That fixed it. No errors on startup and I see Wunderground updating
every few seconds as it did with 3.6.2. Thanks for the help.
- Paul
Mar 13 20:34:51 norge weewx[17569]: engine: Initializing weewx version 3.7.0
Mar 13 20:34:51 norge weewx[17569]: engine: Using Python 2.7.5 (default,
Nov 6 2016, 00:28:07)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-11)]
Mar 13 20:34:51 norge weewx[17569]: engine: Platform
Linux-3.10.0-514.10.2.el7.x86_64-x86_64-with-centos-7.3.1611-Core
Mar 13 20:34:51 norge weewx[17569]: engine: Locale is 'en_CA.UTF-8'
Mar 13 20:34:51 norge weewx[17569]: engine: pid file is /var/run/weewx.pid
Mar 13 20:34:51 norge weewx[17574]: engine: Using configuration file
/etc/weewx/weewx.conf
Mar 13 20:34:51 norge weewx[17574]: engine: Loading station type Vantage
(weewx.drivers.vantage)
Mar 13 20:34:51 norge weewx[17564]: Starting weewx: [ OK ]
Mar 13 20:34:51 norge polkitd[834]: Unregistered Authentication Agent for
unix-process:17558:68408625 (system bus name :1.21176, object path
/org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_CA.UTF-8)
(disconnected from bus)
Mar 13 20:34:51 norge weewx[17574]: engine: StdConvert target unit is 0x10
Mar 13 20:34:51 norge weewx[17574]: wxcalculate: The following values will
be calculated: barometer=prefer_hardware, windchill=software,
dewpoint=prefer_hardware, appTemp=prefer_hardware,
rainRate=prefer_hardware, windrun=prefer_hardware,
heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Mar 13 20:34:51 norge weewx[17574]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Mar 13 20:34:51 norge weewx[17574]: engine: Archive will use data binding
wx_binding
Mar 13 20:34:51 norge weewx[17574]: engine: Record generation will be
attempted in 'hardware'
Mar 13 20:34:51 norge weewx[17574]: engine: Using archive interval of 300
seconds (specified by hardware)
Mar 13 20:34:51 norge weewx[17574]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Mar 13 20:34:51 norge weewx[17574]: manager: Starting backfill of daily
summaries
Mar 13 20:34:51 norge weewx[17574]: restx: StationRegistry: Station will be
registered.
Mar 13 20:34:51 norge weewx[17574]: restx: Wunderground-RF: Data for
station INOVASCO212 will be posted
Mar 13 20:34:51 norge weewx[17574]: restx: PWSWeather: Data for station
LakeEcho01 will be posted
Mar 13 20:34:51 norge weewx[17574]: restx: CWOP: Data for station VE1DX
will be posted
Mar 13 20:34:51 norge weewx[17574]: restx: WOW: Data for station 953456001
will be posted
Mar 13 20:34:51 norge weewx[17574]: restx: AWEKAS: Data will be uploaded
for user VE1DX
Mar 13 20:34:51 norge weewx[17574]: restx: WeatherCloud: service version is
0.10
Mar 13 20:34:51 norge weewx[17574]: restx: WeatherCloud: Data will be
uploaded for id=3563c30a5fb9c1d6
Mar 13 20:34:51 norge weewx[17574]: engine: Starting up weewx version 3.7.0
Mar 13 20:34:51 norge weewx[17574]: engine: Clock error is 0.68 seconds
(positive is fast)
Mar 13 20:34:51 norge weewx[17574]: engine: Starting main packet loop.
