weewx just uses the system time - so the fault will not be with the clock itself.
rather than attaching the image of the wrong time, it may be mopre useful to attach the log froom start up until after the second archive period to ensure that the pages are being generated correctly. On Thursday, 14 September 2017 17:59:10 UTC+3, zkab wrote: > I was pretty fed up with the fake-hwclock so I discarded RPi that ran > weewx and began from scratch by installing weewx on a Gigabyte Brix > computer. > The Brix has Ubuntu 16.04.3 LTS with all updates installed and on that > computer I installed weewx Standard v3.7.1 (DEB version). > Still I don't get the time correct ... the fake-hwclock can't be an issue > since I have a RTC in the computer. > All time commands give me correct time except weewx (see the attached > image) ... weewx time doesn't change ... it seems to be hard-wired into the > system ... > I have also given the command 'sudo wee_device /etc/weewx/weewx.conf > --set-time' > I have a ntp-server in my network that Brix uses. > Immediately after a reboot 'ntpq -pn' gives following: > > remote refid st t when poll reach delay offset > jitter > > ============================================================================== > 192.168.0.1 94.246.113.189 3 u 42 64 1 2.943 -132.26 > 0.000 > > What more can I do ? > More info is below: > > $ wee-stop.sh; date; wee-vantage-info.sh; wee-start.sh > tor 14 sep 2017 16:11:22 CEST > Using configuration file /etc/weewx/weewx.conf > Using Vantage driver version 3.0.10 (weewx.drivers.vantage) > Querying... > Davis Vantage EEPROM settings: > > CONSOLE TYPE: VantageVue > > CONSOLE FIRMWARE: > Date: Feb 3 2015 > Version: 4.18 > > CONSOLE SETTINGS: > Archive interval: 300 (seconds) > Altitude: 31 (meter) > Wind cup type: large > Rain bucket type: 0.2 MM > Rain year start: 1 > Onboard time: 2017-09-14 16:11:24 > > CONSOLE DISPLAY UNITS: > Barometer: hPa > Temperature: degree_C > Rain: mm > Wind: meter_per_second > > CONSOLE STATION INFO: > Latitude (onboard): +59.2 > Longitude (onboard): +18.2 > Use manual or auto DST? MANUAL > DST setting: OFF > Use GMT offset or zone code? GMT_OFFSET > Time zone code: N/A > GMT offset: +2.0 hours > > TRANSMITTERS: > Channel 1: iss > Channel 2: (N/A) > Channel 3: (N/A) > Channel 4: (N/A) > Channel 5: (N/A) > Channel 6: (N/A) > Channel 7: (N/A) > Channel 8: (N/A) > > RECEPTION STATS: > Total packets received: 22709 > Total packets missed: 4 > Number of resynchronizations: 0 > Longest good stretch: 18497 > Number of CRC errors: 0 > > BAROMETER CALIBRATION DATA: > Current barometer reading: 29.114 inHg > Altitude: 102 feet > Dew point: 53 F > Virtual temperature: 54 F > Humidity correction factor: 28 > Correction ratio: 1.004 > Correction constant: +0.000 inHg > Gain: 0.000 > Offset: -9.000 > > OFFSETS: > Wind direction: +0 deg > Inside Temperature: +0.0 F > Inside Humidity: +0% > Outside Temperature: +0.0 F > Outside Humidity: +0% > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
