Ok, I had set ET = software, which gave me 1 which is 0.1. Switching back to ET =prefere_hardware gave me 5 on the full hour. so it works And that means, the module got the mentioned error. Thanks for pointing out a,d thanks gain for helping me.
Is there any way to report this, so it can be fixed in later releases? Appreciate the support Best Frank ISSUE CLOSED Am Montag, 14. August 2017 13:09:02 UTC+2 schrieb Frank von Thienen: > > Cool, Gary > > will check and report back, > Thanks again. > Your help is really appreciated > Best > Frank > > Am Montag, 14. August 2017 13:04:43 UTC+2 schrieb gjr80: >> >> Frank, >> >> pyc files are automatically re-created if required when you start weeWX, >> so as long as you did the stop/start all is fine. >> >> I suspect the issue is that you are using a Davis station and the station >> only adds ET to archive records at the top of the hour. This is the default >> behaviour. So for every other time ET is None and hence nothing is sent to >> weathercloud for ET. If you have a look at your log for the archive record >> on the hour you should see an ET value being posted. >> >> I'm not sure how this will affect weathercloud. WeeWX does have the >> ability override the default and calculate ET and add it to each archive >> record. I am away from my PC but you should be able to force weeWX to >> calculate ET by adding something like: >> >> ET = software >> >> in weewx.conf under [StdWXCalcute] [[Calculations]]. You will need to >> stop/start weeWX after saving the changes. Monitor your logs and see if ET >> is posted on each archive period. >> >> Gary >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
