Sheepwalk Electronics sell an equivalent to the hobby-boards version http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=55&osCsid=2308a9eb63d5662838e334279a35f3e9
Do you supply 5v to the existing sensor? I found they behaved better with it jumpered on. I've swapped out the actual sensor (Honeywell HIH module) before with success. If you do that just make sure you re-waterproof the board again, in particular the re-soldered joints. Cheers Glenn rorpi - read only raspberry pi + weewx: now with scripts <https://github.com/glennmckechnie/rorpi-raspberrypi> On 18 July 2017 at 06:12, Steve Sykes <[email protected]> wrote: > I have been running my homebrew weather station using a Hobby Boards > humidity sensor. This sensor has been intermittant for the past few months > and I would like to replace it. Hobby boards is no longer in business so I > am wondering what other options are available. What sensor are other OWFS > weather stations using? > > Anyone have a recommendation? > > Regards, > Steve Sykes > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