Mar 13 20:35:16 norge weewx[17574]: manager: Added record 2017-03-13
20:35:00 ADT (1489448100) to database 'weewx.sdb'
Mar 13 20:35:16 norge weewx[17574]: manager: Added record 2017-03-13
20:35:00 ADT (1489448100) to daily summary in 'weewx.sdb'
Mar 13 20:35:16 norge weewx[17574]: restx: PWSWeather: Published record
2017-03-13 20:35:00 ADT (1489448100)
Mar 13 20:35:16 norge weewx[17574]: cheetahgenerator: Generated 14 files
for report StandardReport in 0.46 seconds
Mar 13 20:35:16 norge weewx[17574]: restx: CWOP: Published record
2017-03-13 20:35:00 ADT (1489448100)
Mar 13 20:35:16 norge weewx[17574]: restx: AWEKAS: Published record
2017-03-13 20:35:00 ADT (1489448100)
Mar 13 20:35:16 norge weewx[17574]: imagegenerator: Generated 12 images for
StandardReport in 0.08 seconds
Mar 13 20:35:16 norge weewx[17574]: copygenerator: copied 9 files to
/home/weewx/public_html
Mar 13 20:35:17 norge weewx[17574]: restx: WeatherCloud: Published record
2017-03-13 20:35:00 ADT (1489448100)
Mar 13 20:35:17 norge weewx[17574]: restx: WOW: Published record 2017-03-13
20:35:00 ADT (1489448100)
Mar 13 20:35:19 norge weewx[17574]: rsyncupload: rsync'd 36 files (167396
bytes) in 2.28 seconds
Mar 13 20:35:25 norge weewx[17574]: restx: StationRegistry: Published
record 2017-03-13 20:35:00 ADT (1489448100)
On Monday, March 13, 2017 at 11:12:38 AM UTC-3, WindnFog wrote:
>
> Good day, gentlemen,
>
> I just upgraded to 3.7.0. It is working well with the exception of
> rapidfire to Wunderground. It works with Wunderground using the
> station/password, just seems to kill the Wunderground-RF thread on start up:
>
>
> Mar 13 10:08:43 norge weewx[3814]: engine: Initializing weewx version 3.7.0
> Mar 13 10:08:43 norge weewx[3814]: engine: Using Python 2.7.5 (default,
> Nov 6 2016, 00:28:07)
> [GCC 4.8.5 20150623 (Red Hat 4.8.5-11)]
> Mar 13 10:08:43 norge weewx[3814]: engine: Platform
> Linux-3.10.0-514.10.2.el7.x86_64-x86_64-with-centos-7.3.1611-Core
> Mar 13 10:08:43 norge weewx[3814]: engine: Locale is 'en_CA.UTF-8'
> Mar 13 10:08:43 norge weewx[3814]: engine: pid file is /var/run/weewx.pid
> Mar 13 10:08:43 norge weewx[3819]: engine: Using configuration file
> /etc/weewx/weewx.conf
> Mar 13 10:08:43 norge weewx[3819]: engine: Loading station type Vantage
> (weewx.drivers.vantage)
> Mar 13 10:08:43 norge weewx[3809]: Starting weewx: [ OK ]
> Mar 13 10:08:43 norge polkitd[834]: Unregistered Authentication Agent for
> unix-process:3803:64651857 (system bus name :1.19408, object path
> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_CA.UTF-8)
> (disconnected from bus)
> Mar 13 10:08:43 norge weewx[3819]: engine: StdConvert target unit is 0x10
> Mar 13 10:08:43 norge weewx[3819]: wxcalculate: The following values will
> be calculated: barometer=prefer_hardware, windchill=software,
> dewpoint=prefer_hardware, appTemp=prefer_hardware,
> rainRate=prefer_hardware, windrun=prefer_hardware,
> heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
> humidex=prefer_hardware, pressure=prefer_hardware,
> inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
> cloudbase=prefer_hardware
> Mar 13 10:08:43 norge weewx[3819]: wxcalculate: The following algorithms
> will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
> Mar 13 10:08:43 norge weewx[3819]: engine: Archive will use data binding
> wx_binding
> Mar 13 10:08:43 norge weewx[3819]: engine: Record generation will be
> attempted in 'hardware'
> Mar 13 10:08:43 norge weewx[3819]: engine: Using archive interval of 300
> seconds (specified by hardware)
> Mar 13 10:08:43 norge weewx[3819]: engine: Using binding 'wx_binding' to
> database 'weewx.sdb'
> Mar 13 10:08:43 norge weewx[3819]: manager: Starting backfill of daily
> summaries
> Mar 13 10:08:43 norge weewx[3819]: restx: StationRegistry: Station will be
> registered.
> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Data for
> station INOVASCO212 will be posted
> Mar 13 10:08:43 norge weewx[3819]: restx: PWSWeather: Data for station
> LakeEcho01 will be posted
> Mar 13 10:08:43 norge weewx[3819]: restx: CWOP: Data for station VE1DX
> will be posted
> Mar 13 10:08:43 norge weewx[3819]: restx: WOW: Data for station 953456001
> will be posted
> Mar 13 10:08:43 norge weewx[3819]: restx: AWEKAS: Data will be uploaded
> for user VE1DX
> Mar 13 10:08:43 norge weewx[3819]: restx: WeatherCloud: service version is
> 0.10
> Mar 13 10:08:43 norge weewx[3819]: restx: WeatherCloud: Data will be
> uploaded for id=3563c30a5fb9c1d6
> Mar 13 10:08:43 norge weewx[3819]: engine: Starting up weewx version 3.7.0
> Mar 13 10:08:43 norge weewx[3819]: engine: Clock error is 0.37 seconds
> (positive is fast)
> Mar 13 10:08:43 norge weewx[3819]: engine: Starting main packet loop.
> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Unexpected
> exception of type <type 'exceptions.ValueError'>
> Mar 13 10:08:43 norge weewx[3819]: restx: Wunderground-RF: Thread exiting.
> Reason: Inconsistent units (16 vs 16 vs 1) when querying for hourRain
>
>
> If I disable rapidfire in the Wunderground section of
> /etc/weewx/weewx.conf it stops this, but I'm looking for a suggestion as to
> where to look to resolve thehourRain inconsistency. I may have missed
> something in the list of upgrade notes.
> I didn't change the length of your archive interval, nor do I intend to.
> I don't think the interval bug on weighting applies to me, does it?
>
> I don't see anything in the change log that applies to this, either.
> I'd like to use rapidfire with Wunderground again . . . I'm sure it's
> something simple I missed.
>
> Here is my weewx.debug (with the Wunderground rapidfire temporarily
> set to false):
>
> Using configuration file /etc/weewx/weewx.conf
> Using database binding 'wx_binding', which is bound to database
> 'archive_sqlite'
>
> System info
> cpu cores: 4
> bogomips: 7996.10
> core id: 3
> apicid: 7
> fpu_exception: yes
> stepping: 3
> cache_alignment: 64
> clflush size: 64
> microcode: 0x20
> cache size: 8192 KB
> cpuid level: 13
> fpu: yes
> model name: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
> siblings: 8
> physical id: 0
> address sizes: 39 bits physical, 48 bits virtual
> cpu family: 6
> vendor_id: GenuineIntel
> wp: yes
> power management:
> flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
> syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good
> nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor
> ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe
> popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat
> epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase
> tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
> cpu MHz: 2822.968
> model: 60
> processor: 7
> initial apicid: 7
>
> Operating system: CentOS Linux 7.3.1611 Core
> Linux norge 3.10.0-514.10.2.el7.x86_64 #1 SMP
> Fri Mar 3 00:04:05 UTC 2017 x86_64
> 1 minute load average: 0.01
> 5 minute load average: 0.04
> 15 minute load average: 0.05
>
> General weewx info
> Weewx version 3.7.0 detected.
>
> Station info
> Station type: Vantage
> Driver: weewx.drivers.vantage
>
> Driver info
> [Vantage]
> # This section is for the Davis Vantage series of weather stations.
