Hi Gary,
Thank you kindly for checking this out for me...
I think the thread and your response is important, as many have these 3081
weather stations...
Well, I copied your field map straight into the config file:
source = CSV
file = /home/maxg/wwimport/test4import.txt
interval = 10
qc = True
calc_missing = True
tranche = 250
UV_sensor = True
solar_sensor = True
raw_datetime_format = %d-%m-%Y %H:%M
rain = discrete
wind_direction = -360,360
# test4import.txt:
#No,Time,Interval(mi),Indoor Humidity(%),Indoor Temperature(°C),Outdoor
Humidity(%),Outdoor Temperature(°C),Absolute
Pressure(hPa),Wind(km/h),Gust(km/h),Direction,Relative
Pressure(hPa),Dewpoint(°C),Windchill(°C),Hour Rainfall(mm),24 hour
Rainfall(mm),Week Rainfall(mm),Month Rainfall(mm),Total Rainfall(mm),Wind
Level(bft),Gust Level(bft),lightmeter(lux),UV
#1,16-02-2017
09:00,10,57,28.8,64,26.2,993.1,2.5,5.0,NW,1012.0,18.9,26.2,0.0,0.0,0.0,0.9,654.0,1,1,86352.0,0
#2,16-02-2017
13:46,10,57,28.4,64,26.5,993.0,5.0,8.6,N,1010.6,19.2,26.5,0.0,0.0,0.0,0.9,654.0,1,2,148704.0,0
#3,16-02-2017
13:56,10,57,28.4,57,28.7,992.9,1.1,3.6,N,1010.5,19.4,28.7,0.0,0.0,0.0,0.9,654.0,1,1,96896.0,0
[[FieldMap]]
dateTime = Time
usUnits =
interval = Interval(mi), minute
barometer = Relative Pressure(hPa), hPa
pressure = Absolute Pressure(hPa), hPa
altimeter =
inTemp = Indoor Temperature(°C), degree_C
outTemp = Outdoor Temperature(°C), degree_C
inHumidity = Indoor Humidity(%), percent
outHumidity = Outdoor Humidity(%), percent
windSpeed = Wind(km/h), km_per_hour
windDir =
windGust = Gust(km/h), km_per_hour
windGustDir =
rainRate =
rain = Total Rainfall(mm), mm
dewpoint = Dewpoint(°C), degree_C
windchill = Windchill(°C), degree_C
heatindex =
ET =
radiation =
UV = UV, uv_index
and got the following result (failure):
wee_import --import-config=/home/maxg/wwimport/csv.conf --dry-run
Starting wee_import...
A CSV import from source file '/home/maxg/wwimport/test4import.txt' has
been requested.
Using database binding 'wx_binding', which is bound to database 'weewx.sdb'
Destination table 'archive' unit system is '0x01' (US).
Missing derived observations will be calculated.
This is a dry run, imported data will not be saved to archive.
**** Unable to parse source-to-weewx field map.
**** No mapping specified in '/home/maxg/wwimport/csv.conf' for field
'dateTime'.
**** Nothing done, exiting.
then I thought, you might be using the latest versions... so I upgraded to
3.7, and get this (success):
# [2017-03-16 11:02] maxg@rpi1b ~ $
wee_import --import-config=/home/maxg/wwimport/csv.conf --dry-run
Starting wee_import...
A CSV import from source file '/home/maxg/wwimport/test4import.txt' has
been requested.
Using database binding 'wx_binding', which is bound to database 'weewx.sdb'
Destination table 'archive' unit system is '0x01' (US).
Missing derived observations will be calculated.
This is a dry run, imported data will not be saved to archive.
Starting dry run import ...
3 records identified for import.
Records processed: 3; Unique records: 3; Last timestamp: 2017-02-16 13:56:00
AEST (1487217360)
Finished dry run import. 3 records were processed and 3 unique records
would have been imported.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
