cmon.sdb
driver = weedb.sqlite
[Engine]
[[Services]]
archive_services = ..., user.cmon.ComputerMonitor
Driver Configuration
Add the following to weewx.conf:
[Station]
station_type = ComputerMonitor
[ComputerMonitor]
polling_interval = 30
driver = user.cmon
Schema
The default schema is defined in this file. If you prefer to maintain a schema
different than the default, specify the desired schema in the configuration.
For example, this would be a schema that stores only memory and network data,
and uses eth1 instead of the default eth0:
[DataBindings]
[[cmon_binding]]
database = cmon_sqlite
manager = weewx.manager.DaySummaryManager
table_name = archive
[[[schema]]]
dateTime = INTEGER NOT NULL PRIMARY KEY
usUnits = INTEGER NOT NULL
interval = INTEGER NOT NULL
mem_total = INTEGER
mem_free = INTEGER
mem_used = INTEGER
swap_total = INTEGER
swap_free = INTEGER
swap_used = INTEGER
net_eth1_rbytes = INTEGER
net_eth1_rpackets = INTEGER
net_eth1_rerrs = INTEGER
net_eth1_rdrop = INTEGER
net_eth1_tbytes = INTEGER
net_eth1_tpackets = INTEGER
net_eth1_terrs = INTEGER
net_eth1_tdrop = INTEGER
Another approach to maintaining a custom schema is to define the schema in the
file user/extensions.py as cmonSchema:
cmonSchema = [
('dateTime', 'INTEGER NOT NULL PRIMARY KEY'),
('usUnits', 'INTEGER NOT NULL'),
('interval', 'INTEGER NOT NULL'),
('mem_total','INTEGER'),
('mem_free','INTEGER'),
('mem_used','INTEGER'),
('net_eth1_rbytes','INTEGER'),
('net_eth1_rpackets','INTEGER'),
('net_eth1_rerrs','INTEGER'),
('net_eth1_rdrop','INTEGER'),
('net_eth1_tbytes','INTEGER'),
('net_eth1_tpackets','INTEGER'),
('net_eth1_terrs','INTEGER'),
('net_eth1_tdrop','INTEGER'),
]
then load it using this configuration:
[DataBindings]
[[cmon_binding]]
database = cmon_sqlite
manager = weewx.manager.DaySummaryManager
table_name = archive
schema = user.extensions.cmonSchema
"""
# FIXME: make these methods platform-independent instead of linux-specific
# FIXME: deal with MB/GB in memory sizes
# FIXME: save the counts or save the differences? for now the differences
from __future__ import with_statement
import os
import platform
import re
import syslog
import time
from subprocess import Popen, PIPE
import weewx
import weeutil.weeutil
from weewx.drivers import AbstractDevice
from weewx.engine import StdService
DRIVER_NAME = "ComputerMonitor"
DRIVER_VERSION = "0.14rc1"
if weewx.__version__ < "3":
raise weewx.UnsupportedFeature("weewx 3 is required, found %s" %
weewx.__version__)
schema = [
('dateTime', 'INTEGER NOT NULL PRIMARY KEY'),
('usUnits', 'INTEGER NOT NULL'),
('interval', 'INTEGER NOT NULL'),
('mem_total', 'INTEGER'),
