Thanks for the tip. The only device I have in addition to the Vantage Pro 2 is the Davis Ethernet adapter which connects the Davis box via ethernet to my server running WeeWX.
As you see from my config, the Davis interface IP is 172.20.100.40. I tried to connect via port 80 but no answer, when I tried via port 22222 the connection was reset. Do you have any more info on this scenario..? regards Tor fredag 27. januar 2017 23.33.15 UTC+1 skrev Tom Keffer følgende: > > I take it you have a Weatherlink IP logger? > > Have you disabled it from talking to the Davis Weatherlink site? > Unfortunately, the way weewx is written, it is not possible to use weewx > AND send data to the WL website. You must choose one or the other. To > disable it, open a web browser, using the IP address of your WLIP. You > should see a checkbox to disable it from talking to the WL website. > > Mind you, I do not own a WLIP, so this is all second-hand knowledge! > > -tk > > > On Fri, Jan 27, 2017 at 12:10 PM, <[email protected] <javascript:>> wrote: > >> Using configuration file /etc/weewx/weewx.conf >> Using database binding 'wx_binding', which is bound to database >> 'archive_sqlite' >> >> System info >> cpu cores: 2 >> bogomips: 4799.99 >> core id: 1 >> apicid: 1 >> fpu_exception: yes >> stepping: 6 >> cache_alignment: 64 >> clflush size: 64 >> microcode: 0x36 >> cache size: 15360 KB >> cpuid level: 10 >> fpu: yes >> model name: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz >> siblings: 2 >> physical id: 0 >> address sizes: 43 bits physical, 48 bits virtual >> cpu family: 6 >> vendor_id: GenuineIntel >> wp: yes >> power management: >> flags: fpu vme de pse tsc msr pae mce cx8 apic sep >> mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx >> lm constant_tsc arch_perfmon pebs bts nopl tsc_reliable nonstop_tsc >> aperfmperf pni ssse3 cx16 sse4_1 tsc_deadline_timer hypervisor lahf_lm ida >> arat epb pln pts dtherm tsc_adjust >> cpu MHz: 2399.998 >> model: 23 >> processor: 1 >> initial apicid: 1 >> >> Operating system: debian 8.7 >> Linux intranet 3.16.0-4-amd64 #1 SMP Debian >> 3.16.39-1 (2016-12-30) x86_64 >> 1 minute load average: 0.00 >> 5 minute load average: 0.02 >> 15 minute load average: 0.06 >> >> General weewx info >> Weewx version 3.6.2 detected. >> >> Station info >> Station type: Vantage >> Driver: weewx.drivers.vantage >> >> Driver info >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP) >> type = ethernet >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 172.20.100.40 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 4 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> Currently installed extensions >> No extensions installed >> >> Archive info >> Database name: weewx.sdb >> Table name: archive >> Unit system: 1 (US) >> First good timestamp: 2009-02-26 14:30:00 CET (1235655000) >> Last good timestamp: 2017-01-27 21:00:00 CET (1485547200) >> Number of records: 138272 >> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >> The station hardware was not interrogated in determining archive >> interval. >> >> Databases configured in weewx.conf >> Database name: weewx.sdb >> Database driver: weedb.sqlite >> >> Database name: weewx >> Database driver: weedb.mysql >> Database host: localhost >> >> >> Parsed and obfuscated weewx.conf >> # WEEWX CONFIGURATION FILE >> # >> # Copyright (c) 2009-2015 Tom Keffer <[email protected] <javascript:>> >> # See the file LICENSE.txt for your rights. >> >> >> ############################################################################## >> >> # This section is for general configuration information. >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> debug = 1 >> >> # Root directory of the weewx data file hierarchy for this station >> WEEWX_ROOT = / >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> socket_timeout = 20 >> >> # Do not modify this. It is used when installing and updating weewx. >> version = 3.6.2 >> >> >> ############################################################################## >> >> # This section is for information about the station. >> >> [Station] >> >> # Description of the station location >> location = Framnes KVGS >> >> # Latitude and longitude in decimal degrees >> latitude = 60.351 >> longitude = 6.182354 >> >> # Altitude of the station, with unit it is in. This is downloaded from >> # from the station if the hardware supports it. >> altitude = 28, meter >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> # in this file with a 'driver' parameter indicating the driver to be >> used. >> station_type = Vantage >> >> # If you have a website, you may specify an URL >> #station_url = http://www.example.com >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> # downloaded from the station if the hardware supports it. >> rain_year_start = 10 >> >> # Start of week (0=Monday, 6=Sunday) >> week_start = 0 >> >> >> ############################################################################## >> >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP) >> type = ethernet >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 172.20.100.40 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 4 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> >> ############################################################################## >> >> # This section is for uploading data to Internet sites >> >> [StdRESTful] >> >> [[StationRegistry]] >> # To register this weather station with weewx, set this to true >> register_this_station = false >> >> [[AWEKAS]] >> # This section is for configuring posts to AWEKAS. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a username and password. >> enable = false >> username = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[CWOP]] >> # This section is for configuring posts to CWOP. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify the station ID (e.g., CW1234). >> enable = false >> station = XXX obfuscated by wee_debug XXX >> >> # If this is an APRS (radio amateur) station, uncomment >> # the following and replace with a passcode (e.g., 12345). >> #passcode = replace_me (APRS stations only) >> >> [[PWSweather]] >> # This section is for configuring posts to PWSweather.com. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[WOW]] >> # This section is for configuring posts to WOW. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[Wunderground]] >> # This section is for configuring posts to the Weather >> Underground. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station (e.g., 'KORHOODR3') and password. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> # Set the following to True to have weewx use the WU "Rapidfire" >> # protocol. Not all hardware can support it. See the User's Guide. >> rapidfire = False >> >> >> ############################################################################## >> >> # This section specifies what reports, using which skins, to generate. >> >> [StdReport] >> >> # Where the skins reside, relative to WEEWX_ROOT >> SKIN_ROOT = /etc/weewx/skins >> >> # Where the generated reports should go, relative to WEEWX_ROOT >> HTML_ROOT = /var/www/html/weewx >> >> # The database binding indicates which data should be used in reports. >> data_binding = wx_binding >> >> # Each of the following subsections defines a report that will be run. >> >> [[StandardReport]] >> # See the customizing guide to change the units, plot types and >> line >> # colors, modify the fonts, display additional sensor data, and >> other >> # customizations. Many of those changes can be made here by >> overriding >> # parameters, or by modifying templates within the skin itself. >> >> # The StandardReport uses the 'Standard' skin, which contains the >> # images, templates and plots for the report. >> skin = Standard >> [[[Units]]] >> [[[[Groups]]]] >> group_altitude = meter >> group_speed2 = meter_per_second2 >> group_pressure = mbar >> group_rain = mm >> group_rainrate = mm_per_hour >> group_temperature = degree_C >> group_degree_day = degree_C_day >> group_speed = meter_per_second >> >> [[FTP]] >> # FTP'ing the results to a webserver is treated as just another >> report, >> # albeit one with an unusual report generator! >> skin = Ftp >> >> # If you wish to use FTP, uncomment and fill out the next four >> lines. >> #user = replace with the ftp username >> #password = replace with the ftp password >> #server = replace with the ftp server name, e.g, >> www.threefools.org >> #path = replace with the ftp destination directory (e.g., >> /weather) >> >> # Set to True for an FTP over TLS (FTPS) connection. Not all >> servers >> # support this. >> secure_ftp = False >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Most FTP servers use port 21 >> port = 21 >> >> # Set to 1 to use passive mode, zero for active mode >> passive = 1 >> >> [[RSYNC]] >> # rsync'ing to a webserver is treated as just another report >> skin = Rsync >> >> # If you wish to use rsync, you must configure passwordless ssh >> using >> # public/private key authentication from the user account that >> weewx >> # runs as to the user account on the remote machine where the >> files >> # will be copied. >> # >> # The following three lines determine where files will be sent. >> #server = replace with the rsync server name, e.g, >> www.threefools.org >> #path = replace with the rsync destination directory (e.g., >> /weather) >> #user = replace with the rsync username >> >> # Rsync can be configured to remove files from the remote server >> if >> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >> you >> # make a mistake in the remote path, you could could >> unintentionally >> # cause unrelated files to be deleted. Set to 1 to enable remote >> file >> # deletion, zero to allow files to accumulate remotely. >> delete = 0 >> >> >> ############################################################################## >> >> # This service acts as a filter, converting the unit system coming from >> # the hardware to a unit system in the database. >> >> [StdConvert] >> >> # The target_unit affects only the unit system in the database. Once >> # chosen it cannot be changed without converting the entire database. >> # Modification of target_unit after starting weewx will result in >> # corrupt data - the database will contain a mix of US and METRIC >> data. >> # >> # The value of target_unit does not affect the unit system for >> # reporting - reports can display US, Metric, or any combination of >> units. >> # >> # In most cases, target_unit should be left as the default: US >> # >> # In particular, those migrating from a standard wview installation >> # should use US since that is what the wview database contains. >> >> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >> >> >> ############################################################################## >> >> # This section can adjust data using calibration expressions. >> >> [StdCalibrate] >> >> [[Corrections]] >> # For each type, an arbitrary calibration expression can be >> given. >> # It should be in the units defined in the StdConvert section. >> # Example: >> foo = foo + 0.2 >> >> >> ############################################################################## >> >> # This section is for quality control checks. If units are not >> specified, >> # values must be in the units defined in the StdConvert