Definitely a problem. We should have a solution soon. -tk
On Mon, Mar 13, 2017 at 7:51 AM, Mauro De Lauretis < [email protected]> wrote: > > > I have the same problem after uploading to 3.7.0 version > > > Il giorno lunedì 13 marzo 2017 15:12:38 UTC+1, WindnFog ha scritto: > >> Good day, gentlemen, >> >> I just upgraded to 3.7.0. It is working well with the exception of >> rapidfire to Wunderground. It works with Wunderground using the >> station/password, just seems to kill the Wunderground-RF thread on start up: >> >> >> Mar 13 10:08:43 norge weewx[3814]: engine: Initializing weewx version >> 3.7.0 >> Mar 13 10:08:43 norge weewx[3814]: engine: Using Python 2.7.5 (default, >> Nov 6 2016, 00:28:07) >> [GCC 4.8.5 20150623 (Red Hat >> 4.8.5-11)] >> Mar 13 10:08:43 norge weewx[3814]: engine: Platform >> Linux-3.10.0-514.10.2.el7.x86_64-x86_64-with-centos-7.3.1611-Core >> Mar 13 10:08:43 norge weewx[3814]: engine: Locale is 'en_CA.UTF-8' >> Mar 13 10:08:43 norge weewx[3814]: engine: pid file is /var/run/weewx.pid >> Mar 13 10:08:43 norge weewx[3819]: engine: Using configuration file >> /etc/weewx/weewx.conf >> Mar 13 10:08:43 norge weewx[3819]: engine: Loading station type Vantage >> (weewx.drivers.vantage) >> Mar 13 10:08:43 norge weewx[3809]: Starting weewx: [ OK ] >> Mar 13 10:08:43 norge polkitd[834]: Unregistered Authentication Agent for >> unix-process:3803:64651857 (system bus name :1.19408, object path >> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_CA.UTF-8) >> (disconnected from bus) >> Mar 13 10:08:43 norge weewx[3819]: engine: StdConvert target unit is 0x10 >> Mar 13 10:08:43 norge weewx[3819]: wxcalculate: The following values will >> be calculated: barometer=prefer_hardware, windchill=software, >> dewpoint=prefer_hardware, appTemp=prefer_hardware, >> rainRate=prefer_hardware, windrun=prefer_hardware, >> heatindex=prefer_hardware, maxSolarRad=prefer_hardware, >> humidex=prefer_hardware, pressure=prefer_hardware, >> inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, >> cloudbase=prefer_hardware >> Mar 13 10:08:43 norge weewx[3819]: wxcalculate: The following algorithms >> will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS >> Mar 13 10:08:43 norge weewx[3819]: engine: Archive will use data binding >> wx_binding >> Mar 13 10:08:43 norge weewx[3819]: engine: Record generation will be >> attempted in 'hardware' >> Mar 13 10:08:43 norge weewx[3819]: engine: Using archive interval of 300 >> seconds (specified by hardware) >> Mar 13 10:08:43 norge weewx[3819]: engine: Using binding 'wx_binding' to >> database 'weewx.sdb' >> Mar 13 10:08:43 norge weewx[3819]: manager: Starting backfill of daily >> summaries >> Mar 13 10:08:43 norge weewx[3819]: restx: StationRegistry: Station will >> be registered. >> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Data for >> station INOVASCO212 will be posted >> Mar 13 10:08:43 norge weewx[3819]: restx: PWSWeather: Data for station >> LakeEcho01 will be posted >> Mar 13 10:08:43 norge weewx[3819]: restx: CWOP: Data for station VE1DX >> will be posted >> Mar 13 10:08:43 norge weewx[3819]: restx: WOW: Data for station 953456001 >> will be posted >> Mar 13 10:08:43 norge weewx[3819]: restx: AWEKAS: Data will be uploaded >> for user VE1DX >> Mar 13 10:08:43 norge weewx[3819]: restx: WeatherCloud: service version >> is 0.10 >> Mar 13 10:08:43 norge weewx[3819]: restx: WeatherCloud: Data will be >> uploaded for id=3563c30a5fb9c1d6 >> Mar 13 10:08:43 norge weewx[3819]: engine: Starting up weewx version 3.7.0 >> Mar 13 10:08:43 norge weewx[3819]: engine: Clock error is 0.37 seconds >> (positive is fast) >> Mar 13 10:08:43 norge weewx[3819]: engine: Starting main packet loop. >> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Unexpected >> exception of type <type 'exceptions.ValueError'> >> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Thread >> exiting. Reason: Inconsistent units (16 vs 16 vs 1) when querying for >> hourRain >> >> >> If I disable rapidfire in the Wunderground section of >> /etc/weewx/weewx.conf it stops this, but I'm looking for a suggestion as to >> where to look to resolve thehourRain inconsistency. I may have missed >> something in the list of upgrade notes. >> I didn't change the length of your archive interval, nor do I intend to. >> I don't think the interval bug on weighting applies to