While I was rerunning all those commands for my post, here is my syslog: It appears that, it all of the sudden started getting packets while I was running the tests. You can see that weewx started up 5.5 hours before it started getting data from interceptor.
Aug 31 07:59:45 raspberrypiFB weewx[456]: engine: Locale is 'en_GB.UTF-8' Aug 31 07:59:45 raspberrypiFB weewx[456]: engine: pid file is /var/run/weewx.pid Aug 31 07:59:45 raspberrypiFB weewx[362]: Starting weewx weather system: weewx. Aug 31 07:59:45 raspberrypiFB systemd[1]: Started LSB: weewx weather system. Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Using configuration file /etc/weewx/weewx.conf Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Loading station type Interceptor (user.interceptor) Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: driver version is 0.30 Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: device type: acurite-bridge Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: sensor map: None Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: mode is sniff Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: sniff iface=eth0 promiscuous=0 Aug 31 07:59:45 raspberrypiFB weewx[559]: interceptor: MainThread: sniff filter 'src 192.168.5.230 and dst port 80' Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: StdConvert target unit is 0x1 Aug 31 07:59:45 raspberrypiFB weewx[559]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware, windrun=prefer_hardware, heatindex=prefer_hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware Aug 31 07:59:45 raspberrypiFB weewx[559]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Archive will use data binding wx_binding Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Record generation will be attempted in 'hardware' Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Using archive interval of 300 seconds (specified in weewx configuration) Aug 31 07:59:45 raspberrypiFB weewx[559]: engine: Using binding 'wx_binding' to database 'weewx.sdb' Aug 31 07:59:45 raspberrypiFB weewx[559]: manager: Starting backfill of daily summaries Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: StationRegistry: Station will not be registered: no station_url specified. Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: Wunderground: Posting not enabled. Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: PWSweather: Posting not enabled. Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: CWOP: Data for station FW1491 will be posted Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: WOW: Posting not enabled. Aug 31 07:59:46 raspberrypiFB weewx[559]: restx: AWEKAS: Posting not enabled. Aug 31 07:59:46 raspberrypiFB weewx[559]: engine: Starting up weewx version 3.7.1 Aug 31 07:59:46 raspberrypiFB weewx[559]: engine: Starting main packet loop. Aug 31 13:21:41 raspberrypiFB weewx[559]: interceptor: MainThread: skipping rain measurement of 0.3: no last rain Aug 31 13:21:41 raspberrypiFB weewx[559]: engine: garbage collected 0 objects Aug 31 13:21:41 raspberrypiFB weewx[559]: engine: Launch of report thread aborted: existing report thread still running Aug 31 13:21:59 raspberrypiFB weewx[559]: engine: Launch of report thread aborted: existing report thread still running Aug 31 13:22:01 raspberrypiFB weewx[559]: cheetahgenerator: Generated 14 files for report StandardReport in 18.81 seconds Aug 31 13:22:04 raspberrypiFB weewx[559]: imagegenerator: Generated 12 images for StandardReport in 2.66 seconds Aug 31 13:22:04 raspberrypiFB weewx[559]: copygenerator: copied 9 files to /var/www/html/weewx Aug 31 13:22:18 raspberrypiFB weewx[559]: engine: Launch of report thread aborted: existing report thread still running Aug 31 13:22:24 raspberrypiFB weewx[559]: cheetahgenerator: Generated 14 files for report StandardReport in 6.47 seconds Aug 31 13:22:27 raspberrypiFB weewx[559]: imagegenerator: Generated 12 images for StandardReport in 2.56 seconds Aug 31 13:22:27 raspberrypiFB weewx[559]: copygenerator: copied 0 files to /var/www/html/weewx Aug 31 13:22:42 raspberrypiFB weewx[559]: cheetahgenerator: Generated 14 files for report StandardReport in 6.42 seconds Aug 31 13:22:45 raspberrypiFB weewx[559]: imagegenerator: Generated 12 images for StandardReport in 2.56 seconds Aug 31 13:22:45 raspberrypiFB weewx[559]: copygenerator: copied 0 files to /var/www/html/weewx Aug 31 13:22:54 raspberrypiFB weewx[559]: engine: Launch of report thread aborted: existing report thread still running Aug 31 13:23:01 raspberrypiFB weewx[559]: cheetahgenerator: Generated 14 files for report StandardReport in 6.48 seconds Aug 31 13:23:03 raspberrypiFB weewx[559]: imagegenerator: Generated 12 images for StandardReport in 2.63 seconds Aug 31 13:23:03 raspberrypiFB weewx[559]: copygenerator: copied 0 files to /var/www/html/weewx Aug 31 13:23:19 raspberrypiFB weewx[559]: cheetahgenerator: Generated 14 files for report StandardReport in 6.42 seconds Aug 