section. >> >> [StdQC] >> >> [[MinMax]] >> barometer = 26, 32.5, inHg >> outTemp = -40, 120, degree_F >> inTemp = 10, 120, degree_F >> outHumidity = 0, 100 >> inHumidity = 0, 100 >> windSpeed = 0, 120, mile_per_hour >> pressure = 24, 34.5, inHg >> >> >> ############################################################################## >> >> # This section controls the origin of derived values. >> >> [StdWXCalculate] >> >> [[Calculations]] >> # Derived quantities are calculated by this service. Possible >> values are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> barometer = prefer_hardware >> altimeter = prefer_hardware >> windchill = prefer_hardware >> heatindex = prefer_hardware >> dewpoint = prefer_hardware >> inDewpoint = prefer_hardware >> rainRate = prefer_hardware >> >> >> ############################################################################## >> >> # For hardware that supports it, this section controls how often the >> # onboard clock gets updated. >> >> [StdTimeSynch] >> >> # How often to check the weather station clock for drift (in seconds) >> clock_check = 14400 >> >> # How much it can drift before we will correct it (in seconds) >> max_drift = 5 >> >> >> ############################################################################## >> >> # This section is for configuring the archive service. >> >> [StdArchive] >> >> # If the station hardware supports data logging then the archive >> interval >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> archive_interval = 300 >> >> # If possible, new archive records are downloaded from the station >> # hardware. If the hardware does not support this, then new archive >> # records will be generated in software. >> # Set the following to "software" to force software record generation. >> record_generation = hardware >> >> # Whether to include LOOP data in hi/low statistics >> loop_hilo = True >> >> # The data binding used to save archive records >> data_binding = wx_binding >> >> >> ############################################################################## >> >> # This section binds a data store to a database. >> >> [DataBindings] >> >> [[wx_binding]] >> # The database must match one of the sections in [Databases]. >> # This is likely to be the only option you would want to change. >> database = archive_sqlite >> # The name of the table within the database >> table_name = archive >> # The manager handles aggregation of data for historical summaries >> manager = weewx.wxmanager.WXDaySummaryManager >> # The schema defines the structure of the database. >> # It is *only* used when the database is created. >> schema = schemas.wview.schema >> >> >> ############################################################################## >> >> # This section defines various databases. >> >> [Databases] >> >> # A SQLite database is simply a single file >> [[archive_sqlite]] >> database_type = SQLite >> database_name = weewx.sdb >> >> # MySQL >> [[archive_mysql]] >> database_type = MySQL >> database_name = weewx >> >> >> ############################################################################## >> >> # This section defines defaults for the different types of databases. >> >> [DatabaseTypes] >> >> # Defaults for SQLite databases >> [[SQLite]] >> driver = weedb.sqlite >> # Directory in which the database files are located >> SQLITE_ROOT = /var/lib/weewx >> >> # Defaults for MySQL databases >> [[MySQL]] >> driver = weedb.mysql >> # The host where the database is located >> host = localhost >> # The user name for logging in to the host >> user = XXX obfuscated by wee_debug XXX >> # The password for the user name >> password = XXX obfuscated by wee_debug XXX >> >> >> ############################################################################## >> >> # This section configures the internal weewx engine. >> >> [Engine] >> >> [[Services]] >> # This section specifies the services that should be run. They are >> # grouped by type, and the order of services within each group >> # determines the order in which the services will be run. >> prep_services = weewx.engine.StdTimeSynch >> data_services = , >> process_services = weewx.engine.StdConvert, >> weewx.engine.StdCalibrate, weewx.engine.StdQC, >> weewx.wxservices.StdWXCalculate >> archive_services = weewx.engine.StdArchive >> restful_services = weewx.restx.StdStationRegistry, >> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS >> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >> >> >> >> fredag 27. januar 2017 20.56.01 UTC+1 skrev vince følgende: >>> >>> On Friday, January 27, 2017 at 11:35:46 AM UTC-8, [email protected] >>> wrote: >>>> >>>> So I installed weewx in my debian box and copied the wview database >>>> over, got everything up and running in a short time. - A part from pulling >>>> data from the Davis box. I have the correct IP address and port number. >>>> The debian box can ping the Davis unit too. The wview daemon is stopped >>>> so >>>> it shouldn't interfere. But there seems to be no or at least broken >>>> communication. Under wview there was never any communication problems. >>>> Do >>>> I have to reset the Davis box in order to get it accept the weewx daemon? >>>> What can be the problem? Does it exist different drivers for Davis units? >>>> Thanks for comments! >>>> >>>> >>>> >>> We'd have to see your config file - see >>> http://www.weewx.com/docs/utilities.htm#wee_debug_utility and run the >>> utility and post the (obfuscated) config file please. >>> >>> [...matthew/tom/gary - do we have a 'how to report a problem' wiki page >>> ? I couldn't find one in a quick scan of the online wiki/docs....] >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
