wind speed and direction work for me. In weewx no direction is shown if speed is zero. You getting speed and direction on the console?
On Friday, December 30, 2016 at 9:00:29 PM UTC-8, Jeffrey Forbes wrote: > > I got the same unit from Costco and I have been able to get it to work > with weewx; however, I am not getting wind speed and direction. > Is that working for you? > > Jeff > > On Thursday, December 29, 2016 at 12:14:57 AM UTC-5, Scott Beard wrote: >> >> Marcus, >> >> I have been running one of these units with weewx on a RPI3 since mid >> October. The console is telling me the log is full and to connect it to >> the PC to clear it out. It has been telling me that since 12 days after I >> set it up. But it still works fine with weewx. From what I can tell, the >> Acurite 01536 is based on the 02064 but is specific to Costco and has a >> slightly different screen layout. >> >> Thanks >> Scott >> >> On Sunday, December 25, 2016 at 1:17:58 PM UTC-6, Marcus Watkins wrote: >>> >>> For Christmas today I received an Acurite 01536 5-in-1 weather station >>> with USB connection (from Costco). I set it up with weewx and was excited >>> to see it works out of the box for the most part. >>> >>> One difference from the docs is there's no 'USB Mode' switch on this >>> base, so I'm interested to see if the log fills up over time. >>> >>> The only real 'issue' is the barometer reads outside the values allowed >>> by weewx by default. I'm also seeing values vary by quite a bit, but it's >>> super windy out right now. I added an adjustment to match the display, >>> we'll see how it lines up over time. >>> >>> Does anyone know if the display reports barometer or pressure? >>> >>> All in all, seems to be working great. >>> >>> -Marcus >>> >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
