Line 73 says realTimeUrlWeewx : 'gauge-data.txt', On Tuesday, March 14, 2017 at 10:50:46 PM UTC-4, gjr80 wrote: > > Hi, > > I see nothing obviously wrong there. It's possible that the SteelSeries > Weather Gauges can't find you data file (gauge-data.txt), what do you > have against realTimeURL_weewx in gauges.js (it about line 68). This > tells the Steel Series Weatehr Gauges where to find you gauge-data.txt > file. > > Gary > > On Wednesday, 15 March 2017 12:33:46 UTC+10, Sam wrote: >> >> Hi, and thanks to all in advance, >> >> >> I am trying to install SteelSeries gauges to my weewx raspberry pi. >> Weewx was installed from a DEB package. It is partly working in that I see >> a web page at http://192.168.1.125/weewx/ss/ that mentions at the >> bottom....... >> >> >> Interval: 5 minutes >> Station: Simulator >> Software: WeeWX 3.7.0 <http://www.weewx.com/> >> Scripts: by Mark Crossley >> Gauges: SteelSeries <https://github.com/HanSolo/SteelSeries-Canvas> by >> Gerrit Grunwald >> >> >> But that is it. No gauges are displayed. Included are some Log files. >> >> Here is what I have done. >> >> copy weather_server/WeeWX/skin.conf WEEWX_SKINS_DIR/ss/ >> >> copy weather_server/WeeWX/index.html.tmpl WEEWX_SKINS_DIR/ss/ >> >> copy weather_server/WeeWX/gauge-data.txt.tmpl WEEWX_SKINS_DIR/ss/ >> >> copy web_server/css folder to WEEWX_SKINS_DIR/ss/ >> >> copy web_server/scripts folder to WEEWX_SKINS_DIR/ss/ >> >> edied WEEWX_SKINS_DIR/ss/scripts/gauges.js >> >> weatherProgram : 6 >> >> imgPathURL : '' >> >> stationTimeout : 10 // set to twice archive interval, in minutes >> >> showUvGauge : false // false if there is no UV sensor >> >> showSolarGauge : false // false if there is no solar radiation sensor >> >> add a SteelSeries section to StdReport in weewx.conf >> >> [StdReport] >> >> ... >> >> [[SteelSeries]] >> >> skin = ss >> >> HTML_ROOT = /var/www/html/weewx/ss >> >> >> >> >> >> >> >> wee_debug output >> >> >> >> pi@raspberrypi:~ $ wee_debug --info >> >> Using verbosity=1, displaying most info >> >> >> >> wee_debug output will be sent to stdout(console) >> >> >> >> Using configuration file /etc/weewx/weewx.conf >> >> Using database binding 'wx_binding', which is bound to database >> 'archive_sqlite' >> >> >> >> System info >> >> CPU implementer: 0x41 >> >> Features: half thumb fastmult vfp edsp neon vfpv3 tls >> vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 >> >> CPU architecture: 7 >> >> BogoMIPS: 76.80 >> >> Hardware: BCM2709 >> >> CPU revision: 4 >> >> CPU part: 0xd03 >> >> model name: ARMv7 Processor rev 4 (v7l) >> >> Serial: 000000000eccebc4 >> >> processor: 3 >> >> CPU variant: 0x0 >> >> Revision: a02082 >> >> >> >> Operating system: debian 8.0 >> >> Linux raspberrypi 4.4.50-v7+ #970 SMP Mon Feb >> 20 19:18:29 GMT 2017 armv7l >> >> 1 minute load average: 0.00 >> >> 5 minute load average: 0.03 >> >> 15 minute load average: 0.00 >> >> >> >> General weewx info >> >> Weewx version 3.7.0 detected. >> >> >> >> Station info >> >> Station type: Simulator >> >> Driver: weewx.drivers.simulator >> >> >> >> Driver info >> >> [Simulator] >> >> # This section is for the weewx weather station simulator >> >> >> >> # The time (in seconds) between LOOP packets. >> >> loop_interval = 2.5 >> >> >> >> # The simulator mode can be either 'simulator' or 'generator'. >> >> # Real-time simulator. Sleep between each LOOP packet. >> >> mode = simulator >> >> # Generator. Emit LOOP packets as fast as possible (useful for >> testing). >> >> #mode = generator >> >> >> >> # The start time. If not specified, the default is to use the present >> time. >> >> #start = 2011-01-01 00:00 >> >> >> >> # The driver to use: >> >> driver = weewx.drivers.simulator >> >> >> >> Currently installed extensions >> >> No extensions installed >> >> >> >> Archive info >> >> Database name: weewx.sdb >> >> Table name: archive >> >> Unit system: 1 (US) >> >> First good timestamp: 2017-03-13 22:35:00 EDT (1489458900) >> >> Last good timestamp: 2017-03-14 21:35:00 EDT (1489541700) >> >> Number of records: 274 >> >> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >> >> The station hardware was not interrogated in determining archive >> interval. >> >> >> >> Databases configured in weewx.conf >> >> Database name: weewx.sdb >> >> Database driver: weedb.sqlite >> >> >> >> Database name: weewx >> >> Database driver: weedb.mysql >> >> Database host: localhost >> >> >> >> >> >> Parsed and obfuscated weewx.conf >> >> # WEEWX CONFIGURATION FILE >> >> # >> >> # Copyright (c) 2009-2015 Tom Keffer <[email protected]> >> >> # See the file LICENSE.txt for your rights. >> >> >> >> >> ############################################################################## >> >> >> >> # This section is for general configuration information. >> >> >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> >> debug = 1 >> >> >> >> # Root directory of the