Should be no problems with those StdQC settings, as long as (1) the units used are appropriate for that observation (ie degree_C is good for outTemp but not so good for rain) and (2) weewx knows how to convert between the database units for the observation and the specified units (eg US database will have rain in inches, QC setting of rain in mm is good, US database will have pressure in inHg but a QC setting of pressure in atmospheres would not be good).
I just put those same QC settings in a test machine here and it generated with no errors. Gary On Thursday, 19 January 2017 08:54:52 UTC+10, Glenn McKechnie wrote: > > Question for those more knowledgeable. Can you mix units in the weewx.conf > file? > > Dan's database is in US units > His StdQC has both imperial and metric - specifically mile_per_hour and > mm_per_hour which coincides with the error message's units > I was under the impression that unit switching was more a skin.conf > action? That the weewx engine was one or the other. > > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > outTemp = -50, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 93, mile_per_hour > rain = 0, 150, mm > rainRate = 0, 200, mm_per_hour > pressure = 24, 34.5, inHg > > > Cheers > Glenn > > rorpi - read only raspberry pi + weewx: now with scripts > <https://github.com/glennmckechnie/rorpi-raspberrypi> > > On 19 January 2017 at 09:48, gjr80 <[email protected] <javascript:>> > wrote: > >> I don't know if split debug and message logs is supposed to be a feature >> or not, but it can certainly make it tedious working out what happened in >> what sequence. >> >> So the error is with the reports being generated from the Standard skin >> tmpl files. Have you checked the Standard skin config file ( >> /home/weewx/skins/Standard/skin.conf) for errors? Might be worth posting >> that, there should be no personal info in it. >> >> Gary >> >> >> On Thursday, 19 January 2017 07:34:33 UTC+10, DS wrote: >>> >>> Thanks for the quick response. I have attached messages and debug log >>> for a couple cycles. >>> >>> Dan >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
