Just out of curiosity which way does your vane point when there is no wind?? If the vane is slightly off balance/true it could well be biased to point east under no wind conditions!!
On Monday, 25 September 2017 17:25:51 UTC+3, Erik Berg wrote: > This works for me, except on my WMR100 it defaults to East when there is > no wind. Is there any way that it could keep reporting the last wind > direction? > > Erik > > On Wednesday, November 16, 2016 at 3:12:43 PM UTC-6, Tom Keffer wrote: >> >> It should look something like this when you're done. >> >> [StdWXCalculate] >> >> ignore_zero_wind = false >> >> [[Calculations]] >> # Derived quantities are calculated by this service. Possible values >> are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> barometer = prefer_hardware >> altimeter = prefer_hardware >> windchill = prefer_hardware >> heatindex = prefer_hardware >> dewpoint = prefer_hardware >> inDewpoint = prefer_hardware >> rainRate = prefer_hardware >> >> >> If that doesn't solve the problem, then we need to see more of the log. >> You only included one second's worth. We need at least an archive period >> (generally 5 to 10 minutes). >> >> -tk >> >> On Wed, Nov 16, 2016 at 12:01 PM, Paul Weber <[email protected]> wrote: >> >>> Not sure if this is what you want. I did notice however that my insert >>> of "ignore_zero_wind" is at the beginning of the list and not at the end so >>> may >>> be getting canceled? Anyway if this is not what you want let me know. >>> Thanks for your help. >>> >>> >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx. >>> engine.StdTimeSynch >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdTimeSynch >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx. >>> engine.StdConvert >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: StdConvert target unit is >>> 0x1 >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdConvert >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx. >>> engine.StdCalibrate >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdCalibrate >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service weewx. >>> engine.StdQC >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdQC >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.wxservices.StdWXCalculate >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: wxcalculate: The following values >>> will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, >>> dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=hardware, >>> windrun=prefer_hardware, heatindex=prefer_hardware, >>> maxSolarRad=prefer_hardware, humidex=prefer_hardware, >>> pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, >>> altimeter=prefer_hardware, cloudbase=prefer_hardware >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: wxcalculate: The following >>> algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.wxservices.StdWXCalculate >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.engine.StdArchive >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Archive will use data >>> binding wx_binding >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Record generation will be >>> attempted in 'hardware' >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Using archive interval of >>> 300 seconds (specified in weewx configuration) >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Use LOOP data in hi/low >>> calculations: 1 >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Using binding 'wx_binding' >>> to database 'weewx.sdb' >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: manager: Starting backfill of daily >>> summaries >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: manager: Daily summaries up to date >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdArchive >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdStationRegistry >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: StationRegistry: Station >>> will not be registered: no station_url specified. >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdStationRegistry >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdWunderground >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: Wunderground-PWS: Data for >>> station ILOGONEO2 will be posted >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdWunderground >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdPWSweather >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: PWSweather: Posting not >>> enabled. >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdPWSweather >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdCWOP >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: CWOP: Posting not enabled. >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdCWOP >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdWOW >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: WOW: Posting not enabled. >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdWOW >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.restx.StdAWEKAS >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: restx: AWEKAS: Posting not enabled. >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.restx.StdAWEKAS >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.engine.StdPrint >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdPrint >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Loading service >>> weewx.engine.StdReport >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Finished loading service >>> weewx.engine.StdReport >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Starting up weewx version >>> 3.6.2 >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Station does not support >>> reading the time >>> Nov 16 20:30:50 Mobil-1 weewx[8411]: engine: Starting main packet loop. >>> >>> On Wednesday, November 16, 2016 at 4:28:51 PM UTC+1, Tom Keffer wrote: >>>> >>>> Edit weewx.conf, setting debug=1, then restart weewx. Post the system >>>> log from weewx startup through the first archive record --- usually 15 >>>> minutes or so is long enough. >>>> >>>> -tk >>>> >>>> On Wed, Nov 16, 2016 at 4:52 AM, Paul Weber <[email protected]> wrote: >>>> >>>>> Yes I stop it before editing then restart it. >>>>> >>>>> On Tuesday, November 15, 2016 at 9:54:18 PM UTC+1, Tom Keffer wrote: >>>>>> >>>>>> Did you restart weewx after changing weewx.conf? >>>>>> >>>>>> -tk >>>>>> >>>>>> >>>>>> On Tue, Nov 15, 2016 at 12:33 PM, Paul Weber <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Hi, I'm a newb here. I installed weewx 3.6.2 yesterday and am very >>>>>>> pleased with my success however I am experiencing this problem as >>>>>>> well. (dotted lines on WU map indicating lack of data) Also my >>>>>>> weewx out put says 0 m/s from N/A (N/A) My site is ILOGONEO2. I >>>>>>> made the change in my config to ignore_zero_wind = false as >>>>>>> suggested and there is no change. I am using a WMR100NA weather >>>>>>> station. >>>>>>> Also my station does not appear on weewx map either even though I >>>>>>> have set publish = true >>>>>>> >>>>>>> >>>>>>> On Saturday, November 12, 2016 at 6:06:32 AM UTC+1, Denny Page wrote: >>>>>>>> >>>>>>>> A moment presented itself. It does appear that this is fixed in >>>>>>>> 3.6.2. I’ll have to double check tomorrow when wind comes and >>>>>>>> goes, but it looks good right now when everything is completely calm. >>>>>>>> >>>>>>>> Thank you so much for fixing this. Greatly appreciated. >>>>>>>> >>>>>>>> Denny >>>>>>>> >>>>>>>> >>>>>>>> On Nov 11, 2016, at 20:27, Denny Page <[email protected]> wrote: >>>>>>>> >>>>>>>> I haven’t checked 3.6, but in 3.5 setting ignore_zero_wind didn’t >>>>>>>> fix a Vantage with rapidfire updates. It seemed to be a “known” >>>>>>>> issue at the time, but I haven’t seen anything in the release notes >>>>>>>> about >>>>>>>> it. >>>>>>>> >>>>>>>> I’ll check 3.6.X as soon as I have a chance. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Denny >>>>>>>> >>>>>>>> >>>>>>>> On Nov 11, 2016, at 18:36, Thomas Keffer <[email protected]> wrote: >>>>>>>> >>>>>>>> OK, that's a different problem, one that is easily solved. Just set >>>>>>>> option ignore_zero_wind to false >>>>>>>> <http://weewx.com/docs/usersguide.htm#StdWXCalculate>. >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