('mem_free', 'INTEGER'),
('mem_used', 'INTEGER'),
('swap_total', 'INTEGER'),
('swap_free', 'INTEGER'),
('swap_used', 'INTEGER'),
('cpu_user', 'INTEGER'),
('cpu_nice', 'INTEGER'),
('cpu_system', 'INTEGER'),
('cpu_idle', 'INTEGER'),
('cpu_iowait', 'INTEGER'),
('cpu_irq', 'INTEGER'),
('cpu_softirq', 'INTEGER'),
('load1', 'REAL'),
('load5', 'REAL'),
('load15', 'REAL'),
('proc_active', 'INTEGER'),
('proc_total', 'INTEGER'),
# measure cpu temperature (not all platforms support this)
('cpu_temp', 'REAL'), # degree C
('cpu_temp1', 'REAL'), # degree C
('cpu_temp2', 'REAL'), # degree C
('cpu_temp3', 'REAL'), # degree C
('cpu_temp4', 'REAL'), # degree C
# measure rpi attributes (not all platforms support this)
# ('core_temp','REAL'), # degree C
# ('core_volt', 'REAL'),
# ('core_sdram_c', 'REAL'),
# ('core_sdram_i', 'REAL'),
# ('core_sdram_p', 'REAL'),
# ('arm_mem', 'REAL'),
# ('gpu_mem', 'REAL'),
# the default interface on most linux systems is eth0
('net_eth0_rbytes', 'INTEGER'),
('net_eth0_rpackets', 'INTEGER'),
('net_eth0_rerrs', 'INTEGER'),
('net_eth0_rdrop', 'INTEGER'),
('net_eth0_tbytes', 'INTEGER'),
('net_eth0_tpackets', 'INTEGER'),
('net_eth0_terrs', 'INTEGER'),
('net_eth0_tdrop', 'INTEGER'),
# ('net_eth1_rbytes', 'INTEGER'),
# ('net_eth1_rpackets', 'INTEGER'),
# ('net_eth1_rerrs', 'INTEGER'),
# ('net_eth1_rdrop', 'INTEGER'),
# ('net_eth1_tbytes', 'INTEGER'),
# ('net_eth1_tpackets', 'INTEGER'),
# ('net_eth1_terrs', 'INTEGER'),
# ('net_eth1_tdrop', 'INTEGER'),
# some systems have a wireless interface as wlan0
('net_wlan0_rbytes', 'INTEGER'),
('net_wlan0_rpackets', 'INTEGER'),
('net_wlan0_rerrs', 'INTEGER'),
('net_wlan0_rdrop', 'INTEGER'),
('net_wlan0_tbytes', 'INTEGER'),
('net_wlan0_tpackets', 'INTEGER'),
('net_wlan0_terrs', 'INTEGER'),
('net_wlan0_tdrop', 'INTEGER'),
# if the computer is an openvpn server, track the tunnel traffic
# ('net_tun0_rbytes', 'INTEGER'),
# ('net_tun0_rpackets', 'INTEGER'),
# ('net_tun0_rerrs', 'INTEGER'),
# ('net_tun0_rdrop', 'INTEGER'),
# ('net_tun0_tbytes', 'INTEGER'),
# ('net_tun0_tpackets', 'INTEGER'),
# ('net_tun0_terrs', 'INTEGER'),
# ('net_tun0_tdrop', 'INTEGER'),
# disk volumes will vary, but root is always present
('disk_root_total', 'INTEGER'),
('disk_root_free', 'INTEGER'),
('disk_root_used', 'INTEGER'),
# separate partition for home is not uncommon
('disk_home_total', 'INTEGER'),
('disk_home_free', 'INTEGER'),
('disk_home_used', 'INTEGER'),
# measure the ups parameters if we can
('ups_temp', 'REAL'), # degree C
('ups_load', 'REAL'), # percent
('ups_charge', 'REAL'), # percent
('ups_voltage', 'REAL'), # volt
('ups_time', 'REAL'), # seconds
]
