1. Bad reception is quite common with FO stations
2. Try with the console vertical against a wall - and make sure that the
outdoor sender is exactly vertical also
3. Does it make a difference if the window is open?
4. If the station is trying to get the time from the time signal I believe
that the console does not receive data - and this can take 2 hrs for the
time signal to be obtained I believe.
On Wednesday, 28 September 2016 21:08:05 UTC+3, Vlad Rafeev wrote:
> Log says when disconnects:
>
> weewx[4689]: fousb: station status {'unknown': 0, 'lost_connection': 64,
> 'rain_overflow': 0} (64)ertical also
>
> When connects back:
>
> weewx[4689]: fousb: station status {'unknown': 0, 'lost_connection': 0,
> 'rain_overflow': 0} (0) - когда обратно появляется
>
> On Wednesday, September 28, 2016 at 8:56:03 PM UTC+3, Vlad Rafeev wrote:
>>
>> Hi!
>>
>> I have set up Fine Offset WS1080 weather station with weewx.
>>
>> You can check data here —
>> https://beta.windguru.cz/station/686
>>
>> There are constant gaps in data like this http://take.ms/QeYOo
>>
>> Station is located ~10 meters outside with almost straight visibility
>> through a window. Still results are pretty bad.
>>
>> I have used included USB cable. When I have run test command, it gave
>> following results:
>>
>> $ sudo wee_device --check-usb
>> bad/total: 275/429843
>>
>> When receiver is out of data, display shows only internal temperature
>> (and other internal parameters). External are not showing.
>>
>> Is there any guide to improve receive quality? I want to switch to
>> powered USB hub, does it make any sense? Anything else I should experiment
>> with and look to?
>>
>> Any advice is greatly appreciated.
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
