After a lot of trial and error I've managed to replicate the calls WeatherSmart makes to the device and can pull data, at least in .NET. My Python is somewhat rusty so porting this into WeeWx might be a challenge, if anyone is interested I can supply the information and be a guinea pig.
On Monday, 19 September 2016 10:53:30 UTC+1, Lloyd Kinsella wrote: > > Does WeeWX support the FO WH2310 yet or has anyone done any work in this > area? > > There was some discussion here around a rebranded Tycon variant - > https://groups.google.com/d/topic/weewx-user/MlkTnmbDLOc/discussion > > I recently purchased one (under the Excelvan moniker) and I'm trying to > access it via USB, I've started playing with the Windows library included > in the above topic and managed to dump the EEPROM but my problem with this > is it ties me to Windows I'd much rather run everything over my Pi with the > base station attached to it. > > I'd be interesting in figuring out what commands to send to the device to > replicate what the DLL is currently doing with a hope of porting it to use > libusb or similar under Linux. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