# this exension will scan for all mounted file system. these are the
# filesystems we ignore.
IGNORED_MOUNTS = [
'/lib/init/rw',
'/proc',
'/sys',
'/dev',
'/afs',
'/mit',
'/run',
'/var/lib/nfs',
]
def logmsg(level, msg):
syslog.syslog(level, 'cmon: %s' % msg)
def logdbg(msg):
logmsg(syslog.LOG_DEBUG, msg)
def loginf(msg):
logmsg(syslog.LOG_INFO, msg)
def logerr(msg):
logmsg(syslog.LOG_ERR, msg)
def get_collector(hardware=[], ignored_mounts=IGNORED_MOUNTS):
# see what we are running on
s = platform.system()
if s == 'Linux':
return LinuxCollector(hardware, ignored_mounts)
elif s == 'Darwin':
return MacOSXCollector(hardware, ignored_mounts)
elif s == 'BSD':
return BSDCollector(hardware, ignored_mounts)
raise Exception('unsupported system %s' % s)
class Collector(object):
def __init__(self, hardware):
self.hardware = hardware
def get_data(self, now_ts=None):
if now_ts is None:
now_ts = int(time.time() + 0.5)
record = dict()
record['dateTime'] = now_ts
record['usUnits'] = weewx.METRIC
if 'rpi' in self.hardware:
record.update(self._get_rpi_info())
if 'apcups' in self.hardware:
record.update(self._get_apcups_info())
return record
_DIGITS = re.compile('[\d.]+')
@staticmethod
def _get_apcups_info():
record = dict()
try:
cmd = '/sbin/apcaccess'
p = Popen(cmd, shell=True, stdout=PIPE)
o = p.communicate()[0]
for line in o.split('\n'):
if line.startswith('ITEMP'):
m = Collector._DIGITS.search(line)
if m:
record['ups_temp'] = float(m.group())
elif line.startswith('LOADPCT'):
m = Collector._DIGITS.search(line)
if m:
record['ups_load'] = float(m.group())
elif line.startswith('BCHARGE'):
m = Collector._DIGITS.search(line)
if m:
record['ups_charge'] = float(m.group())
elif line.startswith('OUTPUTV') or line.startswith('BATTV'):
m = Collector._DIGITS.search(line)
if m:
record['ups_voltage'] = float(m.group())
elif line.startswith('TIMELEFT'):
m = Collector._DIGITS.search(line)
if m:
record['ups_time'] = float(m.group())
except (ValueError, IOError, KeyError), e:
logerr('apcups_info failed: %s' % e)
return record
_RPI_VCGENCMD = '/opt/vc/bin/vcgencmd'
_RPI_VOLT = re.compile('([^:]+):\s+volt=([\d.]+)')
_RPI_MEM = re.compile('([^=]+)=([\d]+)')
@staticmethod
def _get_rpi_info():
# get raspberry pi measurements
record = dict()
try:
cmd = '%s measure_temp' % Collector._RPI_VCGENCMD
p = Popen(cmd, shell=True, stdout=PIPE)
o = p.communicate()[0]
record['core_temp'] = float(o.replace("'C\n",'').partition('=')[2])
cmd = '%s measure_volts' % Collector._RPI_VCGENCMD
p = Popen(cmd, shell=True, stdout=PIPE)
o = p.communicate()[0]
for line in o.split('\n'):
m = Collector._RPI_VOLT.search(line)
if m:
record[m.group(1) + '_volt'] = float(m.group(2))
cmd = '%s measure_volts' % Collector._RPI_VCGENCMD
p = Popen(cmd, shell=True, stdout=PIPE)
o = p.communicate()[0]
for line in o.split('\n'):
m = Collector._RPI_MEM.search(line)
if m:
record[m.group(1) + '_mem'] = float(m.group(2))
except (ValueError, IOError, KeyError), e:
logerr('rpi_info failed: %s' % e)
return record
# this should work on any linux running kernel 2.2 or later
class LinuxCollector(Collector):
def __init__(self, hardware, ignored_mounts):
super(LinuxCollector, self).__init__(hardware)
# provide info about the system on which we are running
loginf('sysinfo: %s' % ' '.join(os.uname()))
fn = '/proc/cpuinfo'
try:
cpuinfo = self._readproc_dict(fn)
for key in cpuinfo:
loginf('cpuinfo: %s: %s' % (key, cpuinfo[key]))
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
self.ignored_mounts = ignored_mounts
self.last_cpu = dict()
self.last_net = dict()
@staticmethod
def _readproc_line(filename):
"""read single line proc file, return the string"""
info = ''
with open(filename) as fp:
info = fp.readline().strip()
return info
@staticmethod
def _readproc_lines(filename):
"""read proc file that has 'name value' format for each line"""
info = dict()
with open(filename) as fp:
for line in fp:
line = line.replace(' ', ' ')
(label, data) = line.split(' ', 1)
info[label] = data
return info
@staticmethod
def _readproc_dict(filename):
"""read proc file that has 'name:value' format for each line"""
info = dict()
with open(filename) as fp:
for line in fp:
if line.find(':') >= 0:
(n, v) = line.split(':', 1)
