I have now input local sea level pressure to my WMR968 and the barometer limit errors have ceased. Thank you for the help!
On Fri, Dec 30, 2016 at 7:33 AM, Andrew Milner <[email protected]> wrote: > Remember to make sure you are comparing apples with apples and are > correctly understanding the weewx terminology for barometer, pressure and > altimeter - see the wiki > https://github.com/weewx/weewx/wiki/Barometer,-pressure,-and-altimeter > > It is possible other stations may be showing 'wrong' values!! Usually > airports etc report sea level pressures to ensure consistency. Sea level > pressures will always be higher than straight pressures taken at altitude > .... > > > > On Friday, 30 December 2016 16:25:50 UTC+2, Matthew wrote: > >> I have not. I think I missed that step when I was installing things. I'll >> have a look at the manual -- thank you for the suggestion. >> >> On Friday, December 30, 2016 at 7:20:40 AM UTC-7, Andrew Milner wrote: >>> >>> One further thing - have you actually set the sea level pressure so that >>> the instrument is able to deliver both pressure and barometer readings? >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/gvO1QRh3fxE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Matthew McCleary KF5VUD voice 505.886.1732 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
