Hard to say without seeing the log. -tk
On Fri, Dec 9, 2016 at 10:13 AM, Barton Phillips <[email protected]> wrote: > My weather station has been working for years but a couple of days ago it > started to freeze after running several hours. When I looked at the > database the last entry was not updating. I was running 3.1.2 so I upgraded > to 3.6.2 but the same thing happens. I tried changing from sqlite to mysql > but still no help. What can I do to debug this problem? Do you think it > might be something wrong with the console? When I do 'wee_device > --clear-memory' it starts working again but within a day it freezes. The > 'Weewx > uptime: ' changes every 5 minutes so I know that the files are being > updated but the image times don't change and the date and time at the top > is frozen. > Any help would be appreciated. > > On Fri, Dec 9, 2016 at 3:54 AM, <[email protected]> wrote: > >> [email protected] >> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/weewx-user/topics> >> Google >> Groups >> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview> >> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview> >> Topic digest >> View all topics >> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/weewx-user/topics> >> >> - Ftp not requested >> <#m_7292631387944689624_m_2564176968598595675_group_thread_0> - 2 >> Updates >> - Replacing the Raspberry Pi >> <#m_7292631387944689624_m_2564176968598595675_group_thread_1> - 1 >> Update >> - forecast extension version 3.2.0 >> <#m_7292631387944689624_m_2564176968598595675_group_thread_2> - 1 >> Update >> - How to wipe out bad rain data >> <#m_7292631387944689624_m_2564176968598595675_group_thread_3> - 2 >> Updates >> - Upgrade to Mint 17.3 Rosa >> <#m_7292631387944689624_m_2564176968598595675_group_thread_4> - 4 >> Updates >> - Problem with Rsync and graphs >> <#m_7292631387944689624_m_2564176968598595675_group_thread_5> - 5 >> Updates >> - attaching a raspberry Pi weather station to the weewx system >> <#m_7292631387944689624_m_2564176968598595675_group_thread_6> - 1 >> Update >> - Weewx stops working: WH2320 using weewx-wh23xx driver and Sofaskin >> <#m_7292631387944689624_m_2564176968598595675_group_thread_7> - 1 >> Update >> >> Ftp not requested >> <http://groups.google.com/group/weewx-user/t/e2b2e2fa9271fb03?utm_source=digest&utm_medium=email> >> Auchtermuchty Weather <[email protected]>: Dec 09 02:58AM -0800 >> >> Getting the following on my newer RPi with Weewx 3.6.2: >> >> Dec 9 10:45:25 weather2 weewx[26990]: reportengine: Found configuration >> file /home/weewx/skins/Ftp/skin.conf for report FTP >> Dec 9 10:45:25 weather2 weewx[26990]: reportengine: FTP upload not >> requested. Skipped. >> >> Very puzzled as the details for Ftp in weewx.conf are the same as on the >> one which is working. >> >> FTP is installed: >> >> pi@weather2:~ $ type ftp >> ftp is /usr/bin/ftp >> Andrew Milner <[email protected]>: Dec 09 03:51AM -0800 >> >> We could possibly help if we knew what was actually in your weewx.conf >> rather than just taking your word for it!! >> >> Have you, for example, uncommented the lines which require uncommenting >> in >> the FTP section of stdReport in weewx.conf?? >> >> >> >> On Friday, 9 December 2016 12:58:24 UTC+2, Auchtermuchty Weather wrote: >> >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> Replacing the Raspberry Pi >> <http://groups.google.com/group/weewx-user/t/2d264471b98123c8?utm_source=digest&utm_medium=email> >> Auchtermuchty Weather <[email protected]>: Dec 09 02:41AM -0800 >> >> I realised that not only am I running an old (2.7) version of Weewx, the >> RPi it's on is short of room on the SD card - it's an old B model with an >> SD card. >> >> I had a B+ Pi doing nothing (Micro SD card, 4 USB ports) so I put the >> latest Raspberrian on an 8GB card and then installed Weewx and it's >> working >> fine with the simulator - the HTML files are being produced with correct >> units & layout. >> >> Not quite sure what the process of changing the two over is though. I >> know >> I will have to copy some stuff across (not a problem as both are on my >> network), not sure what stuff though. >> >> Nor am I sure if there are any 'gotchas' I need to be aware of. >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> forecast extension version 3.2.0 >> <http://groups.google.com/group/weewx-user/t/8d2103aed0aab547?utm_source=digest&utm_medium=email> >> mwall <[email protected]>: Dec 08 09:56PM -0800 >> >> this is a significant update to the forecasting extension. since the last >> stable release (3.0.8), this adds: >> >> - support for more forecast sources, including >> - US National Weather Service (NWS) >> - the weather underground (WU) >> - open weathermap (OWM) >> - UK Met Office (UKMO) >> - Aeris Weather >> - World Weather Online (WWO) >> - Zambretti >> - tide predictions using xtide >> >> - built-in templates for: >> - tabular display >> - strip display >> - simplified iconic display >> >> see the wiki for screenshots and details: >> >> https://github.com/weewx/weewx/wiki/forecasting >> >> m >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> How to wipe out bad rain data >> <http://groups.google.com/group/weewx-user/t/c5959a9e649dd778?utm_source=digest&utm_medium=email> >> [email protected]: Dec 08 05:55PM -0800 >> >> During the time when I was developing a new driver, I managed to get some >> ridiculous rain values in the database - even here we don't get rain that >> is measured in kilometres! >> >> I've tried to delete the very large 'rain' values form the database and >> also running the 'wee_database' tool to delete an recreate the daily >> totals >> but I'm still seeing very large values in any display/report