me, does it? >> >> I don't see anything in the change log that applies to this, >> either. I'd like to use rapidfire with Wunderground again . . . I'm sure >> it's something simple I missed. >> >> Here is my weewx.debug (with the Wunderground rapidfire temporarily >> set to false): >> >> Using configuration file /etc/weewx/weewx.conf >> Using database binding 'wx_binding', which is bound to database >> 'archive_sqlite' >> >> System info >> cpu cores: 4 >> bogomips: 7996.10 >> core id: 3 >> apicid: 7 >> fpu_exception: yes >> stepping: 3 >> cache_alignment: 64 >> clflush size: 64 >> microcode: 0x20 >> cache size: 8192 KB >> cpuid level: 13 >> fpu: yes >> model name: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz >> siblings: 8 >> physical id: 0 >> address sizes: 39 bits physical, 48 bits virtual >> cpu family: 6 >> vendor_id: GenuineIntel >> wp: yes >> power management: >> flags: fpu vme de pse tsc msr pae mce cx8 apic sep >> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >> syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good >> nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor >> ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe >> popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat >> epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase >> tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt >> cpu MHz: 2822.968 >> model: 60 >> processor: 7 >> initial apicid: 7 >> >> Operating system: CentOS Linux 7.3.1611 Core >> Linux norge 3.10.0-514.10.2.el7.x86_64 #1 SMP >> Fri Mar 3 00:04:05 UTC 2017 x86_64 >> 1 minute load average: 0.01 >> 5 minute load average: 0.04 >> 15 minute load average: 0.05 >> >> General weewx info >> Weewx version 3.7.0 detected. >> >> Station info >> Station type: Vantage >> Driver: weewx.drivers.vantage >> >> Driver info >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP) >> type = serial >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 1.2.3.4 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 1 >> >> # The id of your ISS station (usually 1) >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 5 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> Currently installed extensions >> Extension Name Version Description >> wcloud 0.10 Upload weather data to WeatherCloud. >> >> Archive info >> Database name: weewx.sdb >> Table name: archive >> Unit system: 16 (METRIC) >> First good timestamp: 2015-09-27 20:06:00 ADT (1443395160) >> Last good timestamp: 2017-03-13 10:55:00 ADT (1489413300) >> Number of records: 156379 >> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >> The station hardware was not interrogated in determining archive >> interval. >> >> Databases configured in weewx.conf >> Database name: weewx.sdb >> Database driver: weedb.sqlite >> >> Database name: weewx >> Database driver: weedb.mysql >> Database host: localhost >> >> >> Parsed and obfuscated weewx.conf >> # WEEWX CONFIGURATION FILE >> # >> # Copyright (c) 2009-2015 Tom Keffer <[email protected]> >> >> # See the file LICENSE.txt for your rights. >> >> ############################################################ >> ################## >> >> # This section is for general configuration information. >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> debug = 0 >> >> # Root directory of the weewx data file hierarchy for this station >> WEEWX_ROOT = /home/weewx >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> socket_timeout = 20 >> >> # Do not modify this. It is used when installing and updating weewx. >> version = 3.7.0 >> >> ############################################################ >> ################## >> >> # This section is for information about the station. >> >> [Station] >> >> # Description of the station location >> location = "Lake Echo, Nova Scotia" >> >> # Latitude and longitude in decimal degrees >> latitude = 44.73794 >> longitude = -63.37766 >> >> # Altitude of the station, with unit it is in. This is downloaded from >> # from the station if the hardware supports it. >> altitude = 29, meter # Choose 'foot' or 'meter' for unit >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> # in this file with a 'driver' parameter indicating the driver to be >> used. >> station_type = Vantage >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> # downloaded from the station if the hardware supports