Do you know if this data is available from the Accurate line of sensors ? If so, where does this code go ?
Jerry, KB2GCG On Saturday, February 18, 2017 at 8:03:31 AM UTC-5, Luc Heijst wrote: > > I have got several devices which produce a bad battery status with value=1 > when bad. These tags were combined in one plot to save space on my web page. > Originally I created line plots varying from 0 (batt. ok) to 1 (batt. > low). The disadvantage of this plot type is that only one low battery > status is shown. The other low battery line plots (when they exists) are > overwritten by the first one. > So I searched a way to overcome this problem. The solution is to use the > sum value for each plot with each a unique aggregate_interval. > See the code below of my skin.conf file and the attached plots of the old > and new presentation. > > [[[weekbattery]]] > image_height = 140 > # Make the y-axis increment at least 0.02 for the battery plot: > yscale = None, None, 0.02 > plot_type = bar > [[[[txBatteryStatusSum]]]] > label = Battery status Davis tx > data_binding = vpro_binding > data_type = txBatteryStatus > aggregate_type = sum > aggregate_interval = 1200 # == 20 minutes > [[[[inTempBatteryStatusSum]]]] > label = Opus console > data_binding = ws28_binding > data_type = inTempBatteryStatus > aggregate_type = sum > aggregate_interval = 1800 # == 30 minutes > [[[[outTempBatteryStatusSum]]]] > label = tmp/hum > data_binding = ws28_binding > data_type = outTempBatteryStatus > aggregate_type = sum > aggregate_interval = 2400 # == 40 minutes > [[[[windBatteryStatusSum]]]] > label = wind > data_binding = ws28_binding > data_type = windBatteryStatus > aggregate_type = sum > aggregate_interval = 3000 # == 50 minutes > [[[[rainBatteryStatusSum]]]] > label = rain > data_binding = ws28_binding > data_type = rainBatteryStatus > aggregate_type = sum > aggregate_interval = 3600 # == 60 minutes > > Cheers, > Luc > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