that goes >> back >> beyond the current month. >> >> Is there a way to wipe all of those bad values (happy to show that it >> didn't rain at all) without scrapping the whole database (only about 6 >> weeks so not a total loss if I have to) and starting again? >> >> Susan >> gjr80 <[email protected]>: Dec 08 06:03PM -0800 >> >> Hi, >> >> You will probably get a number of answers but essentially if you have bad >> data in your archive you need to fix (all of) that then drop/rebuild >> daily >> summaries or you will be forever chasing your tail. You can work out >> where >> the issue is (daily summaries or archive) by based on where the bad data >> is >> showing up (plots, month/year stats etc). You will find some general info >> on how to deal with the issue in teh User's Guide >> <http://weewx.com/docs/usersguide.htm> under spikes in graphs >> <http://weewx.com/docs/usersguide.htm#spikes> (spikes or ridiculous data >> - >> same thing!) as well as in the wiki here >> <https://github.com/weewx/weewx/wiki/Cleaning%20up%20old%20'bad'%20data>. >> >> Gary >> >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> Upgrade to Mint 17.3 Rosa >> <http://groups.google.com/group/weewx-user/t/1acaa6f3de11dd85?utm_source=digest&utm_medium=email> >> Matt VanGiesen <[email protected]>: Dec 08 01:10PM -0800 >> >> I upgraded to 17.3 and lost ability to collect pool...was working OK >> until >> then, though slow to sync with pool sometimes. This has been cycling for >> 5+ >> hours now after rebooting and resetting weather station. Keep it simple, >> cause I'm stupid...or new to Linux (but loving and learning)! >> >> Log file: >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: retrying... >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using >> configuration >> file /etc/weewx/weewx.conf >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Initializing engine >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading station >> type AcuRite (weewx.drivers.acurite) >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: acurite: driver version is >> 0.24 >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: acurite: R2 will be >> decoded >> using sensor constants >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdTimeSynch >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdTimeSynch >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdConvert >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: StdConvert target >> unit is 0x1 >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdConvert >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdCalibrate >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdCalibrate >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdQC >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdQC >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.wxservices.StdWXCalculate >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: wxcalculate: The following >> values will be calculated: barometer=prefer_hardware, >> windchill=prefer_hardware, dewpoint=prefer_hardware, >> appTemp=prefer_hardware, rainRate=prefer_hardware, >> windrun=prefer_hardware, >> heatindex=prefer_hardware, maxSolarRad=prefer_hardware, >> humidex=prefer_hardware, pressure=prefer_hardware, >> inDewpoint=prefer_hardware, ET=prefer_hardware, >> altimeter=prefer_hardware, >> cloudbase=prefer_hardware >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: wxcalculate: The following >> algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.wxservices.StdWXCalculate >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdArchive >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Archive will use >> data binding wx_binding >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Record generation >> will be attempted in 'hardware' >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using archive >> interval of 300 seconds (specified in weewx configuration) >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Use LOOP data in >> hi/low calculations: 1 >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using binding >> 'wx_binding' to database 'weewx.sdb' >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: manager: Starting backfill >> of daily summaries >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: manager: Daily summaries >> up >> to date >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdArchive >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdStationRegistry >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: StationRegistry: >> Registration not requested. >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdStationRegistry >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdWunderground >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: Wunderground-PWS: >> Data for station KWAOAKHA61 will be posted >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdWunderground >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdPWSweather >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: PWSweather: Posting >> not enabled. >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdPWSweather >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdCWOP >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: CWOP: Posting not >> enabled. >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdCWOP >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdWOW >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: WOW: Posting not >> enabled. >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdWOW >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.restx.StdAWEKAS >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: AWEKAS: Posting not >> enabled. >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.restx.StdAWEKAS >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdPrint >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdPrint >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service >> weewx.engine.StdReport >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading >> service weewx.engine.StdReport >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Starting up weewx >> version 3.6.2 >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Station does not >> support reading the time >> Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Starting main >> packet loop. >> Dec 8 12:56:31 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:56:31 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 1 >> of 10 to get LOOP data: error sending control message: Protocol error >> Dec 8 12:56:31 matt-Inspiron-1750 kernel: [13871.146102] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 >> Dec 8 12:57:01 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:57:01 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 2 >> of 10 to get LOOP data: error sending control message: Protocol error >> Dec 8 12:57:01 matt-Inspiron-1750 kernel: [13901.412167] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 >> Dec 8 12:57:08 matt-Inspiron-1750 wpa_supplicant[842]: wlan0: >> CTRL-EVENT-SCAN-STARTED >> Dec 8 12:57:13 matt-Inspiron-1750 wpa_supplicant[842]: nl80211: >> send_and_recv->nl_recvmsgs failed: -33 >> Dec 8 12:57:31 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:57:31 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 3 >> of 10 to get LOOP data: error sending control message:Protocol error >> Dec 8 12:57:31 matt-Inspiron-1750 kernel: [13931.740325] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 >> Dec 8 12:58:02 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:58:02 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 4 >> of 10 to get LOOP data: error sending control message:Protocol error >> Dec 8 12:58:02 matt-Inspiron-1750 kernel: [13962.064412] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 >> Dec 8 12:58:32 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:58:32 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 5 >> of 10 to get LOOP data: error sending control message:Protocol error >> Dec 8 12:58:32 matt-Inspiron-1750 kernel: [13992.324531] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 >> Dec 8 12:59:02 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:59:02 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 6 >> of 10 to get LOOP data: error sending control message:Protocol error >> Dec 8 12:59:02 matt-Inspiron-1750 kernel: [14022.655655] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 >> Dec 8 12:59:08 matt-Inspiron-1750 wpa_supplicant[842]: wlan0: >> CTRL-EVENT-SCAN-STARTED >> Dec 8 12:59:32 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 12:59:32 matt-Inspiron-1750 kernel: [14052.871810] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 >> Dec 8 12:59:32 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 7 >> of 10 to get LOOP data: error sending control message:Protocol error >> Dec 8 13:00:03 matt-Inspiron-1750 weewx[1937]: acurite: Found station at >> bus=006 device=011 >> Dec 8 13:00:03 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 8 >> of 10 to get LOOP data: error sending control message: Protocol error >> Dec 8 13:00:03 matt-Inspiron-1750 kernel: [14083.182919] usb 6-2: usbfs: >> USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 >> mwall <[email protected]>: Dec 08 01:16PM -0800 >> >> On Thursday, December 8, 2016 at 4:10:34 PM UTC-5, Matt VanGiesen wrote: >> > then, though slow to sync with pool sometimes. This has been cycling >> for 5+ >> > hours now after rebooting and resetting weather station. Keep it >> simple, >> > cause I'm stupid...or new to Linux (but loving and learning)! >> >> what model of acurite console is it? >> >> is the console in usb mode 4? >> >> m >> Matt VanGiesen <[email protected]>: Dec 08 01:32PM -0800 >> >> 2032 in mode 4 >> >> But, when verifying the weewx.conf, I found typo in the model number...I >> believe when I re-installed after the upgrade weewx used an archived >> .conf >> file that was incorrect. I'm vetting it now for more errors.. >> Thanks for the great support and awesome program! >> >> On Thursday, December 8, 2016 at 1:16:02 PM UTC-8, mwall wrote: >> mwall <[email protected]>: Dec 08 02:12PM -0800 >> >> On Thursday, December 8, 2016 at 4:32:11 PM UTC-5, Matt VanGiesen wrote: >> >> > But, when verifying the weewx.conf, I found typo in the model >> number...I >> > believe when I re-installed after the upgrade weewx used an archived >> .conf >> > file that was incorrect. I'm vetting it now for more errors.. >> >> matt, >> >> first be sure that the console is in mode 4 (when you power cycle it, it >> will default to mode 2, which means no usb communication) >> >> if you see log messages about failed attempt x to get LOOP data more than >> 3 >> or 4 times, then unplug the usb cable from the computer or console, wait >> 30 >> seconds, then plug it back in. no need to restart the computer, restart >> weewx, or power cycle the acurite console. unplug/replug will force a usb >> reset. (for some reason a software reset of the usb does not always work >> on >> the acurite consoles) >> >> let us know how it goes >> >> m >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> Problem with Rsync and graphs >> <http://groups.google.com/group/weewx-user/t/302929e23fa6c465?utm_source=digest&utm_medium=email> >> Juan Antonio Mosquera <[email protected]>: Dec >> 08 12:02PM -0800 >> >> I am now using rsync to upload