it. >> rain_year_start = 1 >> >> # Start of week (0=Monday, 6=Sunday) >> week_start = 6 >> >> # If you have a website, you may specify a URL >> station_url = XXX obfuscated by wee_debug XXX >> >> ############################################################ >> ################## >> >> [Simulator] >> # This section is for the weewx weather station simulator >> >> # The time (in seconds) between LOOP packets. >> loop_interval = 2.5 >> >> # The simulator mode can be either 'simulator' or 'generator'. >> # Real-time simulator. Sleep between each LOOP packet. >> mode = simulator >> # Generator. Emit LOOP packets as fast as possible (useful for >> testing). >> #mode = generator >> >> # The start time. If not specified, the default is to use the present >> time. >> #start = 2011-01-01 00:00 >> >> # The driver to use: >> driver = weewx.drivers.simulator >> >> >> ############################################################ >> ################## >> >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP) >> type = serial >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 1.2.3.4 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 1 >> >> # The id of your ISS station (usually 1) >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 5 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> ############################################################ >> ################## >> >> # This section is for uploading data to Internet sites >> >> [StdRESTful] >> >> [[StationRegistry]] >> # To register this weather station with weewx, set this to true >> register_this_station = true >> station_url = XXX obfuscated by wee_debug XXX >> >> [[AWEKAS]] >> # This section is for configuring posts to AWEKAS. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a username and password. >> enable = true >> username = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[CWOP]] >> # This section is for configuring posts to CWOP. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify the station ID (e.g., CW1234). >> enable = true >> station = XXX obfuscated by wee_debug XXX >> passcode = 19683 >> post_interval = 300 >> log_success = True >> log_failure = True >> server_list = rotate.aprs.net:14580, rotate.aprs2.net:14580, >> cwop.aprs.net:14580, cwop.aprs.net:23 >> # station = EW8606 >> # If this is an APRS (radio amateur) station, uncomment >> # the following and replace with a passcode (e.g., 12345). >> # passcode = -1 >> >> >> [[PWSweather]] >> # This section is for configuring posts to PWSweather.com. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> enable = true >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[WOW]] >> # This section is for configuring posts to WOW. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> enable = true >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[Wunderground]] >> # This section is for configuring posts to the Weather >> Underground. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station (e.g., 'KORHOODR3') and password. >> enable = true >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> # Set the following to True to have weewx use the WU "Rapidfire" >> # protocol. Not all hardware can support it. See the User's Guide. >> rapidfire = false >> >> [[WeatherCloud]] >> id = XXX obfuscated by wee_debug XXX >> key = XXX obfuscated by wee_debug XXX >> >> ############################################################ >> ################## >> >> # This section specifies what reports, using which skins, to generate. >> >> [StdReport] >> >> # Where the skins reside, relative to WEEWX_ROOT >> SKIN_ROOT = skins >> >> # Where the generated reports should go, relative to WEEWX_ROOT >> HTML_ROOT = public_html >> >> # The database binding indicates which data should be used in reports. >> data_binding = wx_binding >> >> # Each of the following subsections defines a report that will be run. >> >> [[StandardReport]] >> # See the customizing guide to change the units, plot types and >> line >> # colors, modify the fonts, display additional sensor data, and >> other >> # customizations. Many of those changes can be made here by >> overriding >> # parameters, or by modifying templates within the skin itself. >> >> # The StandardReport uses the 'Standard' skin, which contains the >> # images, templates and plots for the report. >> skin = Standard >> [[[Units]]] >> [[[[Groups]]]] >> group_altitude = meter >> group_speed2 = km_per_hour2 >> group_pressure = mbar >> group_rain = mm >> group_rainrate = mm_per_hour >> group_temperature = degree_C >> group_degree_day = degree_C_day >> group_speed = km_per_hour >> >> [[FTP]] >> # FTP'ing the results to a webserver is treated as just another >> report, >> # albeit one with an unusual report generator! >> skin = Ftp >> >> # If you wish to use FTP, uncomment and fill out the next four >> lines. >> #user = replace with the ftp username >> #password = replace with the ftp password >> #server = replace with the ftp server name, e.g, >> www.threefools.org >> #path = replace with the ftp destination directory (e.g., >> /weather) >> >> # Set to True for an FTP over TLS (FTPS) connection. Not all >> servers >> # support this. >> secure_ftp = False >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Most FTP servers use port 21 >> port = 21 >> >> # Set to 1 to use passive mode, zero for active mode >> passive = 1 >> >> # Set to True for a secure FTP (SFTP) connection. Not all servers >> # support this. >> #secure_ftp = True >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /home/weewx/public_html >> >> # Most FTP servers use port 21 >> #port = 21 >> >> # Set to 1 to use passive mode, zero for active mode >> #passive = 1 >> >> # If you wish to use FTP, uncomment and fill out the next four lines. >> >> >> [[RSYNC]] >> # rsync'ing to a webserver is treated as just another report >> skin = Rsync >> >> # Rsync can be configured to remove files from the remote server >> if >> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >> you >> # make a mistake in the remote path, you could could >> unintentionally >> # cause unrelated files to be deleted. Set to 1 to enable remote >> file >> # deletion, zero to allow files to accumulate remotely. >> delete = 0 >> >> # If you wish to use rsync, you must configure passwordless ssh >> using >> # public/private key authentication from the user account that >> weewx >> # runs as to the user account on the remote machine where the >> files >> # will be copied. >> # >> # The following three lines determine where files will be sent. >> server = ve1dx.net >> path = public_html >> user = XXX obfuscated by wee_debug XXX >> >> ############################################################ >> ################## >> >> # This service acts as a filter, converting the unit system coming from >> # the hardware to a unit system in the database. >> >> [StdConvert] >> >> # The target_unit affects only the unit system in the database. Once >> # chosen it cannot be changed without converting the entire database. >> # Modification of target_unit after starting weewx will result in >> # corrupt data - the database will contain a mix of US and METRIC >> data. >> # >> # The value of target_unit does not affect the unit system for >> # reporting - reports can display US, Metric, or any combination of >> units. >> # >> # In most cases, target_unit should be left as the default: US >> # >> # In particular, those migrating from a standard wview installation >> # should use US since that is what the wview database contains. >> >> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >> target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC' >> >> ############################################################ >> ################## >> >> # This section can adjust data using calibration expressions. >> >> [StdCalibrate] >> >> [[Corrections]] >> # For each type, an arbitrary calibration expression can be >> given. >> # It should be in the units defined in the StdConvert section. >> # Example: >> foo = foo + 0.2 >> >> ############################################################ >> ################## >> >> # This section is for quality control checks. If units are not >> specified, >> # values must be in the units defined in the StdConvert section. >> >> [StdQC] >> >> [[MinMax]] >> barometer = 26, 32.5, inHg >> outTemp = -40, 120, degree_F >> inTemp = 10, 120, degree_F >> outHumidity = 0, 100 >> inHumidity = 0, 100 >> windSpeed = 0, 120, mile_per_hour >> pressure = 24, 34.5, inHg >> >> ############################################################ >> ################## >> >> # This section controls the origin of derived values. >> >> [StdWXCalculate] >> [[Calculations]] >> # Derived quantities are calculated