weewx data file hierarchy for this station >> >> WEEWX_ROOT = / >> >> >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> >> socket_timeout = 20 >> >> >> >> # Do not modify this. It is used when installing and updating weewx. >> >> version = 3.7.0 >> >> >> >> >> ############################################################################## >> >> >> >> # This section is for information about the station. >> >> >> >> [Station] >> >> >> >> # Description of the station location >> >> location = Up on the Pole >> >> >> >> # Latitude and longitude in decimal degrees >> >> latitude = 43.149 >> >> longitude = -74.6863 >> >> >> >> # Altitude of the station, with unit it is in. This is downloaded from >> >> # from the station if the hardware supports it. >> >> altitude = 710, foot >> >> >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> >> # in this file with a 'driver' parameter indicating the driver to be >> used. >> >> station_type = Simulator >> >> >> >> # If you have a website, you may specify an URL >> >> #station_url = http://www.example.com >> >> >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> >> # downloaded from the station if the hardware supports it. >> >> rain_year_start = 1 >> >> >> >> # Start of week (0=Monday, 6=Sunday) >> >> week_start = 6 >> >> >> >> >> ############################################################################## >> >> >> >> [Simulator] >> >> # This section is for the weewx weather station simulator >> >> >> >> # The time (in seconds) between LOOP packets. >> >> loop_interval = 2.5 >> >> >> >> # The simulator mode can be either 'simulator' or 'generator'. >> >> # Real-time simulator. Sleep between each LOOP packet. >> >> mode = simulator >> >> # Generator. Emit LOOP packets as fast as possible (useful for >> testing). >> >> #mode = generator >> >> >> >> # The start time. If not specified, the default is to use the present >> time. >> >> #start = 2011-01-01 00:00 >> >> >> >> # The driver to use: >> >> driver = weewx.drivers.simulator >> >> >> >> >> ############################################################################## >> >> >> >> # This section is for uploading data to Internet sites >> >> >> >> [StdRESTful] >> >> >> >> [[StationRegistry]] >> >> # To register this weather station with weewx, set this to true >> >> register_this_station = false >> >> >> >> [[AWEKAS]] >> >> # This section is for configuring posts to AWEKAS. >> >> >> >> # If you wish to do this, set the option 'enable' to true, >> >> # and specify a username and password. >> >> enable = false >> >> username = XXX obfuscated by wee_debug XXX >> >> # To guard against parsing errors, put your password in quotes: >> >> password = XXX obfuscated by wee_debug XXX >> >> >> >> [[CWOP]] >> >> # This section is for configuring posts to CWOP. >> >> >> >> # If you wish to do this, set the option 'enable' to true, >> >> # and specify the station ID (e.g., CW1234). >> >> enable = false >> >> station = XXX obfuscated by wee_debug XXX >> >> >> >> # If this is an APRS (radio amateur) station, uncomment >> >> # the following and replace with a passcode (e.g., 12345). >> >> #passcode = replace_me (APRS stations only) >> >> >> >> [[PWSweather]] >> >> # This section is for configuring posts to PWSweather.com. >> >> >> >> # If you wish to do this, set the option 'enable' to true, >> >> # and specify a station and password. >> >> enable = false >> >> station = XXX obfuscated by wee_debug XXX >> >> # To guard against parsing errors, put your password in quotes: >> >> password = XXX obfuscated by wee_debug XXX >> >> >> >> [[WOW]] >> >> # This section is for configuring posts to WOW. >> >> >> >> # If you wish to do this, set the option 'enable' to true, >> >> # and specify a station and password. >> >> enable = false >> >> station = XXX obfuscated by wee_debug XXX >> >> # To guard against parsing errors, put your password in quotes: >> >> password = XXX obfuscated by wee_debug XXX >> >> >> >> [[Wunderground]] >> >> # This section is for configuring posts to the Weather >> Underground. >> >> >> >> # If you wish to do this, set the option 'enable' to true, >> >> # and specify a station (e.g., 'KORHOODR3') and password. >> >> enable = false >> >> station = XXX obfuscated by wee_debug XXX >> >> # To guard against parsing errors, put your password in quotes: >> >> password = XXX obfuscated by wee_debug XXX >> >> >> >> # Set the following to True to have weewx use the WU "Rapidfire" >> >> # protocol. Not all hardware can support it. See the User's Guide. >> >> rapidfire = False >> >> >> >> >> ############################################################################## >> >> >> >> # This section specifies what reports, using which skins, to generate. >> >> >> >> [StdReport] >> >> >> >> # Where the skins reside, relative to WEEWX_ROOT >> >> SKIN_ROOT = /etc/weewx/skins >> >> >> >> # Where the generated