I would still like to see the log with record_generation=hardware. -tk
On Mon, Nov 14, 2016 at 7:19 AM, <[email protected]> wrote: > I haven't done another log, but I set the Archive to software and it > immediately began showing date on weather underground. I will be watching > this to see if it can continue contact. If so I will post in a couple of > hours.... Thank you for your help on this. I have another weather station > in New Mexico where I am going to try to switch to a Rpi when I next get > out there. Hopefully you won't hear from me then, other than to to tell > you it is up. > I really appreciate you and your software, > Thanks, > john > > > On Monday, November 14, 2016 at 9:04:12 AM UTC-6, [email protected] > wrote: >> >> While my memory may be bad, that is not the problem I need to fix. This >> setup is not uploading any data, current or archived to the weather >> underground. I don't really care whether or not the logger maintains its >> own data if it is also stored on the internet at wunderground. The Usb >> connection with the datalogger is way overpriced for what it is as is the >> console, so if the archiving doesn't work I likely won't bother to get it >> fixed as long as the data is being uploaded. The Rpi is clearly getting >> the data from the console (I am seeing it in the terminal). The console is >> clearly getting the data from the instrument. The weather underground only >> got data for 10minutes before data stopped being transferred. If I can get >> the data transferred to my wunderground site, I am done. A bandaid will >> be fine. I will try to change the record_generation and do the log again. >> Thanks for your help, >> john >> >> Ok. so this morning I booted the computer. I recleared the memory. >> Started the log. started the weewx. waited 5 minutes. stopped the >> weewx. stopped the log. Uploaded the text file as an attachment. Next I >> will try changing the record_generation to software. Anyway, this log is >> attached. >> >> On Sunday, November 13, 2016 at 11:37:11 PM UTC-6, Tom Keffer wrote: >>> >>> You did not post a new log, so I can't tell if you're still getting the >>> same error. Are you? If you've cleared the logger and you're still getting >>> a bad archive type, then the logger is bad. >>> >>> You may not have noticed it before because your prior system may not >>> have taken advantage of the onboard memory of the logger. You can do the >>> same thing with weewx by changing the option record_generation >>> <http://www.google.com/url?q=http%3A%2F%2Fweewx.com%2Fdocs%2Fusersguide.htm%23StdArchive&sa=D&sntz=1&usg=AFQjCNGmMe-mtiQ61M_DHjpTv7o6ZmVLzw> >>> from 'hardware' to 'software,' but that's putting a bandaid on the problem. >>> >>> -tk >>> >>> On Sun, Nov 13, 2016 at 9:26 PM, <[email protected]> wrote: >>> >>>> >>>> I tried clearing the memory and it makes no difference. I don't think >>>> it is hardware as it has been working for years on a windows system, and >>>> was just taken off 2 days ago to try this. I used wee_device and changed >>>> the interval to 10 and that seemed successful. It is still not uploading >>>> to the weather underground. >>>> >>>> Jon >>>> >>>> >>>> On Sunday, November 13, 2016 at 10:43:34 PM UTC-6, gjr80 wrote: >>>>> >>>>> Hi, >>>>> >>>>> This post >>>>> <https://groups.google.com/d/msg/weewx-user/9BeGjBZj5zE/0ZiqSZJsMIMJ>might >>>>> give you a way ahead. Note though that wee_config_device is now >>>>> wee_device <http://weewx.com/docs/utilities.htm#wee_device_utility> >>>>> (since weewx v3.2.0), the equivalent command is: >>>>> >>>>> wee_device --clear-memory >>>>> >>>>> Also, not a big deal but your weewx.conf is telling your device to >>>>> use an archive interval of 5 minutes but your device is set to use 10 >>>>> minutes. In such cases the device archive period is