The hardware guide gives the pointers http://weewx.com/docs/hardware.htm#vantage_data21
To see the data on the reports you more than likely will have to edit the template files and/or the skin. The template edits would enable display of extra temp1, extra humid1 fields etc The skin edits would be to generate graphs from the additional readings On Thursday, 12 October 2017 11:02:46 UTC+3, [email protected] wrote: > Hi there Weewx'ers > > I've recently added the leaf and soil station and really wanting to get > the readings off of the moisture sensors, especially, but not getting very > far. > > Sensors are working fine and reporting to the Davis console.. also 1st > Moisture and Temperature sensors report to WeatherUnderground just fine. > I will end up having 4 moisture sensors (1,2,3,4) and two temperature > (1,3). > > > Here's relevant output of weewx_device --info > > CONSOLE TYPE: VantagePro2 > > CONSOLE FIRMWARE: > Date: Sep 29 2009 > Version: 1.90 > > TRANSMITTERS: > Channel 1: iss > Channel 2: leaf_soil > Channel 3: (N/A) > Channel 4: (N/A) > Channel 5: (N/A) > Channel 6: (N/A) > Channel 7: (N/A) > Channel 8: (N/A) > > So I tried putting this in: > wee_device --set-transmitter-type=2,8,1,1 > > Not really sure what to do next.. nothing shows up in reports and I can't > find any documentation to assist. > > I appreciate any pointers! > > Thanks > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
