I tried this but still doesn't show right value
[StdCalibrate]
[[Corrections]]
radiation = radiation * 0.0046
Dne ponedeljek, 18. september 2017 10.50.34 UTC+2 je oseba Damjan Hajsek
napisala:
>
> I use now ambientweather firmware 2.4.4
> https://ambientweather.wikispaces.com/ws1002-wifi
>
> I tried to find logs but can't, debug = 1 but can't find log file with raw
> data on my centos 7.
>
> I have setup weewx to use mysql database.
> On settings on console I can select, lux or w/m2
>
>
>
>
> Dne nedelja, 17. september 2017 03.12.52 UTC+2 je oseba mwall napisala:
>>
>> On Saturday, September 16, 2017 at 5:16:28 PM UTC-4, Damjan Hajsek wrote:
>>>
>>>
>>> On my WeatherRanger, it show real data on my console, but on weewx I get
>>> insane values like this - Solar Radiation 9580 W/m²
>>> on console I get 46,19 W/m²
>>>
>>> Is there a settings in weewsx to change to get real data?
>>>
>>
>> as a perfectly workable hack you can use the calibration feature of weewx:
>>
>> [StdCalibrate]
>> [[Corrections]]
>> radiation = radiation * 0.0046
>>
>> the fine offset sensors report luminosity, which is typically converted
>> to solar radiation using a simple multiplier. this is only an
>> approximation.
>>
>> the interceptor driver assumes that the station is reporting solar
>> radiation (especially for the fields called 'radiation' and
>> 'solarradiation'). but apparently some of these stations report 'light'
>> (with units of luminosity?) instead of solar radiation.
>>
>> which firmware is the weatherranger running?
>>
>>
>> please post the raw output from the station. it should look something
>> like this:
>>
>>
>>
>> ID=XXX&PASSWORD=XXX&tempf=20&dewptf=18...&action=updateraw&realtime=1&rtfreq=5
>>
>>
>> you can see this raw output by setting debug=1 in weewx.conf then
>> restarting weewx. the raw station output will be in log lines that begin
>> with 'raw data: '
>> in particular, i need to see the 'light', 'radiation' or 'solarradiation'
>> field along with the other parameters. some stations report 'light' when in
>> fact the value is solar radiation, not luminosity. seems to be due to buggy
>> firmware, but to make the interceptor driver work properly i need to know
>> how different firmware versions behave.
>>
>> m
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