by this service. Possible >> values are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> barometer = prefer_hardware >> altimeter = prefer_hardware >> windchill = software >> heatindex = prefer_hardware >> dewpoint = prefer_hardware >> inDewpoint = prefer_hardware >> rainRate = prefer_hardware >> >> ############################################################ >> ################## >> >> # For hardware that supports it, this section controls how often the >> # onboard clock gets updated. >> >> [StdTimeSynch] >> >> # How often to check the weather station clock for drift (in seconds) >> clock_check = 14400 >> >> # How much it can drift before we will correct it (in seconds) >> max_drift = 2 >> >> ############################################################ >> ################## >> >> # This section is for configuring the archive service. >> >> [StdArchive] >> >> # If the station hardware supports data logging then the archive >> interval >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> archive_interval = 300 >> >> >> # How long to wait (in seconds) before processing new archive data. >> Must >> # be greater than zero. >> archive_delay = 15 >> >> # If possible, new archive records are downloaded from the station >> # hardware. If the hardware does not support this, then new archive >> # records will be generated in software. >> # Set the following to "software" to force software record generation. >> record_generation = hardware >> >> # Whether to include LOOP data in hi/low statistics >> loop_hilo = True >> >> # The data binding used to save archive records >> data_binding = wx_binding >> >> ############################################################ >> ################## >> >> # This section binds a data store to a database. >> >> [DataBindings] >> >> [[wx_binding]] >> # The database must match one of the sections in [Databases]. >> # This is likely to be the only option you would want to change. >> database = archive_sqlite >> # The name of the table within the database >> table_name = archive >> # The manager handles aggregation of data for historical summaries >> manager = weewx.wxmanager.WXDaySummaryManager >> # The schema defines the structure of the database. >> # It is *only* used when the database is created. >> schema = schemas.wview.schema >> >> ############################################################ >> ################## >> >> # This section defines various databases. >> >> [Databases] >> >> # A SQLite database is simply a single file >> [[archive_sqlite]] >> database_type = SQLite >> database_name = weewx.sdb >> >> # MySQL >> [[archive_mysql]] >> database_type = MySQL >> database_name = weewx >> >> ############################################################ >> ################## >> >> # This section defines defaults for the different types of databases. >> >> [DatabaseTypes] >> >> # Defaults for SQLite databases >> [[SQLite]] >> driver = weedb.sqlite >> # Directory in which the database files are located >> SQLITE_ROOT = /home/weewx/archive >> >> # Defaults for MySQL databases >> [[MySQL]] >> driver = weedb.mysql >> # The host where the database is located >> host = localhost >> # The user name for logging in to the host >> user = XXX obfuscated by wee_debug XXX >> # The password for the user name >> password = XXX obfuscated by wee_debug XXX >> >> ############################################################ >> ################## >> >> # This section configures the internal weewx engine. >> >> [Engine] >> >> [[Services]] >> # This section specifies the services that should be run. They are >> # grouped by type, and the order of services within each group >> # determines the order in which the services will be run. >> prep_services = weewx.engine.StdTimeSynch >> data_services = , >> process_services = weewx.engine.StdConvert, >> weewx.engine.StdCalibrate, weewx.engine.StdQC, >> weewx.wxservices.StdWXCalculate >> archive_services = weewx.engine.StdArchive >> restful_services = weewx.restx.StdStationRegistry, >> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, >> user.wcloud.WeatherCloud >> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >> >> ############################################################ >> ################## >> [Alarm] >> time_wait = 3600 >> count_threshold = 25 >> >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
