Gone back into weewx.conf and set the sensor for temp to 4. Stopped and started weewx and now I'm getting a temperature reading :-)
On Monday, 12 September 2016 16:42:16 UTC+1, Andy Harrold wrote: > > Showing as CH4 beside the Temperature reading on my Irox Pro X2 - > Temperature is working on the Irox. > > On Monday, 12 September 2016 16:24:36 UTC+1, mwall wrote: >> >> On Monday, September 12, 2016 at 11:14:19 AM UTC-4, Andy Harrold wrote: >>> >>> Tried changing the Sensor numbers for OutHumidity & OutTemp through from >>> 1 to 5 to see if any readings for temp appeared, but unfortunately no. >> >> >> andy, >> >> what is the channel number of the remote sensor (look at the position of >> the switch inside the sensor)? >> >> does your console see your remote t/h sensor? >> >> if so, what is the channel number that the console reports for the sensor? >> >> if not, then you need to make the console see the sensor - press and hold >> the DOWN button to force the console to find all of the remote sensors. >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
