Thank's for your answer.
I am having some "extrange" problem with wlink driver.
It is only downloading data from archive, not real time data.
This is my debug: What do you think?
It downloads only data around 60 minutes past.
Using verbosity=1, displaying most info
wee_debug output will be sent to stdout(console)
Using configuration file ./weewx-cabo.conf
Using database binding 'wx_binding', which is bound to database
'archive_sqlite'
System info
Platform: Linux-4.4.50-v7+-armv7l-with-debian-8.0
Python Version: 2.7.9
Load Information
1 minute load average: 0.25
5 minute load average: 0.27
15 minute load average: 0.19
General Weewx info
Weewx version 3.8.0 detected.
Station info
Station type: WeatherLink
Driver: user.wlink
Driver info
[WeatherLink]
username = xxxxx
password = xxxxx
driver = user.wlink
poll_interval = 60
# download_archive_interval = 60
archive_interval = 60
Currently installed extensions
Extension Name Version Description
wlink 0.11 driver that collects data from weatherlink.com
wcloud 0.10 Upload weather data to WeatherCloud.
forecast 3.2.14 Generate and display weather and tide forecasts.
Archive info
Database name: cabo.sdb
Table name: archive
Unit system: 1 (US)
First good timestamp: 2017-05-03 13:00:00 CEST (1493809200)
Last good timestamp: 2017-12-11 14:30:00 CET (1512999000)
Number of records: 10659
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: cabo.sdb
Database driver: weedb.sqlite
Database name: cabo
Database driver: weedb.mysql
Database host: localhost
Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Santa Pola
# Latitude and longitude in decimal degrees
latitude = 38.1295
longitude = -0.3089
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 50, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = WeatherLink
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX
##############################################################################
[WeatherLink]
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
driver = user.wlink
poll_interval = 60
# download_archive_interval = 60
archive_interval = 60
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
description = Cabo de Santa Pola
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = XXX obfuscated by wee_debug XXX
passcode = 23009
post_interval = 300
log_success = True
log_failure = True
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = false
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/cabo
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = cabo
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = km_per_hour2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = km_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = meteoelche.es
#password = Ruben5454
#server = 217.76.150.81
#path = /html
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g,
www.threefools.org
#path = replace with the rsync destination directory (e.g.,
/weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
# windSpeed = 0
# windGust = 0
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 800, 1100, hPa
outTemp = -20, 55, degree_C
inTemp = 0, 50, degree_C
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 200, km_per_hour
pressure = 800, 1100, hPa
# [[Spike]]
# windSpeed = 15, 6, km_per_hour
# windGust = 15, 6, km_per_hour
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = software
heatindex = software
dewpoint = software
inDewpoint = software
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = cabo.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = cabo
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ""
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
wee_debug report successfully generated
El domingo, 10 de diciembre de 2017, 22:14:53 (UTC+1), mwall escribió:
>
> ruben,
>
> it looks like you are getting bad data from weatherlink. you should
> inspect your weatherlink data to see if all of it is corrupt or if only
> some of it has problems.
>
> it might be only the historical data that are bad, or only a portion of
> the historical data.
>
> m
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
