Thanks that did it :D I had it below in the section with "perfer_hardware" etc. Much appreciated
On Wednesday, November 16, 2016 at 10:12:43 PM UTC+1, Tom Keffer wrote: > > It should look something like this when you're done. > > [StdWXCalculate] > > ignore_zero_wind = false > > [[Calculations]] > # Derived quantities are calculated by this service. Possible values > are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > barometer = prefer_hardware > altimeter = prefer_hardware > windchill = prefer_hardware > heatindex = prefer_hardware > dewpoint = prefer_hardware > inDewpoint = prefer_hardware > rainRate = prefer_hardware > > > If that doesn't solve the problem, then we need to see more of the log. > You only included one second's worth. We need at least an archive period > (generally 5 to 10 minutes). > > -tk > > On Wed, Nov 16, 2016 at 12:01 PM, Paul Weber <[email protected] > <javascript:>> wrote: > >> Not sure if this is what you want. I did notice however that my insert >> of "ignore_zero_wind" is at the beginning of the list and not at the end so >> may >> be getting canceled? Anyway if this is not what you want let me know. >> Thanks for your help. >> >> >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx.engine >> .StdTimeSynch >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdTimeSynch >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx.engine >> .StdConvert >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: StdConvert target unit is >> 0x1 >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdConvert >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx.engine >> .StdCalibrate >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdCalibrate >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx.engine >> .StdQC >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdQC >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.wxservices.StdWXCalculate >> Nov 16 20:30:50 Mobil-1 weewx[8411]: wxcalculate: The following values >> will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, >> dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=hardware, >> windrun=prefer_hardware, heatindex=prefer_hardware, >> maxSolarRad=prefer_hardware, humidex=prefer_hardware, >> pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, >> altimeter=prefer_hardware, cloudbase=prefer_hardware >> Nov 16 20:30:50 Mobil-1 weewx[8411]: wxcalculate: The following >> algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.wxservices.StdWXCalculate >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.engine.StdArchive >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Archive will use data >> binding wx_binding >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Record generation will be >> attempted in 'hardware' >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Using archive interval of >> 300 seconds (specified in weewx configuration) >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Use LOOP data in hi/low >> calculations: 1 >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Using binding 'wx_binding' >> to database 'weewx.sdb' >> Nov 16 20:30:50 Mobil-1 weewx[8411]: manager: Starting backfill of daily >> summaries >> Nov 16 20:30:50 Mobil-1 weewx[8411]: manager: Daily summaries up to date >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdArchive >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdStationRegistry >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: StationRegistry: Station will >> not be registered: no station_url specified. >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdStationRegistry >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdWunderground >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: Wunderground-PWS: Data for >> station ILOGONEO2 will be posted >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdWunderground >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdPWSweather >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: PWSweather: Posting not >> enabled. >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdPWSweather >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdCWOP >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: CWOP: Posting not enabled. >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdCWOP >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdWOW >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: WOW: Posting not enabled. >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdWOW >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.restx.StdAWEKAS >> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: AWEKAS: Posting not enabled. >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.restx.StdAWEKAS >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.engine.StdPrint >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdPrint >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >> weewx.engine.StdReport >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >> weewx.engine.StdReport >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Starting up weewx version >> 3.6.2 >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Station does not support >> reading the time >> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Starting main packet loop. >> >> On Wednesday, November 16, 2016 at 4:28:51 PM UTC+1, Tom Keffer wrote: >>> >>> Edit weewx.conf, setting debug=1, then restart weewx. Post the system >>> log from weewx startup through the first archive record --- usually 15 >>> minutes or so is long enough. >>> >>> -tk >>> >>> On Wed, Nov 16, 2016 at 4:52 AM, Paul Weber <[email protected]> wrote: >>> >>>> Yes I stop it before editing then restart it. >>>> >>>> On Tuesday, November 15, 2016 at 9:54:18 PM UTC+1, Tom Keffer wrote: >>>>> >>>>> Did you restart weewx after changing weewx.conf? >>>>> >>>>> -tk >>>>> >>>>> >>>>> On Tue, Nov 15, 2016 at 12:33 PM, Paul Weber <[email protected]> wrote: >>>>> >>>>>> Hi, I'm a newb here. I installed weewx 3.6.2 yesterday and am very >>>>>> pleased with my success however I am experiencing this problem as >>>>>> well. (dotted lines on WU map indicating lack of data) Also my weewx >>>>>> out put says 0 m/s from N/A (N/A) My site is ILOGONEO2. I made >>>>>> the change in my config to ignore_zero_wind = false as >>>>>> suggested >>>>>> and there is no change. I am using a WMR100NA weather station. >>>>>> Also my station does not appear on weewx map either even though I >>>>>> have set publish = true >>>>>> >>>>>> >>>>>> On Saturday, November 12, 2016 at 6:06:32 AM UTC+1, Denny Page wrote: >>>>>>> >>>>>>> A moment presented itself. It does appear that this is fixed in >>>>>>> 3.6.2. I’ll have to double check tomorrow when wind comes and goes, >>>>>>> but it looks good right now when everything is completely calm. >>>>>>> >>>>>>> Thank you so much for fixing this. Greatly appreciated. >>>>>>> >>>>>>> Denny >>>>>>> >>>>>>> >>>>>>> On Nov 11, 2016, at 20:27, Denny Page <[email protected]> wrote: >>>>>>> >>>>>>> I haven’t checked 3.6, but in 3.5 setting ignore_zero_wind didn’t >>>>>>> fix a Vantage with rapidfire updates. It seemed to be a “known” >>>>>>> issue at the time, but I haven’t seen anything in the release notes >>>>>>> about >>>>>>> it. >>>>>>> >>>>>>> I’ll check 3.6.X as soon as I have a chance. >>>>>>> >>>>>>> Thanks, >>>>>>> Denny >>>>>>> >>>>>>> >>>>>>> On Nov 11, 2016, at 18:36, Thomas Keffer <[email protected]> wrote: >>>>>>> >>>>>>> OK, that's a different problem, one that is easily solved. Just set >>>>>>> option ignore_zero_wind to false >>>>>>> <http://weewx.com/docs/usersguide.htm#StdWXCalculate>. >>>>>>> >>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