>
> # Connection type: serial or ethernet
> # serial (the classic VantagePro)
> # ethernet (the WeatherLinkIP)
> type = serial
>
> # If the connection type is serial, a port must be specified:
> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
> # /dev/ttyUSB0 is a common USB port name
> # /dev/ttyS0 is a common serial port name
> # BSD:
> # /dev/cuaU0 is a common serial port name
> port = /dev/ttyUSB0
>
> # If the connection type is ethernet, an IP Address/hostname is
> required:
> host = 1.2.3.4
>
> ######################################################
> # The rest of this section rarely needs any attention.
> # You can safely leave it "as is."
> ######################################################
>
> # Serial baud rate (usually 19200)
> baudrate = 19200
>
> # TCP port (when using the WeatherLinkIP)
> tcp_port = 22222
>
> # TCP send delay (when using the WeatherLinkIP):
> tcp_send_delay = 1
>
> # The id of your ISS station (usually 1)
> iss_id = 1
>
> # How long to wait for a response from the station before giving up (in
> # seconds; must be greater than 2)
> timeout = 5
>
> # How long to wait before trying again (in seconds)
> wait_before_retry = 1.2
>
> # How many times to try before giving up:
> max_tries = 4
>
> # The driver to use:
> driver = weewx.drivers.vantage
>
> Currently installed extensions
> Extension Name Version Description
> wcloud 0.10 Upload weather data to WeatherCloud.
>
> Archive info
> Database name: weewx.sdb
> Table name: archive
> Unit system: 16 (METRIC)
> First good timestamp: 2015-09-27 20:06:00 ADT (1443395160)
> Last good timestamp: 2017-03-13 10:55:00 ADT (1489413300)
> Number of records: 156379
> weewx (weewx.conf) is set to use an archive interval of 300 seconds.
> The station hardware was not interrogated in determining archive
> interval.
>
> Databases configured in weewx.conf
> Database name: weewx.sdb
> Database driver: weedb.sqlite
>
> Database name: weewx
> Database driver: weedb.mysql
> Database host: localhost
>
>
> Parsed and obfuscated weewx.conf
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2015 Tom Keffer <[email protected]>
> # See the file LICENSE.txt for your rights.
>
>
> ##############################################################################
>
> # This section is for general configuration information.
>
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 0
>
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /home/weewx
>
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
>
> # Do not modify this. It is used when installing and updating weewx.
> version = 3.7.0
>
>
> ##############################################################################
>
> # This section is for information about the station.
>
> [Station]
>
> # Description of the station location
> location = "Lake Echo, Nova Scotia"
>
> # Latitude and longitude in decimal degrees
> latitude = 44.73794
> longitude = -63.37766
>
> # Altitude of the station, with unit it is in. This is downloaded from
> # from the station if the hardware supports it.
> altitude = 29, meter # Choose 'foot' or 'meter' for unit
>
> # Set to type of station hardware. There must be a corresponding stanza
> # in this file with a 'driver' parameter indicating the driver to be
> used.
> station_type = Vantage
>
> # The start of the rain year (1=January; 10=October, etc.). This is
> # downloaded from the station if the hardware supports it.
> rain_year_start = 1
>
> # Start of week (0=Monday, 6=Sunday)
> week_start = 6
>
> # If you have a website, you may specify a URL
> station_url = XXX obfuscated by wee_debug XXX
>
>
> ##############################################################################
>
> [Simulator]
> # This section is for the weewx weather station simulator
>
> # The time (in seconds) between LOOP packets.
> loop_interval = 2.5
>
> # The simulator mode can be either 'simulator' or 'generator'.
> # Real-time simulator. Sleep between each LOOP packet.
> mode = simulator
> # Generator. Emit LOOP packets as fast as possible (useful for
> testing).
> #mode = generator
>
> # The start time. If not specified, the default is to use the present
> time.
> #start = 2011-01-01 00:00
>
> # The driver to use:
> driver = weewx.drivers.simulator
>
>
>
> ##############################################################################
>
> [Vantage]
> # This section is for the Davis Vantage series of weather stations.
