Our messages crossed in the ether. Only one of those packets, the one at 13:22:55, had a value for pressure, and then it had no value for outTemp.
That's why it's unable to calculate barometer. -tk On Thu, Oct 26, 2017 at 10:24 AM, Robert Mantel <[email protected]> wrote: > Here's the result running from command line. I'm getting pressure in the > loop packet and in the archive (my realtime gauges are working perfectly), > and weewx is calculating the altitude and barometer in the REC: line: > > LOOP: 2017-10-26 13:22:25 EDT (1509038545) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038545, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 45.0, > windSpeed: 15.63 > LOOP: 2017-10-26 13:22:30 EDT (1509038550) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038550, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 315.0, > windSpeed: 7.82 > LOOP: 2017-10-26 13:22:35 EDT (1509038555) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038555, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 45.0, > windSpeed: 10.41 > LOOP: 2017-10-26 13:22:40 EDT (1509038560) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038560, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 135.0, > windSpeed: 13.03 > LOOP: 2017-10-26 13:22:45 EDT (1509038565) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038565, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 90.0, > windSpeed: 16.29 > LOOP: 2017-10-26 13:22:50 EDT (1509038570) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038570, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 45.0, > windSpeed: 21.5 > LOOP: 2017-10-26 13:22:55 EDT (1509038575) altimeter: 29.8273861589, > appTemp: None, barometer: None, cloudbase: None, dateTime: 1509038575, > dewpoint: None, heatindex: None, humidex: None, inDewpoint: 50.1986834302, > inHumidity: 45.330078, inTemp: 72.572006, maxSolarRad: None, pressure: > 29.15587, rainRate: 0, usUnits: 1, windchill: None, windDir: 90.0, > windSpeed: 14.97 > LOOP: 2017-10-26 13:23:00 EDT (1509038580) altimeter: None, appTemp: > 32.1391735953, barometer: None, cloudbase: 1125.93849604, dateTime: > 1509038580, dewpoint: 39.9264025125, heatindex: 42.08, humidex: 42.08, > inDewpoint: None, maxSolarRad: None, outHumidity: 92.0, outTemp: 42.08, > pressure: None, rain: 0.0, rainRate: 0, usUnits: 1, windchill: > 34.9006432956, windDir: 113.0, windSpeed: 13.68 > LOOP: 2017-10-26 13:23:05 EDT (1509038585) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038585, dewpoint: > 39.93, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, soc: 89.0, usUnits: 1, volts: 4.0, windchill: > None, windDir: 45.0, windGust: 35.19, windGustDir: 135.0, windSpeed: 14.23 > LOOP: 2017-10-26 13:23:10 EDT (1509038590) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038590, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 90.0, > windSpeed: 8.57 > LOOP: 2017-10-26 13:23:15 EDT (1509038595) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038595, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 135.0, > windSpeed: 11.07 > REC: 2017-10-26 13:23:00 EDT (1509038580) altimeter: 29.8273861589, > appTemp: 32.1391735953, barometer: 29.8575977906, cloudbase: 1125.93849604, > dateTime: 1509038580.0, dewpoint: 39.9264025125, ET: None, heatindex: > 42.08, humidex: 42.08, inDewpoint: 50.1986834302, inHumidity: 45.330078, > inTemp: 72.572006, interval: 1, maxSolarRad: None, outHumidity: 92.0, > outTemp: 42.08, pressure: 29.15587, rain: 0.0, rainRate: 0.0, usUnits: 1, > windchill: 34.749378665, windDir: 73.1448376605, windGust: 21.5, > windGustDir: 45.0, windrun: 99.7105479317, windSpeed: 14.16625 > LOOP: 2017-10-26 13:23:21 EDT (1509038601) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038601, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 135.0, > windSpeed: 9.77 > LOOP: 2017-10-26 13:23:26 EDT (1509038606) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038606, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 135.0, > windSpeed: 14.45 > LOOP: 2017-10-26 13:23:31 EDT (1509038611) altimeter: None, appTemp: > None, barometer: None, cloudbase: None, dateTime: 1509038611, dewpoint: > None, heatindex: None, humidex: None, inDewpoint: None, maxSolarRad: None, > pressure: None, rainRate: 0, usUnits: 1, windchill: None, windDir: 90.0, > windSpeed: 19.55 > > So I'm stumped. > > On Thursday, 26 October 2017 12:43:24 UTC-4, Tom Keffer wrote: >> >> The WU uploader will simply skip a value that is missing or is set to >> Python None. >> >> Run weewx from the command line. It will print out the values of all >> variables retrieved from the weather station and/or calculated. I'm betting >> barometer is missing from your packets. >> >> As for why, that would depend on the details of the wxMesh driver and >> your hardware setup, which I'm not privy to. >> >> -tk >> >> On Thu, Oct 26, 2017 at 8:47 AM, Robert Mantel <[email protected]> wrote: >> >>> I set debug to 2 and using rapidfire with WU, I'm not seeing any >>> pressure being sent from the syslog at all, which is reflected on my WU >>> page. I'm using wxmesh driver and I have the windspeed and direction >>> updating as quickly as my arduino based system is posting changes to my >>> mqtt database. All other values get updated once a minute (no reason to >>> update these more often). I'm wondering if this is causing headaches for >>> WU? From what I read in the forum here so far, WU seems to have a lot of >>> issues in this regard, so perhaps there is no fix for this, but it's >>> curious that I'm not seeing any pressure data at least being sent out. Any >>> ideas why? Also dew point is being reported very sporadically as well. >>> Here is a section of the syslog after both values have been picked up from >>> the wxmesh driver: >>> >>> Oct 26 11:45:43 raspberrypi weewx[11171]: ftpgenerator: FTP upload not >>> requested. Skipped. >>> Oct 26 11:45:43 raspberrypi weewx[11171]: reportengine: Running report >>> RSYNC >>> Oct 26 11:45:43 raspberrypi weewx[11171]: reportengine: Found >>> configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC >>> Oct 26 11:45:43 raspberrypi weewx[11171]: rsyncgenerator: rsync upload >>> not requested. Skipped. >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: dateTime 1509032747 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: soc = 89 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: dewpoint = 39.11 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: outHumidity = 91 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: volts = 4.00 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: rain = 0.000 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windDir = 135 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: outTemp = 41.54 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windSpeed = 22.80 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windGust = 36.50 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windGustDir = 135 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: rtgd: queued loop packet >>> (1509032747) >>> Oct 26 11:45:46 raspberrypi weewx[11171]: rtgdthread: received loop >>> packet (1509032747) >>> Oct 26 11:45:46 raspberrypi weewx[11171]: restx: Ambient: url: >>> http://rtupdate.wunderground.com/weatherstation/updateweathe >>> rstation.php?action=updateraw&ID=ITHUNDER5&PASSWORD=XXX& >>> softwaretype=weewx-3.7.1&windgustmph=36.5&humidity=091& >>> dailyrainin=0.13&winddir=135&tempf=41.5&windspeedmph=22.8& >>> rtfreq=2.5&rainin=0.07&dewptf=39.1&dateutc=2017-10-26%2015% >>> 3A45%3A47&realtime=1 >>> Oct 26 11:45:46 raspberrypi weewx[11171]: rtgdthread: created cached >>> loop packet (1509032747) >>> Oct 26 11:45:46 raspberrypi weewx[11171]: rtgdthread: gauge-data.txt >>> (1509032747) generated in 0.01306 seconds >>> Oct 26 11:45:51 raspberrypi weewx[11171]: wxMesh: dateTime 1509032752 >>> Oct 26 11:45:51 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windDir = 135 >>> Oct 26 11:45:51 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windSpeed = 19.59 >>> Oct 26 11:45:51 raspberrypi weewx[11171]: rtgd: queued loop packet >>> (1509032752) >>> Oct 26 11:45:51 raspberrypi weewx[11171]: rtgdthread: received loop >>> packet (1509032752) >>> Oct 26 11:45:51 raspberrypi weewx[11171]: rtgdthread: created cached >>> loop packet (1509032752) >>> Oct 26 11:45:51 raspberrypi weewx[11171]: restx: Ambient: url: >>> http://rtupdate.wunderground.com/weatherstation/updateweathe >>> rstation.php?action=updateraw&ID=ITHUNDER5&PASSWORD=XXX& >>> softwaretype=weewx-3.7.1&windgustmph=36.5&humidity=091& >>> dailyrainin=0.13&winddir=135&tempf=41.5&windspeedmph=19.6& >>> rtfreq=2.5&rainin=0.07&dateutc=2017-10-26%2015%3A45%3A52&realtime=1 >>> Oct 26 11:45:51 raspberrypi weewx[11171]: rtgdthread: gauge-data.txt >>> (1509032752) generated in 0.01303 seconds >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: dateTime 1509032757 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windDir = 135 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: pressure = 29.173296 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windSpeed = 21.49 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: inHumidity = 46.128906 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: inTemp = 72.517998 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: rtgd: queued loop packet >>> (1509032757) >>> Oct 26 11:45:56 raspberrypi weewx[11171]: rtgdthread: received loop >>> packet (1509032757) >>> Oct 26 11:45:56 raspberrypi weewx[11171]: rtgdthread: created cached >>> loop packet (1509032757) >>> Oct 26 11:45:56 raspberrypi weewx[11171]: restx: Ambient: url: >>> http://rtupdate.wunderground.com/weatherstation/updateweathe >>> rstation.php?action=updateraw&ID=ITHUNDER5&PASSWORD=XXX& >>> softwaretype=weewx-3.7.1&windgustmph=36.5&humidity=091& >>> dailyrainin=0.13&winddir=135&tempf=41.5&windspeedmph=21.5& >>> rtfreq=2.5&rainin=0.07&dateutc=2017-10-26%2015%3A45%3A57&realtime=1 >>> Oct 26 11:45:56 raspberrypi weewx[11171]: rtgdthread: gauge-data.txt >>> (1509032757) generated in 0.02435 seconds >>> Oct 26 11:46:01 raspberrypi weewx[11171]: wxMesh: dateTime 1509032762 >>> Oct 26 11:46:01 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windDir = 135 >>> Oct 26 11:46:01 raspberrypi weewx[11171]: wxMesh: buffer content for >>> key: windSpeed = 22.29 >>> Oct 26 11:46:01 raspberrypi rsyslogd-2007: action 'action 17' suspended, >>> next retry is Thu Oct 26 11:47:31 2017 [try >>> http://www.rsyslog.com/e/2007 ] >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgd: queued loop packet >>> (1509032762) >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgdthread: received loop >>> packet (1509032762) >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgdthread: created cached >>> loop packet (1509032762) >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgd: queued >>> weewx.END_ARCHIVE_PERIOD event >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgdthread: gauge-data.txt >>> (1509032762) generated in 0.01129 seconds >>> Oct 26 11:46:01 raspberrypi weewx[11171]: rtgdthread: received event - >>> END_ARCHIVE_PERIOD >>> Oct 26 11:46:01 raspberrypi weewx[11171]: restx: Ambient: url: >>> http://rtupdate.wunderground.com/weatherstation/updateweathe >>> rstation.php?action=updateraw&ID=ITHUNDER5&PASSWORD=XXX& >>> softwaretype=weewx-3.7.1&windgustmph=36.5&humidity=091& >>> dailyrainin=0.13&winddir=135&tempf=41.5&windspeedmph=22.3& >>> rtfreq=2.5&rainin=0.07&dateutc=2017-10-26%2015%3A46%3A02&realtime=1 >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