info[n.strip()] = v.strip()
return info
_CPU_KEYS = ['user','nice','system','idle','iowait','irq','softirq']
# bytes received
# packets received
# packets dropped
# fifo buffer errors
# packet framing errors
# compressed packets
# multicast frames
_NET_KEYS = [
'rbytes','rpackets','rerrs','rdrop','rfifo','rframe','rcomp','rmulti',
'tbytes','tpackets','terrs','tdrop','tfifo','tframe','tcomp','tmulti'
]
def get_data(self, now=None):
record = super(LinuxCollector, self).get_data(now)
# read memory status
fn = '/proc/meminfo'
try:
meminfo = self._readproc_dict(fn)
if meminfo:
record['mem_total'] = int(meminfo['MemTotal'].split()[0]) # kB
record['mem_free'] = int(meminfo['MemFree'].split()[0]) # kB
record['mem_used'] = record['mem_total'] - record['mem_free']
record['swap_total'] = int(meminfo['SwapTotal'].split()[0]) # kB
record['swap_free'] = int(meminfo['SwapFree'].split()[0]) # kB
record['swap_used'] = record['swap_total'] - record['swap_free']
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
# get cpu usage
fn = '/proc/stat'
try:
cpuinfo = self._readproc_lines(fn)
if cpuinfo:
values = cpuinfo['cpu'].split()[0:7]
for i,key in enumerate(self._CPU_KEYS):
if self.last_cpu.has_key(key):
record['cpu_'+key] = int(values[i]) - self.last_cpu[key]
self.last_cpu[key] = int(values[i])
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
# get network usage
fn = '/proc/net/dev'
try:
netinfo = self._readproc_dict(fn)
if netinfo:
for iface in netinfo:
values = netinfo[iface].split()
for i, key in enumerate(self._NET_KEYS):
if not self.last_net.has_key(iface):
self.last_net[iface] = {}
if self.last_net[iface].has_key(key):
record['net_'+iface+'_'+key] = int(values[i]) - self.last_net[iface][key]
if record['net_'+iface+'_'+key] < 0:
maxcnt = 0x100000000 # 32-bit counter
if record['net_'+iface+'_'+key] + maxcnt < 0:
maxcnt = 0x10000000000000000 # 64-bit counter
record['net_'+iface+'_'+key] += maxcnt
self.last_net[iface][key] = int(values[i])
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
# uptimestr = _readproc_line('/proc/uptime')
# (uptime,idletime) = uptimestr.split()
# get load and process information
fn = '/proc/loadavg'
try:
loadstr = self._readproc_line(fn)
if loadstr:
(load1,load5,load15,nproc) = loadstr.split()[0:4]
record['load1'] = float(load1)
record['load5'] = float(load5)
record['load15'] = float(load15)
(num_proc,tot_proc) = nproc.split('/')
record['proc_active'] = int(num_proc)
record['proc_total'] = int(tot_proc)
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
# read cpu temperature
tdir = '/sys/class/hwmon/hwmon0/device'
# rpi keeps cpu temperature in a different location
tfile = '/sys/class/thermal/thermal_zone0/temp'
if os.path.exists(tdir):
try:
for f in os.listdir(tdir):
if f.endswith('_input'):
s = self._readproc_line(os.path.join(tdir,f))
if s and len(s):
n = f.replace('_input','')
tC = int(s) / 1000 # degree C
tF = 32.0 + tC * 9.0 / 5.0
record['cpu_' + n] = tC
except Exception, e:
logdbg("read failed for %s: %s" % (tdir, e))
elif os.path.exists(tfile):
try:
s = self._readproc_line(tfile)
tC = int(s) / 1000 # degree C
record['cpu_temp'] = tC
except Exception, e:
logdbg("read failed for %s: %s" % (tfile, e))
# get stats on mounted filesystems
fn = '/proc/mounts'
disks = []
try:
mntlines = self._readproc_lines(fn)
if mntlines:
for mnt in mntlines:
mntpt = mntlines[mnt].split()[0]
ignore = False
if mnt.find(':') >= 0:
ignore = True
for m in self.ignored_mounts:
if mntpt.startswith(m):
ignore = True
break
if not ignore:
disks.append(mntpt)
except Exception, e:
logdbg("read failed for %s: %s" % (fn, e))
for disk in disks:
label = disk.replace('/', '_')
if label == '_':
label = '_root'
st = os.statvfs(disk)
free = int((st.f_bavail * st.f_frsize) / 1024) # kB
total = int((st.f_blocks * st.f_frsize) / 1024) # kB
used = int(((st.f_blocks - st.f_bfree) * st.f_frsize) / 1024) # kB
record['disk' + label + '_free'] = free
record['disk' + label + '_total'] = total
record['disk' + label + '_used'] = used
return record
def loader(config_dict, engine):
return ComputerMonitorDriver(**config_dict['ComputerMonitor'])
class ComputerMonitorDriver(AbstractDevice):
"""Driver for collecting computer health data."""
