Tks Gary! For now, I'm using a fileparser driver. To write this file, I'm using a C program that I'm writting. This program reads from BMP280 and DHT22.....I'm just waiting other parts to arrive so I can build other sensors. I'm planing to read UV (just waiting AD conversor), light intensity and wind speed/rain gauge and wind direction, all from ebay and software custom-made (since sensors will be direct attached to my Raspberry Pi, no controller or commercial controller).
I'll try to evaluate my error and make some kind of formula. In the future (after all parts done), I'm planing to make my custom driver read direct from my C program instead of using text file/parser. 2017-07-05 17:21 GMT-03:00 gjr80 <[email protected]>: > Hi, > > How it works? Simple, each time weeWX receives a packet or record that > contains outTemp, weeWX replaces the outTemp value with a new value that is > equal to the original outTemp value plus 0.02 times the original outTemp > value minus 68. The new outTemp value is then used and the old outTemp > value is discarded and no longer used. > > How to apply that in your case? Well first you need to work out what > correction is needed; you gave a single point of comparison so there are an > infinite number of 'corrections' that can correct 964hPa to 1024hPa, eg > > barometer = barometer + 60 > barometer = barometer + (barometer - 364) * 0.1 > barometer = barometer + (barometer - 664) * 0.2 > > You really need to make a few more observations at different barometer > values so you can develop some sort of correction equation. > > A couple of other things, if you have a driver for your station you may > wish to incorporate your 'correction' in your driver so that the driver > emits the correct barometer value. Also, if you do persist in using a > correction in weewx.conf, be aware that the units used in the correction > formula are the units used by your database. So if your database is in US > customary units (the default) your correction formula would need to be > expressed in inHg. > > Gary > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/JqoArGy91OY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