the files to a remote server. It seems to >> upload the data correctly but I have this error in creating the graphics, >> any ideas ?. >> It does not generate the same graphics as it generated with FTP. >> Thank you. >> >> >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** Traceback (most >> recent call last): >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/reportengine.py", line 238, in run >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** obj.start() >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/reportengine.py", line 271, in start >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** self.run() >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/cheetahgenerator.py", line 150, in run >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** ngen = >> self.generate(gen_dict[section_name], self.gen_ts) >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/cheetahgenerator.py", line 219, in generate >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** ngen += >> self.generate(section[subsection], gen_ts) >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/cheetahgenerator.py", line 219, in generate >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** ngen += >> self.generate(section[subsection], gen_ts) >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/cheetahgenerator.py", line 234, in generate >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** >> self.skin_dict['skin'])) >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** File >> "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in __getitem__ >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** val = >> dict.__getitem__(self, key) >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** KeyError: 'skin' >> Dec 8 20:58:14 raspberrypi weewx[26137]: **** Generator terminated >> Dec 8 20:58:18 raspberrypi weewx[26137]: genimages: Generated 12 images >> for FTP in 4.26 seconds >> Dec 8 20:58:18 raspberrypi weewx[26137]: reportengine: Caught >> unrecoverable exception in generator weewx.reportengine.CopyGenerator >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** 'skin' >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** Traceback (most >> recent call last): >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/reportengine.py", line 238, in run >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** obj.start() >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/reportengine.py", line 271, in start >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** self.run() >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** File >> "/usr/share/weewx/weewx/reportengine.py", line 415, in run >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** >> self.skin_dict['skin'])) >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** File >> "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in __getitem__ >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** val = >> dict.__getitem__(self, key) >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** KeyError: 'skin' >> Dec 8 20:58:18 raspberrypi weewx[26137]: **** Generator terminated >> Dec 8 20:58:28 raspberrypi weewx[26137]: rsyncupload: rsync'd 43 files >> (313,081 bytes) in 9.52 seconds >> gjr80 <[email protected]>: Dec 08 12:13PM -0800 >> >> Hi, >> >> You likely have a missing skin= setting for a report under [StdReport] in >> weewx.conf - have a look at all of your [[]] stanzas. If you can't find the >> error either puot a wee_debug output or post a copy of your weewx.conf with >> any sensitive info removed. >> >> Gary >> Juan Antonio Mosquera <[email protected]>: Dec >> 08 10:27PM +0100 >> >> yes, weewx.conf thanks >> >> gjr80 <[email protected]>: Dec 08 01:33PM -0800 >> >> So it's fixed? >> >> On Friday, 9 December 2016 07:27:46 UTC+10, Juan Antonio Mosquera wrote: >> Juan Antonio Mosquera <[email protected]>: Dec >> 08 01:45PM -0800 >> >> Yes, >> I had commented on the skin = Ftp line and not the connection data. I >> uncommented that line and commented on the connection data. Now the >> upload >> is done only by rsync. >> Thank you. >> >> El jueves, 8 de diciembre de 2016, 22:33:34 (UTC+1), gjr80 escribió: >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> attaching a raspberry Pi weather station to the weewx system >> <http://groups.google.com/group/weewx-user/t/ce197823ba11b6df?utm_source=digest&utm_medium=email> >> TasmDevil1 <[email protected]>: Dec 08 10:09AM -0800 >> >> Thank you >> >> Am Mittwoch, 7. Dezember 2016 14:47:58 UTC+1 schrieb mwall: >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> Weewx stops working: WH2320 using weewx-wh23xx driver and Sofaskin >> <http://groups.google.com/group/weewx-user/t/f2868175914be14f?utm_source=digest&utm_medium=email> >> Nicky G <[email protected]>: Dec 08 04:30AM -0800 >> >> Thank you very much! I will give it a try and let you know how I go on >> and >> will check through the logs for decode failed messages. >> >> Thanks, >> Nicky >> >> On Wednesday, December 7, 2016 at 10:37:36 PM UTC, mwall wrote: >> Back to top <#m_7292631387944689624_m_2564176968598595675_digest_top> >> You received this digest because you're subscribed to updates for this >> group. You can change your settings on the group membership page >> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/weewx-user/join> >> . >> To unsubscribe from this group and stop receiving emails from it send an >> email to [email protected]. >> > > > > -- > Sent From my Good Old Desktop PC. > > Barton Phillips > Granby Rotary Club > http://www.granbyrotary.org > Applitec Inc. > http://www.applitec.com > Personal > http://www.bartonphillips.com > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