def __init__(self, **stn_dict):
loginf('driver version is %s' % DRIVER_VERSION)
self.polling_interval = int(stn_dict.get('polling_interval', 10))
loginf('polling interval is %s' % self.polling_interval)
self.ignored_mounts = stn_dict.get('ignored_mounts', IGNORED_MOUNTS)
self.hardware = stn_dict.get('hardware', [None])
if not isinstance(self.hardware, list):
self.hardware = [self.hardware]
self.collector = get_collector(self.hardware, self.ignored_mounts)
@property
def hardware_name(self):
return 'ComputerMonitor'
def genLoopPackets(self):
while True:
p = self.collector.get_data()
yield p
time.sleep(self.polling_interval)
class ComputerMonitor(StdService):
"""Collect CPU, Memory, Disk, and other computer information."""
def __init__(self, engine, config_dict):
super(ComputerMonitor, self).__init__(engine, config_dict)
loginf("service version is %s" % DRIVER_VERSION)
d = config_dict.get('ComputerMonitor', {})
self.max_age = weeutil.weeutil.to_int(d.get('max_age', 2592000))
self.ignored_mounts = d.get('ignored_mounts', IGNORED_MOUNTS)
self.hardware = d.get('hardware', [None])
if not isinstance(self.hardware, list):
self.hardware = [self.hardware]
# get the database parameters we need to function
binding = d.get('data_binding', 'cmon_binding')
self.dbm = self.engine.db_binder.get_manager(data_binding=binding,
initialize=True)
# be sure schema in database matches the schema we have
dbcol = self.dbm.connection.columnsOf(self.dbm.table_name)
dbm_dict = weewx.manager.get_manager_dict(
config_dict['DataBindings'], config_dict['Databases'], binding)
memcol = [x[0] for x in dbm_dict['schema']]
if dbcol != memcol:
raise Exception('cmon schema mismatch: %s != %s' % (dbcol, memcol))
self.last_ts = None
self.collector = get_collector(self.hardware, self.ignored_mounts)
self.bind(weewx.NEW_ARCHIVE_RECORD, self.new_archive_record)
def shutDown(self):
try:
self.dbm.close()
except:
pass
def new_archive_record(self, event):
"""save data to database then prune old records as needed"""
now = int(time.time() + 0.5)
delta = now - event.record['dateTime']
if delta > event.record['interval'] * 60:
logdbg("Skipping record: time difference %s too big" % delta)
return
if self.last_ts is not None:
self.save_data(self.get_data(now, self.last_ts))
self.last_ts = now
if self.max_age is not None:
self.prune_data(now - self.max_age)
def save_data(self, record):
"""save data to database"""
self.dbm.addRecord(record)
def prune_data(self, ts):
"""delete records with dateTime older than ts"""
sql = "delete from %s where dateTime < %d" % (self.dbm.table_name, ts)
self.dbm.getSql(sql)
try:
# sqlite databases need some help to stay small
self.dbm.getSql('vacuum')
except Exception, e:
pass
def get_data(self, now_ts, last_ts):
record = self.collector.get_data(now_ts)
record['interval'] = int((now_ts - last_ts) / 60)
return record
# To test this extension, do the following:
#
# cd /home/weewx
# PYTHONPATH=bin python bin/user/cmon.py
#
if __name__=="__main__":
usage = """%prog [options] [--help] [--debug]"""
def main():
import optparse
import weecfg
syslog.openlog('wee_cmon', syslog.LOG_PID | syslog.LOG_CONS)
parser = optparse.OptionParser(usage=usage)
parser.add_option('--config', dest='cfgfn', type=str, metavar="FILE",
help="Use configuration file FILE. Default is /etc/weewx/weewx.conf or /home/weewx/weewx.conf")
parser.add_option('--binding', dest="binding", metavar="BINDING",
default='cmon_binding',
help="The data binding to use. Default is 'cmon_binding'.")