used, if you really do >>>>> want 5 minutes then you will need to set your device to use 5 minutes >>>>> (again use wee_device but this time with the --set-interval option). >>>>> Note that you need to stop weewx to use wee_device. >>>>> >>>>> Gary >>>>> >>>>> On Monday, 14 November 2016 14:30:39 UTC+10, [email protected] >>>>> wrote: >>>>>> >>>>>> >>>>>> I started the log; ran start; allowed it to send the log to a text >>>>>> file; stopped it after 10 minutes. The log file is attached. >>>>>> Thanks for any help. >>>>>> John >>>>>> >>>>>> On Sunday, November 13, 2016 at 10:20:05 PM UTC-6, >>>>>> [email protected] wrote: >>>>>>> >>>>>>> I am working on it now. Will post in a few minutes. I think the >>>>>>> archive was reset as I disconnected the power and battery and usb to the >>>>>>> weather station after reading a post about resetting it. I think that >>>>>>> got >>>>>>> the archive, though I could be wrong. I am giving it about 10 minutes >>>>>>> to >>>>>>> finish the archiving and will post the text file then. >>>>>>> Thanks, >>>>>>> John >>>>>>> >>>>>>> On Sunday, November 13, 2016 at 8:04:34 PM UTC-6, Tom Keffer wrote: >>>>>>>> >>>>>>>> Please restart weewx and post the log from startup. Also, I don't >>>>>>>> know how long your archive interval is, but let it run at least that >>>>>>>> long. >>>>>>>> >>>>>>>> -tk >>>>>>>> >>>>>>>> On Sun, Nov 13, 2016 at 6:00 PM, <[email protected]> wrote: >>>>>>>> >>>>>>>>> Hi all, >>>>>>>>> I am new to this so I could use some help. I am connecting a >>>>>>>>> vantage vue weather station through a Raspberry pi 2 to the weather >>>>>>>>> underground. I installed the debian install of weewx on the pi a day >>>>>>>>> ago. >>>>>>>>> (current version). The pi can see the weatherstation, and came up >>>>>>>>> and sent >>>>>>>>> data to the weather underground for about 10 minutes last night. >>>>>>>>> >>>>>>>>> Debug=1 is on. >>>>>>>>> here is the syslog >>>>>>>>> >>>>>>>>> pi@raspberrypi ~/Scripts $ ./wx-syslog.sh >>>>>>>>> Nov 13 19:42:24 raspberrypi weewx[2424]: vantage: gentle wake up >>>>>>>>> of console successful >>>>>>>>> Nov 13 19:42:24 raspberrypi weewx[2424]: vantage: Requesting 200 >>>>>>>>> LOOP packets. >>>>>>>>> Nov 13 19:42:24 raspberrypi weewx[2424]: vantage: gentle wake up >>>>>>>>> of console successful >>>>>>>>> Nov 13 19:43:07 raspberrypi kernel: [18416.464275] >>>>>>>>> w1_master_driver w1_bus_master1: Family 0 for 00.de8000000000.67 is >>>>>>>>> not >>>>>>>>> registered. >>>>>>>>> Nov 13 19:43:31 raspberrypi kernel: [18440.725167] >>>>>>>>> w1_master_driver w1_bus_master1: Family 0 for 00.3e8000000000.8e is >>>>>>>>> not >>>>>>>>> registered. >>>>>>>>> Nov 13 19:44:17 raspberrypi kernel: [18487.177578] >>>>>>>>> w1_master_driver w1_bus_master1: Family 0 for 00.be8000000000.02 is >>>>>>>>> not >>>>>>>>> registered. >>>>>>>>> Nov 13 19:44:17 raspberrypi rsyslogd-2007: action 'action 17' >>>>>>>>> suspended, next retry is Sun Nov 13 19:45:47 2016 [try >>>>>>>>> http://www.rsyslog.com/e/2007 ] >>>>>>>>> Nov 13 19:44:54 raspberrypi kernel: [18523.645736] >>>>>>>>> w1_master_driver w1_bus_master1: Family 0 for 00.7e8000000000.c8 is >>>>>>>>> not >>>>>>>>> registered. >>>>>>>>> Nov 13 19:45:42 raspberrypi kernel: [18571.925336] >>>>>>>>> w1_master_driver w1_bus_master1: Family 0 for 00.fe8000000000.44 is >>>>>>>>> not >>>>>>>>> registered. >>>>>>>>> Nov 13 19:45:49 raspberrypi rsyslogd-2007: action 'action 17' >>>>>>>>> suspended, next retry is Sun Nov 13 19:47:19 2016 [try >>>>>>>>> http://www.rsyslog.com/e/2007 ] >>>>>>>>> >>>>>>>>> It will not connect and upload to the weather underground. Not >>>>>>>>> sure about what the w1_master is or how to register it. >>>>>>>>> >>>>>>>>> all help appreciated, >>>>>>>>> Thanks, >>>>>>>>> John >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
