Good Evevning,

thank you a lot for your detailed explainations. I'm still looking for a 
station that talks with my PC. Perhaps I will buy the HP1000 again. 

Best Regards
Joachim 

Am Samstag, 16. September 2017 20:31:00 UTC+2 schrieb Damjan Hajsek:
>
> Ok what I did is this. First I found out a port which is free on my server 
> povej.net where I have fev web pages, so port 80 was already taken so I 
> use port 9999
> I change weewx.conf from port 80 to port 9999, than I opened firewall for 
> port 9999 and than change in Server.ini on my WeatherRanger to 9999.
> But still didn't work, it worked for weather underground but no data on my 
> server, so after alot of sniffing and trying, first I have updated firmware 
> of weather station with ambientweather which is practically the same 
> weather station with the same firmware as WeatherrRanger, so I upgrade it 
> to 2.4.4 (WS-1002) first time I upgrade it I didn't change anything, but 
> second time I change MAIN.INI to my old MAIN.INI, there are some slight 
> differences and than upgrade it. After that I found out that weather 
> station can not send data on 2 places at the same time, so I configure it 
> to send data to my server with weewx and configure weewx to send data to 
> wunderground. After upgrade all settings are changed on console so you need 
> to manually change it back and frequency is differend so before upgrading 
> you need to change frequency to what you have, or better to make a pictures 
> of all of your settings before upgrading, so you can than setup as it was. 
> I made all setings on console and not with EasyWeatherIP. After all of that 
> I turn on EasyWeatherIP and works, like it did before. It wokrs no matter 
> if I send data on weewx or not so you can use both at the same time.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to