Yes, software seems to be working fine now. Outside Temperature -9.6°F Wind Chill -26.9°F Heat Index -9.6°F Dewpoint -34.3°F Humidity 27% Barometer 30.599 inHg Barometer Trend (3 hours) 0.057 inHg Wind 9 mph from 270° (W) Rain Rate 0.00 in/hr Inside Temperature 62.1°F Inside Humidity 25%
On Tuesday, December 26, 2017 at 7:45:12 AM UTC-6, Mark Jenks wrote: > > Yes, windchill is correct on the station. Says -30F right now. > > I'm going to try switching it to software to see if it fixes it for now. > > I have a feeling that the driver isn't grabbing it correctly. > > -Mark > > On Tuesday, December 26, 2017 at 3:54:03 AM UTC-6, gjr80 wrote: >> >> Hmm, accoding to the Hardware Guide ( >> http://weewx.com/docs/hardware.htm#wmr200_notes) the WMR200 calculates >> and provides windchill to weeWX. So it's likely either the WMR200 driver is >> decoding windchill incorrectly or the station is outputting nonsense >> windchill now and then. Does windchill always display correctly on the >> station? Probably need a WMR200 expert I suspect. >> >> You could force weeWX to calculate windchill by setting >> windchill=software under StdWXCalculate in weewx.conf but this will only >> give you a windchill value when you have non-None values for outTemp AND >> windSpeed in the packet/record. Arguably this is only masking the issue >> rather than fixing it. >> >> Gary >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
