I think I got it. Somehow the mode on the base reverted back to mode 2 instead of mode 3.
keeping my fingers crossed. thanks again Tom. I appreciate the help. Don On Sun, Oct 15, 2017 at 7:06 PM, MrD308 . <[email protected]> wrote: > > ok thanks, > > > Here is the data with debug on. Doesnt look like its seeing th device? > > root@raspberrypi:/home/pi# sudo tail -f /var/log/syslog > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Loading service > weewx.engine.StdPrint > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Finished loading service > weewx.engine.StdPrint > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Loading service > weewx.engine.StdReport > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Finished loading service > weewx.engine.StdReport > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Starting up weewx version > 3.7.1 > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Station does not support > reading the time > Oct 15 18:57:17 raspberrypi weewx[1813]: engine: Starting main packet loop. > Oct 15 18:57:17 raspberrypi weewx[1813]: manager: Daily summary version is > 2.0 > Oct 15 18:57:17 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:57:18 raspberrypi weewx[1813]: acurite: Failed attempt 1 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 18:57:48 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:57:49 raspberrypi weewx[1813]: acurite: Failed attempt 2 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 18:58:19 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:58:20 raspberrypi weewx[1813]: acurite: Failed attempt 3 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 18:58:50 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:58:51 raspberrypi weewx[1813]: acurite: Failed attempt 4 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 18:59:21 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:59:22 raspberrypi weewx[1813]: acurite: Failed attempt 5 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 18:59:52 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 18:59:53 raspberrypi weewx[1813]: acurite: Failed attempt 6 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 19:00:19 raspberrypi systemd[1]: Starting Cleanup of Temporary > Directories... > Oct 15 19:00:19 raspberrypi systemd[1]: Started Cleanup of Temporary > Directories. > Oct 15 19:00:23 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 19:00:23 raspberrypi weewx[1813]: acurite: Failed attempt 7 of 10 > to get LOOP data: [Errno 32] Pipe error > Oct 15 19:00:53 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 19:00:54 raspberrypi weewx[1813]: acurite: Failed attempt 8 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 19:01:25 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 19:01:25 raspberrypi weewx[1813]: acurite: Failed attempt 9 of 10 > to get LOOP data: [Errno 32] Pipe error > Oct 15 19:01:55 raspberrypi weewx[1813]: acurite: Found station at bus= > device= > Oct 15 19:01:56 raspberrypi weewx[1813]: acurite: Failed attempt 10 of 10 > to get LOOP data: [Errno 110] Operation timed out > Oct 15 19:02:26 raspberrypi weewx[1813]: acurite: Max retries (10) > exceeded for LOOP data > Oct 15 19:02:26 raspberrypi weewx[1813]: engine: Main loop exiting. > Shutting engine down. > Oct 15 19:02:26 raspberrypi weewx[1813]: restx: Shut down Wunderground-PWS > thread. > Oct 15 19:02:26 raspberrypi weewx[1813]: engine: Caught WeeWxIOError: Max > retries (10) exceeded for LOOP data > Oct 15 19:02:26 raspberrypi weewx[1813]: **** Waiting 60 seconds then > retrying... > > > On Sun, Oct 15, 2017 at 6:53 PM, Thomas Keffer <[email protected]> wrote: > >> The program should not even start with those lines in the config file: it >> is a fatal error to have duplicate options in a ConfigObj file. >> >> In any case, it's impossible to do a diagnosis without the log. Set >> debug=1, restart weewx, post from the restart. >> >> -tk >> >> >> On Sun, Oct 15, 2017 at 6:39 PM, MrD308 . <[email protected]> wrote: >> >>> Hi Tom, >>> >>> I feel pretty dumb right about now. However, I added those lines because >>> I'm getting a "acurite: Failed attempt X of X to get LOOP data. >>> If I leave that code in, the loop data error goes away but then I get >>> the other line 20 error. >>> So I removed and rebooted and am back to the loop errors >>> >>> Thanks.. >>> >>> Don. >>> >>> On Sun, Oct 15, 2017 at 6:06 PM, Thomas Keffer <[email protected]> >>> wrote: >>> >>>> Pretty simple, really: you have several duplicate lines near the top of >>>> your weewx.conf file, as well as one with a syntax error. Just remove all >>>> the offending lines. >>>> >>>> Remove these: >>>> >>>> debug = 1 >>>> loop_on_init = True >>>> WEEWX_ROOT = ... >>>> socket_timeout = 20 >>>> version = 3.5.0 >>>> >>>> >>>> Leave everything else. >>>> >>>> -tk >>>> >>>> >>>> On Sun, Oct 15, 2017 at 5:58 PM, MrD308 <[email