>
> # Connection type: serial or ethernet
> # serial (the classic VantagePro)
> # ethernet (the WeatherLinkIP)
> type = serial
>
> # If the connection type is serial, a port must be specified:
> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
> # /dev/ttyUSB0 is a common USB port name
> # /dev/ttyS0 is a common serial port name
> # BSD:
> # /dev/cuaU0 is a common serial port name
> port = /dev/ttyUSB0
>
> # If the connection type is ethernet, an IP Address/hostname is
> required:
> host = 1.2.3.4
>
> ######################################################
> # The rest of this section rarely needs any attention.
> # You can safely leave it "as is."
> ######################################################
>
> # Serial baud rate (usually 19200)
> baudrate = 19200
>
> # TCP port (when using the WeatherLinkIP)
> tcp_port = 22222
>
> # TCP send delay (when using the WeatherLinkIP):
> tcp_send_delay = 1
>
> # The id of your ISS station (usually 1)
> iss_id = 1
>
> # How long to wait for a response from the station before giving up (in
> # seconds; must be greater than 2)
> timeout = 5
>
> # How long to wait before trying again (in seconds)
> wait_before_retry = 1.2
>
> # How many times to try before giving up:
> max_tries = 4
>
> # The driver to use:
> driver = weewx.drivers.vantage
>
>
> ##############################################################################
>
> # This section is for uploading data to Internet sites
>
> [StdRESTful]
>
> [[StationRegistry]]
> # To register this weather station with weewx, set this to true
> register_this_station = true
> station_url = XXX obfuscated by wee_debug XXX
>
> [[AWEKAS]]
> # This section is for configuring posts to AWEKAS.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a username and password.
> enable = true
> username = XXX obfuscated by wee_debug XXX
> password = XXX obfuscated by wee_debug XXX
>
> [[CWOP]]
> # This section is for configuring posts to CWOP.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify the station ID (e.g., CW1234).
> enable = true
> station = XXX obfuscated by wee_debug XXX
> passcode = 19683
> post_interval = 300
> log_success = True
> log_failure = True
> server_list = rotate.aprs.net:14580 - private
> <http://rotate.aprs.net:14580>, rotate.aprs2.net:14580 - private
> <http://rotate.aprs2.net:14580>, cwop.aprs.net:14580 - private
> <http://cwop.aprs.net:14580>, cwop.aprs.net:23 - private
> <http://cwop.aprs.net:23>
> # station = EW8606
> # If this is an APRS (radio amateur) station, uncomment
> # the following and replace with a passcode (e.g., 12345).
> # passcode = -1
>
>
> [[PWSweather]]
> # This section is for configuring posts to PWSweather.com.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station and password.
> enable = true
> station = XXX obfuscated by wee_debug XXX
> password = XXX obfuscated by wee_debug XXX
>
> [[WOW]]
> # This section is for configuring posts to WOW.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station and password.
> enable = true
> station = XXX obfuscated by wee_debug XXX
> password = XXX obfuscated by wee_debug XXX
>
> [[Wunderground]]
> # This section is for configuring posts to the Weather Underground.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station (e.g., 'KORHOODR3') and password.
> enable = true
> station = XXX obfuscated by wee_debug XXX
> password = XXX obfuscated by wee_debug XXX
>
> # Set the following to True to have weewx use the WU "Rapidfire"
> # protocol. Not all hardware can support it. See the User's Guide.
> rapidfire = false
>
> [[WeatherCloud]]
> id = XXX obfuscated by wee_debug XXX
> key = XXX obfuscated by wee_debug XXX
>
>
> ##############################################################################
>
> # This section specifies what reports, using which skins, to generate.
>
> [StdReport]
>
> # Where the skins reside, relative to WEEWX_ROOT
> SKIN_ROOT = skins
>
> # Where the generated reports should go, relative to WEEWX_ROOT
> HTML_ROOT = public_html
>
> # The database binding indicates which data should be used in reports.
> data_binding = wx_binding
>
> # Each of the following subsections defines a report that will be run.
