Hi Sorry, my bad (typo).
i'm using; record_generation = hardware now and this is working fine. I did the steps described in my previous post. Thanks lot for looking. Rgds Gert On Thursday, May 25, 2017 at 7:06:28 AM UTC+2, Andrew Milner wrote: > > Did you try hardware generation again?? As Gary suggested, using hardware > generation will help in any recovery situations or losses of communication > which you may encounter in the future. > > > > On Thursday, 25 May 2017 07:47:27 UTC+3, Gert Andersen wrote: > >> Hi Gary >> >> Working now with record_generation = software >> >> Thank you for a very detailed and good explanation. I did what you >> suggested, read the chapter about memory and then did the following: >> >> sudo /etc/init.d/weewx stop >> sudo wee_device --set-interval=5 >> sudo wee_device --clear-memory (maybe just taking out the batteries might >> have helped as well) >> sudo /etc/init.d/weewx start >> >> And WU/Awekas is now updated every 5 minnutes. >> >> Thanks a lot. >> >> Rgds >> Gert >> >> On Wednesday, May 24, 2017 at 7:18:01 PM UTC+2, Gert Andersen wrote: >>> >>> Hi >>> >>> I have just moved from Meteobridge to weeWX running at Raspberry PI 3. >>> I'm using the API for Meteotemplate and this part works perfect. >>> >>> My problem is WU and Awekas. weeWX is not sending updates to these 2 >>> networks. My WU station is ICAPITAL15. My station is Davis Vantage Pro2 >>> using USB. >>> >>> I have attached the syslog. >>> >>> From weeWX.conf: >>> >>> [[Wunderground]] >>> # This section is for configuring posts to the Weather >>> Underground. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a station (e.g., 'KORHOODR3') and password. >>> enable = true >>> station = ICAPITAL15 >>> # To guard against parsing errors, put your password in quotes: >>> password = "password in quotes" >>> >>> [[AWEKAS]] >>> # This section is for configuring posts to AWEKAS. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a username and password. >>> enable = true >>> username = gand >>> # To guard against parsing errors, put your password in quotes: >>> password = "password in quotes" >>> >>> I have deleted the fake-clock. >>> >>> Any hints? >>> >>> Thanks for your help. >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