reports should go, relative to WEEWX_ROOT >> >> HTML_ROOT = /var/www/html/weewx >> >> >> >> # The database binding indicates which data should be used in reports. >> >> data_binding = wx_binding >> >> >> >> # Each of the following subsections defines a report that will be run. >> >> [[SteelSeries]] >> >> skin = ss >> >> HTML_ROOT = /var/www/html/weewx/ss >> >> [[StandardReport]] >> >> # See the customizing guide to change the units, plot types and >> line >> >> # colors, modify the fonts, display additional sensor data, and >> other >> >> # customizations. Many of those changes can be made here by >> overriding >> >> # parameters, or by modifying templates within the skin itself. >> >> >> >> # The StandardReport uses the 'Standard' skin, which contains the >> >> # images, templates and plots for the report. >> >> skin = Standard >> >> [[[Units]]] >> >> [[[[Groups]]]] >> >> group_altitude = foot >> >> group_speed2 = mile_per_hour2 >> >> group_pressure = inHg >> >> group_rain = inch >> >> group_rainrate = inch_per_hour >> >> group_temperature = degree_F >> >> group_degree_day = degree_F_day >> >> group_speed = mile_per_hour >> >> >> >> [[FTP]] >> >> # FTP'ing the results to a webserver is treated as just another >> report, >> >> # albeit one with an unusual report generator! >> >> skin = Ftp >> >> >> >> # If you wish to use FTP, uncomment and fill out the next four >> lines. >> >> #user = replace with the ftp username >> >> #password = replace with the ftp password; put in quotes to guard >> against parsing errors. >> >> #server = replace with the ftp server name, e.g, >> www.threefools.org >> >> #path = replace with the ftp destination directory (e.g., >> /weather) >> >> >> >> # Set to True for an FTP over TLS (FTPS) connection. Not all >> servers >> >> # support this. >> >> secure_ftp = False >> >> >> >> # To upload files from something other than what HTML_ROOT is set >> >> # to above, specify a different HTML_ROOT here. >> >> #HTML_ROOT = /var/www/html/weewx >> >> >> >> # Most FTP servers use port 21 >> >> port = 21 >> >> >> >> # Set to 1 to use passive mode, zero for active mode >> >> passive = 1 >> >> >> >> [[RSYNC]] >> >> # rsync'ing to a webserver is treated as just another report >> >> skin = Rsync >> >> >> >> # If you wish to use rsync, you must configure passwordless ssh >> using >> >> # public/private key authentication from the user account that >> weewx >> >> # runs as to the user account on the remote machine where the >> files >> >> # will be copied. >> >> # >> >> # The following three lines determine where files will be sent. >> >> #server = replace with the rsync server name, e.g, >> www.threefools.org >> >> #path = replace with the rsync destination directory (e.g., >> /weather) >> >> #user = replace with the rsync username >> >> >> >> # Rsync can be configured to remove files from the remote server >> if >> >> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >> you >> >> # make a mistake in the remote path, you could could >> unintentionally >> >> # cause unrelated files to be deleted. Set to 1 to enable remote >> file >> >> # deletion, zero to allow files to accumulate remotely. >> >> delete = 0 >> >> >> >> >> ############################################################################## >> >> >> >> # This service acts as a filter, converting the unit system coming from >> >> # the hardware to a unit system in the database. >> >> >> >> [StdConvert] >> >> >> >> # The target_unit affects only the unit system in the database. Once >> >> # chosen it cannot be changed without converting the entire database. >> >> # Modification of target_unit after starting weewx will result in >> >> # corrupt data - the database will contain a mix of US and METRIC >> data. >> >> # >> >> # The value of target_unit does not affect the unit system for >> >> # reporting - reports can display US, Metric, or any combination of >> units. >> >> # >> >> # In most cases, target_unit should be left as the default: US >> >> # >> >> # In particular, those migrating from a standard wview installation >> >> # should use US since that is what the wview database contains. >> >> >> >> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >> >> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >> >> >> >> >> ############################################################################## >> >> >> >> # This section can adjust data using calibration expressions. >> >> >> >> [StdCalibrate] >> >> >> >> [[Corrections]] >> >> # For each type, an arbitrary calibration expression can be given. >> >> # It should be in the units defined in the StdConvert section. >> >> # Example: >> >> foo = foo + 0.2 >> >> >> >> >> ############################################################################## >> >> >> >> # This section is for quality control checks. If units are not >> specified, >> >> # values must be in the units