>
> [[StandardReport]]
> # See the customizing guide to change the units, plot types and
> line
> # colors, modify the fonts, display additional sensor data, and
> other
> # customizations. Many of those changes can be made here by
> overriding
> # parameters, or by modifying templates within the skin itself.
>
> # The StandardReport uses the 'Standard' skin, which contains the
> # images, templates and plots for the report.
> skin = Standard
> [[[Units]]]
> [[[[Groups]]]]
> group_altitude = meter
> group_speed2 = km_per_hour2
> group_pressure = mbar
> group_rain = mm
> group_rainrate = mm_per_hour
> group_temperature = degree_C
> group_degree_day = degree_C_day
> group_speed = km_per_hour
>
> [[FTP]]
> # FTP'ing the results to a webserver is treated as just another
> report,
> # albeit one with an unusual report generator!
> skin = Ftp
>
> # If you wish to use FTP, uncomment and fill out the next four
> lines.
> #user = replace with the ftp username
> #password = replace with the ftp password
> #server = replace with the ftp server name, e.g,
> www.threefools.org - private <http://www.threefools.org>
> #path = replace with the ftp destination directory (e.g., /weather)
>
> # Set to True for an FTP over TLS (FTPS) connection. Not all
> servers
> # support this.
> secure_ftp = False
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = /var/www/html/weewx
>
> # Most FTP servers use port 21
> port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> passive = 1
>
> # Set to True for a secure FTP (SFTP) connection. Not all servers
> # support this.
> #secure_ftp = True
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = /home/weewx/public_html
>
> # Most FTP servers use port 21
> #port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> #passive = 1
>
> # If you wish to use FTP, uncomment and fill out the next four lines.
>
>
> [[RSYNC]]
> # rsync'ing to a webserver is treated as just another report
> skin = Rsync
>
> # Rsync can be configured to remove files from the remote server if
> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
> you
> # make a mistake in the remote path, you could could
> unintentionally
> # cause unrelated files to be deleted. Set to 1 to enable remote
> file
> # deletion, zero to allow files to accumulate remotely.
> delete = 0
>
> # If you wish to use rsync, you must configure passwordless ssh
> using
> # public/private key authentication from the user account that
> weewx
> # runs as to the user account on the remote machine where the files
> # will be copied.
> #
> # The following three lines determine where files will be sent.
> server = ve1dx.net - private <http://ve1dx.net>
> path = public_html
> user = XXX obfuscated by wee_debug XXX
>
>
> ##############################################################################
>
> # This service acts as a filter, converting the unit system coming from
> # the hardware to a unit system in the database.
>
> [StdConvert]
>
> # The target_unit affects only the unit system in the database. Once
> # chosen it cannot be changed without converting the entire database.
> # Modification of target_unit after starting weewx will result in
> # corrupt data - the database will contain a mix of US and METRIC data.
> #
> # The value of target_unit does not affect the unit system for
> # reporting - reports can display US, Metric, or any combination of
> units.
> #
> # In most cases, target_unit should be left as the default: US
> #
> # In particular, those migrating from a standard wview installation
> # should use US since that is what the wview database contains.
>
> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
> target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'
>
>
> ##############################################################################
>
> # This section can adjust data using calibration expressions.
>
> [StdCalibrate]
>
> [[Corrections]]
> # For each type, an arbitrary calibration expression can be given.
> # It should be in the units defined in the StdConvert section.
> # Example:
> foo = foo + 0.2
>
>
> ##############################################################################
>
> # This section is for quality control checks. If units are not specified,
> # values must be in the units defined in the StdConvert section.
>
> [StdQC]
>
> [[MinMax]]
> barometer = 26, 32.5, inHg
> outTemp = -40, 120, degree_F
> inTemp = 10, 120, degree_F
> outHumidity = 0, 100
> inHumidity = 0, 100
> windSpeed = 0, 120, mile_per_hour
> pressure = 24, 34.5, inHg
>
>
> ##############################################################################
>
> # This section controls the origin of derived values.
