What is your archive interval?? As I understand the wmr200 it emits partial packets, so if your archive interval is too small it is very likely that no reading for a sensor was received during the archive period. Are you using a different interval now to what you used to use - did you change the interval while you were trying to get the sensors to read perhaps??
Try with an archive interval of 300 seconds and see if it is any better If that fails, stop weewx, set debug = 1, restart and post the log FROM THE RESTART UP TO AT LEAST THE SECOND REPORT GENERATION SEQUENCE On Sunday, 23 October 2016 12:07:36 UTC+3, Ivars Strazdins wrote: > Hi there, > after upgrading from 3.5.0 to 3.6.1 and sorting out the mess with extra > sensors (had to rename extra*2 to extra*1 and extra*3 to extra*2, then > update DB data, too) I see that outdoor sensor data sometimes is not > displayed on webpage. > WMR200 displays outdoor data in console and there are no errors in weewx > log, but the data is often missing in wewx web page ( > http://gimnasti.selfip.org). > Of course, it can be the famous case with car and ice cream ( > https://goo.gl/73Ta) and some other factor has come into play that I have > no idea about, yet maybe you have seen something similar? > Appreciate any insights. Thank you in adcance! > Ivars > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