31 13:23:21 raspberrypiFB weewx[559]: imagegenerator: Generated 12 images for StandardReport in 2.63 seconds On Thursday, August 31, 2017 at 2:28:44 PM UTC-4, Eddie Lent wrote: > > I my set up is an acurite smarthub, a raspberry pi 1 running weewx and > weewx-interceptor in sniff mode, port mirroring using netgear GS105Ev2. > > I can't seem to get data into weewx. > I can run tcpdump on my router and see the packets. I can run tcpdump on > the raspberry pi and see packets. > > but I am not getting any data into weewx: > > from weewx.conf: > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge > # observer - fine offset WH2600/HP1000/HP1003, aka 'observer' > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > device_type = acurite-bridge > mode = sniff > iface = eth0 > pcap_filter = src 192.168.5.230 and dst port 80 > > > pi@raspberrypiFB:~ $ tcpdump --version > tcpdump version 4.9.0 > libpcap version 1.6.2 > OpenSSL 1.0.1t 3 May 2016 > > If I run this line while I watch tcpdump on my router to ensure acurite > packets have been sent, I get nothing. > > pi@raspberrypiFB:~ $ sudo PYTHONPATH=/usr/share/weewx python > /usr/share/weewx/user/interceptor.py --device=acurite-bridge --mode=sniff > --iface=eth0 --filter="dst port 80" > ^CTraceback (most recent call last): > File "/usr/share/weewx/user/interceptor.py", line 2060, in <module> > _data = device.get_queue().get(True, 10) > File "/usr/lib/python2.7/Queue.py", line 177, in get > self.not_empty.wait(remaining) > File "/usr/lib/python2.7/threading.py", line 359, in wait > _sleep(delay) > KeyboardInterrupt > Exception in thread ServerThread (most likely raised during interpreter > shutdown): > Traceback (most recent call last): > File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner > File "/usr/lib/python2.7/threading.py", line 763, in run > File "/usr/share/weewx/user/interceptor.py", line 285, in run_server > File "/usr/share/weewx/user/interceptor.py", line 320, in run > File "/usr/lib/python2.7/dist-packages/pcap.py", line 116, in dispatch > <type 'exceptions.AttributeError'>: 'NoneType' object has no attribute > 'pcapObject_dispatch' > > > Here is a tcpdump run: > > pi@raspberrypiFB:~ $ sudo tcpdump -U -i eth0 src 192.168.5.230 and port 80 > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes > 14:12:28.859374 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [S], seq 241058131, > win 400, options [mss 536], length 0 > 14:12:28.887870 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [.], ack 912225648, > win 400, length 0 > 14:12:28.889708 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 0:80, ack > 1, win 400, length 80: HTTP: GET > /weatherstation/updateweatherstation?dateutc=now&action=updateraw&realtime=1[!http] > 14:12:28.920267 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 80:122, ack > 1, win 400, length 42: HTTP > 14:12:28.922539 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 122:149, > ack 1, win 400, length 27: HTTP > 14:12:28.924796 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 149:160, > ack 1, win 400, length 11: HTTP > 14:12:28.931672 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 160:196, > ack 1, win 400, length 36: HTTP > 14:12:28.957005 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 80:196, ack > 1, win 400, length 116: HTTP > 14:12:28.961918 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 196:213, > ack 1, win 400, length 17: HTTP > 14:12:28.963793 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 213:254, > ack 1, win 400, length 41: HTTP > 14:12:28.965296 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [P.], seq 254:277, > ack 1, win 400, length 23: HTTP > 14:12:29.006661 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [.], ack 401, win > 400, length 0 > 14:12:29.032033 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [.], ack 413, win > 389, length 0 > 14:12:29.033168 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [.], ack 413, win > 400, length 0 > 14:12:29.034156 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [F.], seq 277, ack > 413, win 400, length 0 > 14:12:29.034827 IP Acurite.1978 > > ec2-52-22-110-201.compute-1.amazonaws.com.http: Flags [R.], seq 277, ack > 413, win 400, length 0 > ^C > 16 packets captured > 17 packets received by filter > 0 packets dropped by kernel > > nothing is coming out of combine-lines.pl when I try it: > sudo tcpdump -A -U -w - -i eth0 src 192.168.5.230 and port 80 | > /etc/weewx/weewx-interceptor-master/util/combine/combine-lines.pl > tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size > 262144 bytes > ^C1922 packets captured > 1922 packets received by filter > 0 packets dropped by kernel > > Is tcpdump getting all the packet? It seems like only part of the line is > there. > I assume I am missing something obvious, but I am quite frustrated and > don't know what to try next. > Thanks! > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
