can i ask if you are using a new bridge/smarthub or one you updated
the reason is i use a old bridge i upgraded the firmware on when i use the
interceptor 0.15 driver in sniff mode and it dies after some time
and tcpflow put out data that looks like this this could just be how
tcpflow printed the data too
{"localtime":"06:56:13","checkversion":"224"}GET
/weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1GET
/weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1GET
/weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1&id=24C86E01765D&mt=tower&sensor=00009686&humidity=43&tempf=57.9&baromin=28.67&battery=normal&rssi=3
HTTP/1.1
On Sunday, October 30, 2016 at 10:01:59 PM UTC-5, Brad Tucker wrote:
>
> I have setup a bridge running raspberry pi. It is connected as follows:
>
> Acurite Bridge -> RaspberyPi WeeWX Bridge -> Internet Connection
>
> It is passing packets through the bridge. The bridge has been updating
> myaccurite & weather underground for hours and all is well with it.
>
> I am having problems passing the sniffed data to the weewx driver. I have
> picked together what I think is a decent script but its not parsing
> properly.
> sudo tcpdump -A -n -p -l -i eth0 -s0 -w - tcp dst port 80 | stdbuf -oL
> strings -n8
>
> output:
> tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size
> 262144 bytes
> GET
> /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1R
> &id=24C86E06B15C&mt=tower&sensor=00012694R
> &humidity=65&tempf=72.8R
> &baromin=29.35&battery=normal&rssi=3R
> HTTP/1.1
> hubapi.myacurite.com
> User-Agent: Hub/224R
> Connection: close
> GET
> /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1]
> &id=24C86E06B15C&mt=5N1x31&sensor=00002179]
> &windspeedmph=0&winddir=270]
> &rainin=0.00&dailyrainin=0.20&humidity=96&tempf=57.2&dewptf=56]
> &baromin=29.35&battery=normal&rssi=3]
> HTTP/1.1
> hubapi.myacurite.com
> User-Agent: Hub/224]
> Connection: closeGET
> /weatherstation/updateweatherstation.php?ID=KCATHOUS110&PASSWORD=password&dateutc=now&action=updateraw&realtime=1^
> &rtfreq=36^
> &id=24C86E06B15C&mt=5N1x31&sensor=00002179^
> &windspeedmph=0&winddir=270^
> &rainin=0.00&dailyrainin=0.20&humidity=96&tempf=57.2&dewptf=56^
> &baromin=29.35&battery=normal&rssi=3^
> HTTP/1.1
> rtupdate.wunderground.com^
> Connection: close
> GET
> /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1b
> &id=24C86E06B15C&mt=tower&sensor=00008384b
> &humidity=48&tempf=81.4b
> &baromin=29.35&battery=normal&rssi=3b
> HTTP/1.1
> hubapi.myacurite.com
> User-Agent: Hub/224b
> Connection: close
> GET
> /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1c
> &id=24C86E06B15C&mt=tower&sensor=00012694c
> &humidity=65&tempf=72.8c
> &baromin=29.35&battery=normal&rssi=3c
> HTTP/1.1
> hubapi.myacurite.com
> User-Agent: Hub/224c
> Connection: close
> GET
> /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1{
> &id=24C86E06B15C&mt=5N1x38&sensor=00002179{
> &windspeedmph=0&humidity=96{
> &tempf=56.9{
> &baromin=29.35&battery=normal&rssi=3{
> HTTP/1.1
> hubapi.myacurite.com{
> User-Agent: Hub/224{
> Connection: close
>
> when I run the following through netcat like this:
> sudo tcpdump -A -n -p -l -i eth0 -s0 -w - tcp dst port 80 | stdbuf -oL
> strings -n8 | nc 192.168.1.22 8080
> the process only stays alive for seconds and I get this:
> tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size
> 262144 bytes
> 19 packets captured
> 19 packets received by filter
> 0 packets dropped by kernel
>
> and syslog reports this:
> Oct 30 19:58:57 weather weewx[781]: interceptor: MainThread: empty queue
> Oct 30 19:59:07 weather weewx[781]: interceptor: MainThread: empty queue
> Oct 30 19:59:17 weather weewx[781]: interceptor: MainThread: empty queue
> Oct 30 19:59:27 weather weewx[781]: interceptor: MainThread: empty queue
> Oct 30 19:59:37 weather weewx[781]: interceptor: MainThread: empty queue
>
> After spending the better part of a day with this Im out of ideas.
>
> Please Help!
> Brad
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