>
> [StdWXCalculate]
> [[Calculations]]
> # Derived quantities are calculated by this service. Possible
> values are:
> # hardware - use the value provided by hardware
> # software - use the value calculated by weewx
> # prefer_hardware - use value provide by hardware if available,
> # otherwise use value calculated by weewx
>
> pressure = prefer_hardware
> barometer = prefer_hardware
> altimeter = prefer_hardware
> windchill = software
> heatindex = prefer_hardware
> dewpoint = prefer_hardware
> inDewpoint = prefer_hardware
> rainRate = prefer_hardware
>
>
> ##############################################################################
>
> # For hardware that supports it, this section controls how often the
> # onboard clock gets updated.
>
> [StdTimeSynch]
>
> # How often to check the weather station clock for drift (in seconds)
> clock_check = 14400
>
> # How much it can drift before we will correct it (in seconds)
> max_drift = 2
>
>
> ##############################################################################
>
> # This section is for configuring the archive service.
>
> [StdArchive]
>
> # If the station hardware supports data logging then the archive
> interval
> # will be downloaded from the station. Otherwise, specify it (in
> seconds).
> archive_interval = 300
>
>
> # How long to wait (in seconds) before processing new archive data.
> Must
> # be greater than zero.
> archive_delay = 15
>
> # If possible, new archive records are downloaded from the station
> # hardware. If the hardware does not support this, then new archive
> # records will be generated in software.
> # Set the following to "software" to force software record generation.
> record_generation = hardware
>
> # Whether to include LOOP data in hi/low statistics
> loop_hilo = True
>
> # The data binding used to save archive records
> data_binding = wx_binding
>
>
> ##############################################################################
>
> # This section binds a data store to a database.
>
> [DataBindings]
>
> [[wx_binding]]
> # The database must match one of the sections in [Databases].
> # This is likely to be the only option you would want to change.
> database = archive_sqlite
> # The name of the table within the database
> table_name = archive
> # The manager handles aggregation of data for historical summaries
> manager = weewx.wxmanager.WXDaySummaryManager
> # The schema defines the structure of the database.
> # It is *only* used when the database is created.
> schema = schemas.wview.schema
>
>
> ##############################################################################
>
> # This section defines various databases.
>
> [Databases]
>
> # A SQLite database is simply a single file
> [[archive_sqlite]]
> database_type = SQLite
> database_name = weewx.sdb
>
> # MySQL
> [[archive_mysql]]
> database_type = MySQL
> database_name = weewx
>
>
> ##############################################################################
>
> # This section defines defaults for the different types of databases.
>
> [DatabaseTypes]
>
> # Defaults for SQLite databases
> [[SQLite]]
> driver = weedb.sqlite
> # Directory in which the database files are located
> SQLITE_ROOT = /home/weewx/archive
>
> # Defaults for MySQL databases
> [[MySQL]]
> driver = weedb.mysql
> # The host where the database is located
> host = localhost
> # The user name for logging in to the host
> user = XXX obfuscated by wee_debug XXX
> # The password for the user name
> password = XXX obfuscated by wee_debug XXX
>
>
> ##############################################################################
>
> # This section configures the internal weewx engine.
>
> [Engine]
>
> [[Services]]
> # This section specifies the services that should be run. They are
> # grouped by type, and the order of services within each group
> # determines the order in which the services will be run.
> prep_services = weewx.engine.StdTimeSynch
> data_services = ,
> process_services = weewx.engine.StdConvert,
> weewx.engine.StdCalibrate, weewx.engine.StdQC,
> weewx.wxservices.StdWXCalculate
> archive_services = weewx.engine.StdArchive
> restful_services = weewx.restx.StdStationRegistry,
> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS,
> user.wcloud.WeatherCloud
> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>
>
> ##############################################################################
> [Alarm]
> time_wait = 3600
> count_threshold = 25
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