defined in the StdConvert section. >> >> >> >> [StdQC] >> >> >> >> [[MinMax]] >> >> barometer = 26, 32.5, inHg >> >> outTemp = -40, 120, degree_F >> >> inTemp = 10, 120, degree_F >> >> outHumidity = 0, 100 >> >> inHumidity = 0, 100 >> >> windSpeed = 0, 120, mile_per_hour >> >> pressure = 24, 34.5, inHg >> >> >> >> >> ############################################################################## >> >> >> >> # This section controls the origin of derived values. >> >> >> >> [StdWXCalculate] >> >> >> >> [[Calculations]] >> >> # Derived quantities are calculated by this service. Possible >> values are: >> >> # hardware - use the value provided by hardware >> >> # software - use the value calculated by weewx >> >> # prefer_hardware - use value provide by hardware if available, >> >> # otherwise use value calculated by weewx >> >> >> >> pressure = prefer_hardware >> >> barometer = prefer_hardware >> >> altimeter = prefer_hardware >> >> windchill = prefer_hardware >> >> heatindex = prefer_hardware >> >> dewpoint = prefer_hardware >> >> inDewpoint = prefer_hardware >> >> rainRate = prefer_hardware >> >> >> >> >> ############################################################################## >> >> >> >> # For hardware that supports it, this section controls how often the >> >> # onboard clock gets updated. >> >> >> >> [StdTimeSynch] >> >> >> >> # How often to check the weather station clock for drift (in seconds) >> >> clock_check = 14400 >> >> >> >> # How much it can drift before we will correct it (in seconds) >> >> max_drift = 5 >> >> >> >> >> ############################################################################## >> >> >> >> # This section is for configuring the archive service. >> >> >> >> [StdArchive] >> >> >> >> # If the station hardware supports data logging then the archive >> interval >> >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> >> archive_interval = 300 >> >> >> >> # If possible, new archive records are downloaded from the station >> >> # hardware. If the hardware does not support this, then new archive >> >> # records will be generated in software. >> >> # Set the following to "software" to force software record generation. >> >> record_generation = hardware >> >> >> >> # Whether to include LOOP data in hi/low statistics >> >> loop_hilo = True >> >> >> >> # The data binding used to save archive records >> >> data_binding = wx_binding >> >> >> >> >> ############################################################################## >> >> >> >> # This section binds a data store to a database. >> >> >> >> [DataBindings] >> >> >> >> [[wx_binding]] >> >> # The database must match one of the sections in [Databases]. >> >> # This is likely to be the only option you would want to change. >> >> database = archive_sqlite >> >> # The name of the table within the database >> >> table_name = archive >> >> # The manager handles aggregation of data for historical summaries >> >> manager = weewx.wxmanager.WXDaySummaryManager >> >> # The schema defines the structure of the database. >> >> # It is *only* used when the database is created. >> >> schema = schemas.wview.schema >> >> >> >> >> ############################################################################## >> >> >> >> # This section defines various databases. >> >> >> >> [Databases] >> >> >> >> # A SQLite database is simply a single file >> >> [[archive_sqlite]] >> >> database_type = SQLite >> >> database_name = weewx.sdb >> >> >> >> # MySQL >> >> [[archive_mysql]] >> >> database_type = MySQL >> >> database_name = weewx >> >> >> >> >> ############################################################################## >> >> >> >> # This section defines defaults for the different types of databases. >> >> >> >> [DatabaseTypes] >> >> >> >> # Defaults for SQLite databases >> >> [[SQLite]] >> >> driver = weedb.sqlite >> >> # Directory in which the database files are located >> >> SQLITE_ROOT = /var/lib/weewx >> >> >> >> # Defaults for MySQL databases >> >> [[MySQL]] >> >> driver = weedb.mysql >> >> # The host where the database is located >> >> host = localhost >> >> # The user name for logging in to the host >> >> user = XXX obfuscated by wee_debug XXX >> >> # The password for the user name. Put in quotes to guard against >> parsing errors. >> >> password = XXX obfuscated by wee_debug XXX >> >> >> >> >> ############################################################################## >> >> >> >> # This section configures the internal weewx engine. >> >> >> >> [Engine] >> >> >> >> [[Services]] >> >> # This section specifies the services that should be run. They are >> >> # grouped by type, and the order of services within each group >> >> # determines the order in which the services will be run. >> >> prep_services = weewx.engine.StdTimeSynch >> >> data_services = , >> >> process_services = weewx.engine.StdConvert, >> weewx.engine.StdCalibrate, weewx.engine.StdQC, >> weewx.wxservices.StdWXCalculate >> >> archive_services = weewx.engine.StdArchive >> >> restful_services = weewx.restx.StdStationRegistry, >> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS >> >> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >> >> >> >> wee_debug report successfully generated >> >> 2017 [try http://www.rsyslog.com/e/2007 ] >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record >> 2017-03-14 14:20:00 EDT (1489515600) to database 'weewx.sdb' >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record >> 2017-03-14 14:20:00 EDT (1489515600) to daily summary in 'weewx.sdb' >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running reports >> for latest time in the database. >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running report >> SteelSeries >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: copygenerator: copied 6 files >> to /var/www/html/weewx/ss >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search >> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] >> >> Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 14:20:16 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 >> files for report SteelSeries in 0.69 seconds >> >> Mar 14 14:20:16 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 14:20:17 raspberrypi weewx[13193]: imagegenerator: Generated 11 >> images for SteelSeries in 0.75 seconds >> >> Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Running report >> StandardReport >> >> Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Standard/skin.conf for report >> StandardReport >> >> Mar 14 14:20:17 raspberrypi weewx[13193]: cheetahgenerator: using search >> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] >> >> Mar 14 14:20:17 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 14:20:20 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 >> files for report StandardReport in 3.38 seconds >> >> Mar 14 14:20:20 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: imagegenerator: Generated 12 >> images for StandardReport in 0.71 seconds >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: copygenerator: copied 9 files >> to /var/www/html/weewx >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report FTP >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: ftpgenerator: FTP upload not >> requested. Skipped. >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report >> RSYNC >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC >> >> Mar 14 14:20:21 raspberrypi weewx[13193]: rsyncgenerator: rsync upload >> not requested. Skipped. >> >> >> >> >> >> >> >> Latest Logs >> >> >> >> 2017 [try http://www.rsyslog.com/e/2007 ] >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record >> 2017-03-14 22:20:00 EDT (1489544400) to database 'weewx.sdb' >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record >> 2017-03-14 22:20:00 EDT (1489544400) to daily summary in 'weewx.sdb' >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running reports >> for latest time in the database. >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running report >> SteelSeries >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: copygenerator: copied 0 files >> to /var/www/html/weewx/ss >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search >> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 >> files for report SteelSeries in 0.10 seconds >> >> Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 22:20:16 raspberrypi weewx[13193]: imagegenerator: Generated 11 >> images for SteelSeries in 0.78 seconds >> >> Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Running report >> StandardReport >> >> Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Standard/skin.conf for report >> StandardReport >> >> Mar 14 22:20:16 raspberrypi weewx[13193]: cheetahgenerator: using search >> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] >> >> Mar 14 22:20:16 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 22:20:17 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 >> files for report StandardReport in 1.10 seconds >> >> Mar 14 22:20:17 raspberrypi weewx[13193]: manager: Daily summary version >> is 2.0 >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: imagegenerator: Generated 12 >> images for StandardReport in 0.77 seconds >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: copygenerator: copied 0 files >> to /var/www/html/weewx >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report FTP >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: ftpgenerator: FTP upload not >> requested. Skipped. >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report >> RSYNC >> >> Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found >> configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC >> >> >> >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
