Hi,
I have installed Weewx 3.5.0 with last Driver Klimalogg.
When i try to reconfigure with Klimalogg driver the configuration
processing crash at thend with the following message:
Specify the frequency used between the station and the
transceiver, either 'US' (915 MHz) or 'EU' (868.3 MHz).
frequency [EU]:
Using kl_binding in StdReport
Using kl_binding in StdArchive
Traceback (most recent call last):
File "./wee_config", line 115, in <module>
main()
File "./wee_config", line 110, in main
config_mgr.run(args, options)
File "/usr/local/share/weewx/bin/weecfg/config.py", line 102, in run
self.modify_config(config_dict, options)
File "/usr/local/share/weewx/bin/weecfg/config.py", line 122, in
modify_config
weecfg.modify_config(config_dict, stn_info, self.logger, options.debug)
File "/usr/local/share/weewx/bin/weecfg/__init__.py", line 339, in
modify_config
config_dict['StdReport']['StandardReport'].update({
File "/usr/lib/python2.7/site-packages/configobj.py", line 554, in
__getitem__
val = dict.__getitem__(self, key)
KeyError: 'StandardReport'
Config file in attachment, thnaks for you support.
Regards,
Yannick
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /usr/local/share/weewx
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.5.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Bretigny sur Orge, France"
# Latitude and longitude in decimal degrees
latitude = 48.6061389
longitude = 2.3028888888888885
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 70, meter # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = KlimaLogg
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = ../../../../volume1/web/weewx
# The database binding indicates which data should be used in reports.
data_binding = kl_binding
# Each of the following subsections defines a report that will be run.
[[kl]]
HTML_ROOT = ../../../../volume1/web/weewx
skin = kl
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for a secure FTP (SFTP) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
# Derived quantities are calculated by this service. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# How long to wait (in seconds) before processing new archive data. Must
# be greater than zero.
archive_delay = 15
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = kl_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
[[kl_binding]]
manager = weewx.wxmanager.WXDaySummaryManager
database = archive_sqlite
table_name = archive
schema = user.kl.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[KlimaLogg]
# This section is for the TFA KlimaLogg series of weather stations.
# Radio frequency to use between USB transceiver and console: US or EU
# US uses 915 MHz, EU uses 868.3 MHz. Default is EU.
transceiver_frequency = EU
# The station model, e.g., 'TFA KlimaLoggPro' or 'TFA KlimaLogg'
model = TFA KlimaLogg
# The driver to use:
driver = user.kl
# debug flags:
# 0=no logging; 1=minimum logging; 2=normal logging; 3=detailed logging
# Don't forget to set debug flags to 0 when finished testing!
debug_comm = 0
debug_config_data = 1
debug_weather_data = 1
debug_history_data = 1
debug_dump_format = auto
# The serial number will be used to choose the right Weather Display
Transceiver when more than one is present.
# TIP: when the serial number of a transceiver is not known yet, remove
temporary the other transceiver from
# your server and start the driver without the serial number setting; the
serial number and devid will be
# presented in the debug logging.
# USB transceiver Kat.Nr.: 30.3175 05/2014
# serial = 010128031400117 # devid = 0x0075
# logger_channel = 1
# polling_interval = 10
# comm_interval = 8
# The catchup mechanism will catchup history records to a maximum of
limit_rec_read_to [0 .. 51200]
# limit_rec_read_to = 300 #range [0..51200]
# Sensor texts can have 1-10 upper-case alphanumeric characters;
# other allowed characters: space - + ( ) * , . / \ and o (o = lower case
O used as degree symbol)
# Note: You can't preset sensor texts for non-present sensors
# Example preset of sensor texts:
sensor_text1 = "CH LAURA"
sensor_text2 = "OUTSIDE"
# sensor_text3 = "7131 FRID"
# sensor_text4 = "52F4 KID1"
# sensor_text5 = "67D7 BATH"
# sensor_text6 = "3731 KID2"
# sensor_text7 = "76F4 STUD"
# sensor_text8 = "25D7 GARA"
# Preset sensor_map_id
sensor_map_id = 0 # 0 = KL_SENSOR_MAP, 1 = WVIEW_SENSOR_MAP