parser.add_option('--test-collector', dest='tc', action='store_true',
help='test the data collector')
parser.add_option('--test-driver', dest='td', action='store_true',
help='test the driver')
parser.add_option('--test-service', dest='ts', action='store_true',
help='test the service')
parser.add_option('--update', dest='update', action='store_true',
help='update schema to v3')
(options, args) = parser.parse_args()
if options.update:
_, config_dict = weecfg.read_config(options.cfgfn, args)
update_to_v3(config_dict, options.binding)
elif options.tc:
test_collector()
elif options.td:
test_driver()
elif options.ts:
test_service()
def update_to_v3(config_dict, db_binding):
import weedb
import sqlite3
from weewx.manager import Manager
# update an old schema to v3-compatible. this means adding the
# interval column and populating it.
mgr_dict = weewx.manager.get_manager_dict(config_dict['DataBindings'],
config_dict['Databases'],
db_binding)
# see if update is actually required
schema_name = mgr_dict.get('schema')
if schema_name is None:
s = schema
elif isinstance(schema_name, str):
s = weeutil.weeutil._get_object(schema_name)
else:
s = mgr_dict['schema']
if 'interval' in s:
print "Column 'interval' already exists, update not necessary"
return
# make a copy of the database dict
new_db_dict = dict(mgr_dict['database_dict'])
# modify the database name
new_db_dict['database_name'] = mgr_dict['database_dict']['database_name'] + '_new'
# see if the new db exists. if so, see if we can delete it
try:
weedb.create(new_db_dict)
except weedb.DatabaseExists:
ans = None
while ans not in ['y', 'n']:
ans = raw_input("New database '%s' already exists. Delete it (y/n)? " % (new_db_dict['database_name'],))
if ans == 'y':
weedb.drop(new_db_dict)
elif ans == 'n':
print "update aborted"
return
except sqlite3.OperationalError:
pass
# see if we really should do this
ans = None
while ans not in ['y', 'n']:
ans = raw_input("Create new database %s (y/n)? " % new_db_dict['database_name'])
if ans == 'y':
break
elif ans == 'n':
print "update aborted"
return
# copy the data over
cnt = 0
with Manager.open(mgr_dict['database_dict']) as old_mgr:
with Manager.open_with_create(new_db_dict, schema=s) as new_mgr:
last_ts = None
for r in old_mgr.genBatchRecords():
cnt += 1
print "record %d\r" % cnt,
ival = r['dateTime'] - last_ts if last_ts else 0
r['interval'] = ival
new_mgr.addRecord(r)
last_ts = r['dateTime']
print "copied %d records\n" % cnt
def test_collector():
c = get_collector()
while True:
print c.get_data()
time.sleep(5)
def test_driver():
driver = ComputerMonitorDriver()
for p in driver.genLoopPackets():
print p
def test_service():
from weewx.engine import StdEngine
config = {
'Station': {
'station_type': 'Simulator',
'altitude': [0, 'foot'],
'latitude': 0,
'longitude': 0},
'Simulator': {
'driver': 'weewx.drivers.simulator',
'mode': 'simulator'},
'ComputerMonitor': {
'binding': 'cmon_binding'},
'DataBindings': {
'cmon_binding': {
'database': 'cmon_sqlite',
'manager': 'weewx.manager.DaySummaryManager',
'table_name': 'archive',
'schema': 'user.cmon.schema'}},
'Databases': {
'cmon_sqlite': {
'root': '%(WEEWX_ROOT)s',
'database_name': '/tmp/cmon.sdb',
'driver': 'weedb.sqlite'}},
'Engine': {
'Services': {
'archive_services': 'user.cmon.ComputerMonitor'}}}
engine = StdEngine(config)
svc = ComputerMonitor(engine, config)
now_ts = int(time.time() + 0.5)
last_ts = None
for _ in range(4):
if last_ts is not None:
record = svc.get_data(now_ts, last_ts)
print record
last_ts = now_ts
time.sleep(5)
os.remove('/tmp/cmon.sdb')
main()
