I've been banging my head against a rock for several hours now and had this
working previously, sadly I rsynced over my working config and had to
rebuild.
Anyway, I've got 3 reporting stations and have the hardware addresses of
each, everything but windspeed and winddir is working now and I can't seem
to figure out what I'm missing.
Interceptor config looks like this currently,
[Interceptor]
driver = user.interceptor
device_type = acurite-bridge
mode = sniff
iface = eth0
pcap_filter = src 192.168.10.100 and dst port 80
[[sensor_map]]
#Outside Weather Station
outTemp = temperature.00002089.*
pressure = pressure.00002089.*
outHumidity = humidity.00002089.*
windSpeed = windspeed.0002089.*
windDir = winddir.00002089.*
rain = rain_total.00002089.*
And debug output looks like this, (mild scrub)
Mar 25 15:59:32 HOSTNAME weewx[10565]: interceptor: MainThread: raw packet:
{'dateTime.00002089.000000000000': 1490471972,
'sensor_type.00002089.000000000000': '5N1x31',
'rainfall.00002089.000000000000': None, 'sensor_id.00002089.000000000000':
'00002089', 'dateTime': 1490471972, 'bridge_id.00002089.000000000000':
'000000000000', 'rssi.00002089.000000000000': 50.0,
'winddir.00002089.000000000000': 45.0, 'usUnits.00002089.000000000000': 1,
'battery.00002089.000000000000': 0, 'pressure.00002089.000000000000':
29.96, 'windspeed.00002089.000000000000': 1.0,
'rain_total.00002089.000000000000': 0.02, 'usUnits': 1}
WeeWX v3.7.1
Latest interceptor driver
Any help, guidance, suggestions, or sarcasm are gladly accepted at this
point.
Thanks.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
