Here are loop packets for rain rate too, it was raining that day so there are fev deifferend results.
http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= Dne četrtek, 21. september 2017 19.43.54 UTC+2 je oseba mwall napisala: > > On Tuesday, September 19, 2017 at 7:54:35 AM UTC-4, Damjan Hajsek wrote: >> >> Rain starts to show up after about 25 minutes but need to be calibrated >> value is too high. I have hardware to measure rain rate. Console show rain >> rate 18mm/h until in real is about 4mm/h. you can see on vreme.povej.net >> >> Dne torek, 19. september 2017 13.38.51 UTC+2 je oseba mwall napisala: >>> >>> >>> 'rain Rate is now 0' is not helpful. is it always 0? what *should* it >>> be? is there always a discrepancy, or just for certain values of rain? >>> are you using software or hardware for rain rate? what is the raw output >>> from the station when rain rate in weewx is not the same as rain rate on >>> the console? >>> >> > post the output from a few LOOP packets (not the log output). for each > LOOP packet you post, post the values for rain and for rain rate that were > displayed on the console. > > while you are watching/recording the output, tip the rain bucket. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