protected]> wrote: >>>> >>>>> Hello all, >>>>> >>>>> Its been a few years since I got my Acurite 5-1 station working. >>>>> Everything was fine then the 5-1 sensor failed. I bought the new 5-1 and >>>>> everything is up and running except for weewx and WU. Im using the same >>>>> RPI >>>>> but it would not start talking to WU. I looked at the logs and saw a lot >>>>> of >>>>> errors. >>>>> As I said, it used to run fine on this platform. >>>>> I ended up reloading everything. New Debian download and new WeeWx. >>>>> Now it wont communicate with WU. The logs look good except one spot for >>>>> line 20 n the WeeWx.conf file. >>>>> Its been a couple of years since I set this up last time. >>>>> I've been playing with this all day trying to figure it out. >>>>> >>>>> Does anyone see a blatant mistake? >>>>> >>>>> Thank you for any help you can provide. >>>>> >>>>> Don >>>>> >>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>>>> Oct 15 17:11:42 raspberrypi weewx[2200]: engine: Locale is >>>>> 'en_GB.UTF-8' >>>>> Oct 15 17:11:42 raspberrypi weewx[2200]: engine: pid file is >>>>> /var/run/weewx.pid >>>>> Oct 15 17:11:42 raspberrypi weewx[2204]: engine: Error while parsing >>>>> configuration file /etc/weewx/weewx.conf >>>>> Oct 15 17:11:42 raspberrypi weewx[2204]: **** Reason: 'Parsing >>>>> failed with several errors.#012First error at line 20.' >>>>> Oct 15 17:11:42 raspberrypi weewx[2189]: Starting weewx weather >>>>> system: weewx. >>>>> Oct 15 17:11:42 raspberrypi systemd[1]: Started LSB: weewx weather >>>>> system. >>>>> Oct 15 17:17:01 raspberrypi CRON[2385]: (root) CMD ( cd / && >>>>> run-parts --report /etc/cron.hourly) >>>>> Oct 15 17:18:56 raspberrypi systemd[1]: Stopping LSB: weewx weather >>>>> system... >>>>> Oct 15 17:18:56 raspberrypi weewx[2437]: Stopping weewx weather >>>>> system: weewx not running.... >>>>> Oct 15 17:18:56 raspberrypi systemd[1]: Stopped LSB: weewx weather >>>>> system. >>>>> >>>>> >>>>> Here is part of the weewx.conf if that will help. >>>>> # WEEWX CONFIGURATION FILE >>>>> # >>>>> # Copyright (c) 2009-2015 Tom Keffer <[email protected]> >>>>> # See the file LICENSE.txt for your rights. >>>>> >>>>> ############################################################ >>>>> ################## >>>>> debug = 1 >>>>> loop_on_init = True >>>>> WEEWX_ROOT = ... >>>>> socket_timeout = 20 >>>>> version = 3.5.0 >>>>> >>>>> >>>>> # This section is for general configuration information. >>>>> >>>>> # Set to 1 for extra debug info, otherwise comment it out or set to >>>>> zero >>>>> # debug = 0 >>>>> >>>>> # Root directory of the weewx data file hierarchy for this station >>>>> WEEWX_ROOT = / >>>>> >>>>> # How long to wait before timing out a socket (FTP, HTTP) connection >>>>> socket_timeout = 20 >>>>> >>>>> # Do not modify this. It is used when installing and updating weewx. >>>>> version = 3.7.1 >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> # This section is for information about the station. >>>>> >>>>> [Station] >>>>> >>>>> # Description of the station location >>>>> location = Crown Point, 92109 >>>>> >>>>> # Latitude and longitude in decimal degrees >>>>> latitude = 32.785 >>>>> longitude = -117.238 >>>>> >>>>> # Altitude of the station, with unit it is in. This is downloaded >>>>> from >>>>> # from the station if the hardware supports it. >>>>> altitude = 46, foot >>>>> >>>>> # Set to type of station hardware. There must be a corresponding >>>>> stanza >>>>> # in this file with a 'driver' parameter indicating the driver to >>>>> be used. >>>>> station_type = AcuRite >>>>> >>>>> # If you have a website, you may specify an URL >>>>> #station_url = http://www.example.com >>>>> >>>>> # The start of the rain year (1=January; 10=October, etc.). This is >>>>> # downloaded from the station if the hardware supports it. >>>>> rain_year_start = 1 >>>>> >>>>> # Start of week (0=Monday, 6=Sunday) >>>>> week_start = 6 >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> [AcuRite] >>>>> # This section is for AcuRite weather stations. >>>>> >>>>> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >>>>> model = AcuRite 0232C >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.acurite >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> # This section is for uploading data to Internet sites >>>>> >>>>> [StdRESTful] >>>>> >>>>> [[StationRegistry]] >>>>> # To register this weather station with weewx, set this to true >>>>> register_this_station = true >>>>> >>>>> >>>>> [[Wunderground]] >>>>> # This section is for configuring posts to the Weather >>>>> Underground. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station (e.g., 'KORHOODR3') and password. >>>>> enable = true >>>>> station = KCASANDI495 >>>>> # To guard against parsing errors, put your password in quotes: >>>>> password = xxxxxxxx >>>>> >>>>> # Set the following to True to have weewx use the WU >>>>> "Rapidfire" >>>>> # protocol. Not all hardware can support it. See the User's >>>>> Guide. >>>>> rapidfire = False >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> # This section specifies what reports, using which skins, to >>>>> generate. >>>>> >>>>> [StdReport] >>>>> >>>>> # Where the skins reside, relative to WEEWX_ROOT >>>>> SKIN_ROOT = /etc/weewx/skins >>>>> >>>>> # Where the generated reports should go, relative to WEEWX_ROOT >>>>> HTML_ROOT = /var/www/html/weewx >>>>> >>>>> # The database binding indicates which data should be used in >>>>> reports. >>>>> data_binding = wx_binding >>>>> >>>>> # Each of the following subsections defines a report that will be >>>>> run. >>>>> >>>>> [[StandardReport]] >>>>> # See the customizing guide to change the units, plot types >>>>> and line >>>>> # colors, modify the fonts, display additional sensor data, >>>>> and other >>>>> # customizations. Many of those changes can be made here by >>>>> overriding >>>>> # parameters, or by modifying templates within the skin itself. >>>>> >>>>> # The StandardReport uses the 'Standard' skin, which contains >>>>> the >>>>> # images, templates and plots for the report. >>>>> skin = Standard >>>>> [[[Units]]] >>>>> [[[[Groups]]]] >>>>> group_altitude = foot >>>>> group_speed2 = mile_per_hour2 >>>>> group_pressure = inHg >>>>> group_rain = inch >>>>> group_rainrate = inch_per_hour >>>>> group_temperature = degree_F >>>>> group_degree_day = degree_F_day >>>>> group_speed = mile_per_hour >>>>> >>>>> [[FTP]] >>>>> # FTP'ing the results to a webserver is treated as just >>>>> another report, >>>>> # albeit one with an unusual report generator! >>>>> skin = Ftp >>>>> >>>>> # If you wish to use FTP, uncomment and fill out the next four >>>>> lines. >>>>> #user = replace with the ftp username >>>>> #password = replace with the ftp password; put in quotes to >>>>> guard against parsing errors. >>>>> #server = replace with the ftp server name, e.g, >>>>> www.threefools.org >>>>> #path = replace with the ftp destination directory (e.g., >>>>> /weather) >>>>> >>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>>>> servers >>>>> # support this. >>>>> secure_ftp = False >>>>> >>>>> # To upload files from something other than what HTML_ROOT is >>>>> set >>>>> # to above, specify a different HTML_ROOT here. >>>>> #HTML_ROOT = /var/www/html/weewx >>>>> >>>>> # Most FTP servers use port 21 >>>>> port = 21 >>>>> >>>>> # Set to 1 to use passive mode, zero for active mode >>>>> passive = 1 >>>>> >>>>> [[RSYNC]] >>>>> # rsync'ing to a webserver is treated as just another report >>>>> skin = Rsync >>>>> >>>>> # If you wish to use rsync, you must configure passwordless >>>>> ssh using >>>>> # public/private key authentication from the user account that >>>>> weewx >>>>> # runs as to the user account on the remote machine where the >>>>> files >>>>> # will be copied. >>>>> # >>>>> # The following three lines determine where files will be sent. >>>>> #server = replace with the rsync server name, e.g, >>>>> www.threefools.org >>>>> #path = replace with the rsync destination directory (e.g., >>>>> /weather) >>>>> #user = replace with the rsync username >>>>> >>>>> # Rsync can be configured to remove files from the remote >>>>> server if >>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: >>>>> if you >>>>> # make a mistake in the remote path, you could could >>>>> unintentionally >>>>> # cause unrelated files to be deleted. Set to 1 to enable >>>>> remote file >>>>> # deletion, zero to allow files to accumulate remotely. >>>>> delete = 0 >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> # This service acts as a filter, converting the unit system coming >>>>> from >>>>> # the hardware to a unit system in the database. >>>>> >>>>> [StdConvert] >>>>> >>>>> # The target_unit affects only the unit system in the database. >>>>> Once >>>>> # chosen it cannot be changed without converting the entire >>>>> database. >>>>> # Modification of target_unit after starting weewx will result in >>>>> # corrupt data - the database will contain a mix of US and METRIC >>>>> data. >>>>> # >>>>> # The value of target_unit does not affect the unit system for >>>>> # reporting - reports can display US, Metric, or any combination >>>>> of units. >>>>> # >>>>> # In most cases, target_unit should be left as the default: US >>>>> # >>>>> # In particular, those migrating from a standard wview installation >>>>> # should use US since that is what the wview database contains. >>>>> >>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >>>>> >>>>> ############################################################ >>>>> ################## >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>>> pic/weewx-user/Qmp8BY0zzkE/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit https://groups.google.com/d/to >> pic/weewx-user/Qmp8BY0zzkE/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
