Lloyd, I think I managed to suppress but it has been so long that I've been in the code that I'll be dipped if I can remember or find what change(s) were made. I know I tried a delay in the Moteino until a temperature was logged from the station, but that is commented out. Can't get into the Pi to check the code there. Sorry.
On Monday, February 20, 2017 at 7:40:44 AM UTC-6, Lloyd Brown wrote: > > Jeff: > > I know this is a couple years old but did you ever find out how to > suppress the bad data? I have a similar setup and resorted to just putting > in a UPS but that does not help when you do have to stop the process. Get > zero on the temperature on boot up which messes > up the data. Any information would be appreciated. > Thanks > Lloyd > > > > On Saturday, September 19, 2015 at 7:10:10 AM UTC-6, Jeff Gschwend wrote: >> >> Thanks Tom. That will help. Thinking I'll move things over to the Mac and >> test there, to make sure it's reproducible and maybe a little less >> convoluted than SSHing into the Pi. Unfortunately, weekend chores have >> expanded to fill the void and I may not have much time now. Will post on >> what I find, when I get a chance to dig into this. >> >> jeff >> >> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
